The Neomounts by Newstar ceiling mount, model FPMA HAC100HC is a tilt and swivel ceiling mount for medical flat screens up to 32 quot;. This mount is a great choice for space saving placement or when wall mounting and floor placement is not an option. Neomounts by Newstar 39;s versatile tilt (55 ) and swivel (370 ) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the flat screen. The support is easily height adjustable from 0 to 170 centimetres using a gas spring. Depth adjustable from 0 to 170 centimetres. An innovative cable management conceals and routes cables from mount to flat screen. Hide your cables to keep the workplace nice and tidy. Neomounts by Newstar FPMA HAC100HC has two pivot points and is suitable for screens up to 32 quot; (81 cm). The weight capacity of this product is 12 kg each screen. The ceiling mount is suitable for screens that meetVESA hole pattern 75x75 or 100x100mm. Different hole patterns can be covered using Neomounts by Newstar VESA adapter plates. All installation material is included with the product.
AV Parts Master
The Neomounts ceiling mount, model FPMA C050SILVER is a tilt and swivel ceiling mount for flat screens up to 30 quot;. This mount is a great choice for space saving placement or when wall mounting and floor placement is not an option. Neomounts versatile tilt (40 ) and swivel (180 ) technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the flat screen. The support is easily height adjustable from 50 to 85 centimetres. An innovative cable management conceals and routes cables from ceiling to TV. Hide your cables in the column to keep it nice and tidy. Neomounts FPMA C050SILVER has two pivot points and is suitable for screens up to 30 quot; (76 cm). The weight capacity of this product is 20 kg. The ceiling mount is suitable for screens that meetVESA hole pattern 50x50 or 100x100mm. Different hole patterns can be covered using Neomounts VESA adapter plates. All installation material is included with the product.
AV Parts Master
The Neomounts floor stand, model PLASMA M2000 is a mobile floor stand for flat screens up to 85 quot; (216 cm). This mobile stand is a great choice for space saving placement or when wall , ceiling mounting or desk placement is not an option. This cart stretches your investment by serving a variety of projection needs by sharing a large display over multiple rooms. Get optimal positioning for both standing and seated audiences, in any application, in any part of your location. Neomounts versatile tilt (15 ) and rotate (180 )technology allows the mount to change to any viewing angle to fully benefit from the capabilities of the flat screen. You can easily rotate the screen from portrait to landscape and back. The mount is manually height adjustable from 140 to 180 centimetres. An innovative cable management conceals and routes cables from mount to flat screen. Hide your cables to keep the stand nice and tidy. Neomounts 39; floor stand, PLASMA M2000 holds your TV, AV equipment and even hides your cables. The trolley features four solid castor wheels, of which the two front wheels are equipped with a brake. The casters allow the stand to move it to where you need it. Easily roll this cart through doorways and over thresholds. Neomounts PLASMA M2000 has one pivot point and is suitable for screens up to 85 quot; (216 cm). The weight capacity of this product is 100 kg each screen. The stand is suitable for screens that meet VESA hole pattern 200x200 to 800x400mm. Different hole patterns can be covered using Neomounts VESA adapter plates. Speedy assembly and installation. All installation material is included with the product.
AV Parts Master
The Neomounts CPU M100BLACK is a portable CPU holder for your computer tower. A CPU mount creates a tidy and clean desk because its stored under the desk and doesn't use any valuable desk space. Increase the lifetime of your CPU due to reduction intake dust and dirt from floors. Keep the workplace clean without computers directly placed on the floor. This Neomounts CPU mount allows vertical installation of computers. Easy to adjust to fit most desktops and tower PCs with a width between 12 cm and 21 cm. Model CPU M100BLACK has 4 casters of which two are lockable. All installation material is included with the product.
