search results

  1. 5500W Tankless Instant Electric Water Heater with Touch Panel Remote Control

    Features 1、[Easy Installation] Instant electric water heater, small size, fast heating, simple and convenient installation, suitable for kitchens, toilets, showers and other places. 2、[Intelligent Constant Temperature] The temperature range is 30‑55℃, suitable for daily washing, hand washing, dish washing, vegetable washing, face washing, bathing, etc. 3、[Rapid Heating] Electric water heaters can instantly provide continuous hot water at 30℃ or higher without waiting for preheating or terrible temperature rises and drops. 4、[Easy To Use] Equipped with digital display and touch control panel, easy to set the temperature, and can also be turned on or off by remote control to adjust the temperature. 5、[High Safety] Multiple protection devices, the internal water and electricity lines are designed for branch operation to avoid water leakage or scale accumulation hazards. Specifications Item Type: Water Heater Material: Aluminum Die Casting+PC+Brass Weight: Approx. 1780g / 62.8oz Model: LF-001 Heating Body Material: Aluminum Die Casting Voltage: 220V Power: 5500W Frequency: 50-60HZ Wire: 2.5m㎡ Remote Control Power Supply: 2 x AAA Battery (Battery Not Included) Temperature Range: 30-55℃ Product Size: Approx. 21x15x5.5cm / 8.3x5.9x2.2in Water Source Pressure: 0.04-1.2MPa Installation Environment Requirements: Kitchen, bathroom, toilet, shower room, wire requirements greater than 2.5mm²; circuit breaker switch greater than 32amp Common Faults and Solutions: 1. Check whether the power supply is normally energized, the indicator will light up to show the temperature when the power is on, and it will not light up if it is not energized. 2. Under normal power‑on conditions, the water flow is turned on, press the middle switch key, the machine starts heating, and the water heater displays: set temperature, water flow, water outlet temperature. 3. If the temperature does not rise, there are two possibilities: one is the temperature control switch (overheat protection switch) inside the water heater, which can be recovered by pressing the temperature control switch; the other is the heating pipe failure, just replace the heat pipe 4. If there is no heating, the display shows the temperature, but the water flow and the set temperature are not displayed, indicating that the water flow has not passed through the water heater, or the water pressure is too low, or the installation direction is wrong. Note that the water inlet and outlet must be installed correctly. If the pressure is enough and the water does not heat up, then check the water heater inlet turbine, there may be dirt stuck in the turbine, causing the water heater to not start. 5. It is recommended that the length of the water outlet pipe of the water heater should not exceed 3 meters. If it exceeds, there may be a water pressure difference due to the length of the water pipe, and the water pressure is not enough to start. (If the water tower is used in rural areas, the height of the water tower is required to be higher than 10 meters, so that the water pressure reaches the starting value) 6. The display shows E1 over temperature, E4/E5 or temperature sensor failure, first turn off the power, run the machine with cold water, and then use it when it is powered on. Note that the water flow should not be too small in normal use. 7. The heating tube failure displays E2, and the heating tube needs to be replaced. Package List 1 x Water Heater 4 x Screw 4 x Expansion Tube 1 x Manual 1 x Remote Control (Battery Not Included)

    Fruugo United Kingdom

  2. FLIR TG165-X MSX Thermal Camera

    The FLIR TG165-X MSX Thermal Camera is a handheld device from the well-known brand Flir, known for its high-quality thermal imaging technology. With a thermal sensitivity of 70 mK, this camera provides detailed and accurate temperature readings. Its laser infrared thermometer allows for precise measurements within a wide temperature range, making it a versatile tool for various applications such as building inspections, electrical troubleshooting, and search and rescue. Its compact and portable design makes it easy to use in a wide range of settings, providing valuable insights and protection in demanding environments.

    eBay

  3. Side Brush Motor Module for iRobot Roomba 500 600 700 800 900 I3 Serie Robot Vacuum Cleaner Replacem

    New Upgraded side brush motor module design improves performance. Helps keep hair and debris out of the side brush motor module. Used to replace your old side brush motor module. Better design with a better brush and screw. Fit for iRobot Roomba 500 600 700 800 900 series Roomba 694 614 692 690 670 500 600 530 560 620 650 655 760 770 780 690 805 860 861 864 890 880 885 870 871 800 980 960 964 970 980 i7 i7+/plus i3 i3+ i4 i6 i6+ i8 i8+ E5 E6 E7 etc Colour:Blue Material:Plastic Package Contents: 1 x Motor 1 x Screwdriver 1 x Side brush Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

    Fruugo United Kingdom

  4. FLIR ONE Gen 3 Thermal Camera for iOS Smartphones

    Barely used, a novelty purchase. Sold my lighting equipped phone now so no longer useable

    eBay

  5. For Xiaomi Roborock S5 S5 Max S6 S6 MaxV S6 Pure E4 E5 Robot Vacuum Spare Parts Main Side Brush Hepa As Shown

    Brand new and high quality. Made of high-quality materials, more durable. Exquisite and exquisite, highly matched with the old equipment. It is best to replace spare parts every 2 to 3 months to keep the machine at its best performance. The vacuum cleaner accessories are of high quality. It is made of high-strength and environmentally friendly materials. The accessory parts are sturdy and durable with long service life, easy to in. Type: Vacuum Cleaner Parts Vacuum Part Type: Filters Vacuum part type: brush Applicable Models -for Roborock E4 E5 S5 S5 Max S6 S6 Pure S6 MaxV S50 S51 S52 S55 S502-00 S502-02 Material: plastic colour: As shown Package Contents: 2 x roller brush 4 x side brush 4 x hepa filter 4 x mop pads 2 x clean brush Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

    Fruugo United Kingdom

  6. Flir One Thermal Imaging Camera Lightning for iOS, iPhones - White

    Flir One Thermal Imaging Camera Lightning Gen 3 Used in very good condition. Working Comes with non original usb c charging cable A new replacement battery has been fitted

    eBay

  7. 8Pcs Replacement Hepa Filter for Xiaomi Roborock S5 S50 S51 S55 S6 S6 MAXV S5 MAX T6 T7 S4 Max S4 E5 as shown

    Compatibility: Replacement HEPA Filter Compatible with for Xiao-mi Roborock S5 S50 S51 S55 S6 S6 MAXV S5 MAX T6 T7 S4 Max S4 E5 E4 E20 E25 E35 C10. Function: Filters can maintain the cleaning performance of the sweeper and reduce dust intrusion. Easy to clean: The HEPA filters are easy to change and clean, can be changed quickly and easily without tools. Just rinse with clear water and it can be completely dry before use. Note: To keep your robot vacuum running at peak performance, please clean the filter once a week. It is recommended to replace spare parts every 2 to 3 months (depending on frequency of use) to keep the device running as well as possible. Cleaning the filters: 1. Remove the vacuum canister and then push and lift the filter door. Remove the filter by grasping the yellow tab. 2. Shake off dirt by tapping the filter against your trash can. Type: Filter Colour: as shown Material: Plastic Package Contents: 8 * Vacuum filter Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

    Fruugo United Kingdom

  8. Flir (TG267) Thermal Camera with Bluetooth - Black

    In good condition with case. Our Products.

    eBay

  9. Side Brush Motor Module For Irobot Roomba E6 E5 I7 500 600 700 Series_

    new and high quality. Made of high quality material, more durable. The new design of the improved motors improves performance. Helps keep hair and debris out of the brush motor. Used to replace your old side brush module. Better Design.Specification: Fit for Irobot Romberba 500 600 700 800 900 Roomba 500 600 530 560 620 650 655 760 770 780 690 805 860 861 864 890 880 885 870 871 8090 970 870 880 885 870 871 8090 970 etc Package Content: 1*Side Brush 1*Motor Module Only the above package content, other products are not included. The measurement allowed error is +/- 1-3cm.Products from GuanGuan's store

    Fruugo United Kingdom

  10. Flir TG267 Thermal Imaging Camera. Brand New

    eBay

  11. 12-Pack Replacement Filters with iRobot Roomba i&e i1 i3 i4 i6 i7 i8 e5 e6+ J7 (Not for J7+) Vacuum Cleaner Replacement Parts Accessories

    Package includes 12 filters ideal replacement for your old oneCompatible with Roomba i&th series i &e i1 i3 i4 i6 i7 i8 e5 e6 + J7 (No for J7+)!!!Filters maintain vacuum cleaners' cleaning performance, reducing infiltration into your breathReplace accessories regularly to keep your robot vacuum operating at peak performance and maintain a cleaner home environment.All spare parts we sell are replacement products, they are not original spare parts

    Fruugo United Kingdom

  12. FLIR One Gen 3 Thermal Imaging Camera for Android Smartphones USB-C

    The FLIR One Gen 3 Thermal Imaging Camera is a portable and compact accessory designed for Android smartphones with USB-C connectivity. With a display resolution of 80 x 60 pixels, this camera allows you to see the world in a new perspective by detecting heat signatures and displaying them in real-time. The temperature range of 4°F to 248°F makes it ideal for various applications, while the lightweight design and small size make it easy to carry around. Perfect for DIY projects, wildlife spotting, or any other situation where thermal imaging can be helpful. This item has been used one.

    eBay

  13. Roller Brushes for IRobot Roomba I&E&J Series E5 E6 I1 I1+ I7 I7+ I6 I6+ I3 I3+ I4 I4+ I8 I8 J5 J5+ As Shown

    100% brand new and high quality Made of high-quality materials, more durable Uniquely designed brushes with rubber treads to adapt to different floor surfaces that remove everything from small dust to large deposits. As part of normal maintenance, it can be easily removed and replaced It is best to replace spare parts every 2 to 3 months to keep the machine running at its best performance Colour:As Shown Material:plastic Package Contents: 5 pair x roller brush Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

    Fruugo United Kingdom

  14. FLIR One Edge Pro Thermal Camera for Android and iOS

    New with tatty packaging box The FLIR One Edge Pro Thermal Camera is a high-quality imaging accessory designed for use with both iOS and Android devices. Made by the trusted brand Flir, this thermal camera is perfect for capturing detailed thermal images for business, industrial, and inspection purposes. Manufactured in Estonia, this device ensures top-notch quality and performance for users looking to enhance their thermal imaging capabilities on the go.

    eBay

  15. Oval Head Service Repair Tool Key Screws Works for Jura Coffee Machine, Made of Stainless Steel, Extra Long silver 61x6mm

    Description: - Made of Marine Grade 316 Stainless Steel, durable, tough and corrosion resistant. - A special bit key to remove the screws on the back wall of coffee machines. - Fit for Jura / Krups / Franke / AEG / Orchestro / Siciliana / Toscana machines. - The key ring moves freely and immediately applicable or can easily be removed so that you can use a regular driver handle for access in the tightest places. - Please beware that the tool does not fit the 5.8x4.8mm oval head bolts of drip coffee makers. Specification: - Material: 316 Stainless Steel - Key Length: Approx. 61mm / 2.4inch - Key Width(Max*Min): Approx. 7*6mm / 0.28*0.24inch - Color: Silver - The bit will fit the proprietary oval head security screws in the following machines: - For Jura: A1, A5, A7, A9, C5, C50, C55, C65, C70, C75, C9, C90, D6, E5, E8, E9, E10, E25, E30, E40, E45, E50, E55, E6, E60, E65, E70, E74, E75, E80, E85, ENA3, ENA4, ENA5, ENA7, ENA9, ENA Micro 1, ENA Micro 5, ENA Micro 8, ENA Micro 9, ENA Micro 90, ENA Micro Easy, F5, F50, F60, F70, F90, F7, F9, F900, Giga 5, Giga X3, Giga X7, Giga X8, Giga X9, XF50, XF70, S50, S55, S70, S75, S85, S90, S95, S7, S8, S9, J5, J6, J9, Z5*, Z6*, Z7*, Z8*, Z9*, X5*, X6*, X7, X9, X30, X70, X90, X95, , Cappuccinatore, M30, Scala, Scala Vario, , 201, 300, 401, 500, 601, 801, 2000, 3000, 4000, 5000, 6000 Package Includes: 1 Piece Coffee Machine Repair Tool Key 6 Pieces Rubber Gasket Note: Please allow a slight difference between the size above and the actual item due to manual measurement.

    Fruugo United Kingdom

  16. FLIR C3-X Compact Thermal Camera

    Accuracy: 0 to 100°C (32 to 212°F): ±3°C (±5.5°F); 100 to 300°C (212 to 572°F): ±3% [ambient temp. 15 to 35°C (59 to 95°F) and object temp. above 0°C (32°F)]. Thermal Sensitivity/NETD: <70 mK. Image Modes: Infrared image, Visual image, MSX (Embossed visual details on thermal image), Picture-in-picture (IR area on visual image).

    eBay

  1. Previous Page (Page 4)Next Page (Page 6)