AV Parts Master
RA Studfix V1 NM (Nursery School Model with lower screen height positions) A complete Floor to Wall Mounting System suitable for Flat Screens with a maximum recommended weight of 65kg and maximum VESA mount configuration of 600x400, designed for use in Nursery and Primary School environments where a lower screen position is required. This Nursery Model allows the bottom of an average sized 65 inch screen to be positioned approximately 25cm from Floor Level. A complete installation solution designed to enable Flat Screens or Touch Screens to be fixed to a wooden stud partition wall or solid wall and direct the weight of the screen directly to the floor. Ideal for installations when the wall itself cannot support the weight of a heavy screen. Suitable for Smart, Clevertouch, Ctouch, Promethean ATP, Philips, Samsung, LG, Panasonic, BENQ, iTouch, Vividtouch, Hitachi, Iiyama, iBoard, Genee Screens and many more................ The system includes two upright supporting box section legs which are fixed to the existing upright wooden studs inside the wall with a Wall Mounting Plate and Floor Plate included in the kit. This creates a rigid, safe and strong fixed mounting frame for the Flat Screen Mount (included) to fix onto and position the screen at a selection of height settings. All fixings, bolts, coach screws and plastic caps are included for a very neat and tidy installation. The two Upright Supporting Legs are hollow box section design and allow all connection cables to and from the screen to be routed through them. Cable exit entry slots are positioned on the inner sides of each leg to enable surface mounted cable trunking to route cables away to a connection panel if required (not included). Maximum CENTRE POINT of screen from floor level is approximately 1060mm. Minimum CENTRE POINT of screen from floor level is approximately 760mm. The Wall Mounting Plate can be fixed to the wall in a LOWER or HIGHER position to avoid any dado rails or network trunking on the walls surface. In the LOWEST position the centre of the plate will be 650mm from floor level and in the HIGHEST position the plate will be 980mm from floor level. The Wall Mounting Plate itself is 120mm high and has four mounting slots 400mm apart. Upright supporting legs are 500mm apart (centre to centre). Finished in durable White or Black powder coat finish. An Optional Extra Media Shelf is available for this system (RA Studfix Shelf) which can be positioned under the screen at a selection of height settings.
AV Parts Master
Peerless AV s Universal Portrait Projector Mount is the perfect mounting solution for holding a projector in multiple orientations. Whether the projector is needed in portrait orientation for digital signage, or positioned toward the floor in an interactive exhibit in a museum, the PJR125 POR EUK provides mounting flexibility. The tilt, roll and swivel features are all lockable to prevent even the smallest shift of the image. Six universal legs provide additional support for projectors with more than four mounting holes and are completely adjustable. The Hook and HangTM feature provides a large landing area when securing a projector to the mount and takes the weight off the installer while they are making adjustments.
AV Parts Master
RA Studfix V2 NM (Nursery School Model with lower screen height positions) A complete Floor to Wall Mounting System suitable for Flat Screens with a maximum recommended weight of 80kg and maximum VESA configuration of 800x600. Designed for use in Nursery and Primary School environments where a lower screen position is required. This Nursery Model allows the bottom of an average sized 65 inch screen to be positioned approximately 25cm from Floor Level. A complete installation solution designed to enable Flat Screens or Touch Screens to be fixed to a wooden stud partition wall or solid wall and direct the weight of the screen directly to the floor. Ideal for installations when the wall itself cannot support the weight of a heavy screen. Suitable for Smart, Clevertouch, Ctouch, Promethean ATP, Philips, Samsung, LG, Panasonic, BENQ, iTouch, Vividtouch, Hitachi, Iiyama, iBoard, Genee Screens and many more................ The system includes two upright supporting box section legs which are fixed to the existing upright wooden studs inside the wall with a Wall Mounting Plate and Floor Plate included in the kit. This creates a rigid, safe and strong fixed mounting frame for the Flat Screen Mount (included) to fix onto and position the screen at a selection of height settings. All fixings, bolts, coach screws and plastic caps are included for a very neat and tidy installation. The two Upright Supporting Legs are hollow box section design and allow all connection cables to and from the screen to be routed through them. Cable exit entry slots are positioned on the inner sides of each leg to enable surface mounted cable trunking to route cables away to a connection panel if required (not included). Maximum CENTRE POINT of screen from floor level is approximately 1060mm. Minimum CENTRE POINT of screen from floor level is approximately 760mm. The Wall Mounting Plate can be fixed to the wall in a LOWER or HIGHER position to avoid any dado rails or network trunking on the walls surface. In the LOWEST position the centre of the plate will be 650mm from floor level and in the HIGHEST position the plate will be 980mm from floor level. The Wall Mounting Plate itself is 120mm high and has four mounting slots 400mm apart. Upright supporting legs are 500mm apart (centre to centre). Finished in durable White or Black powder coat finish. An Optional Extra Media Shelf is available for this system (RA Studfix Shelf) which can be positioned under the screen at a selection of height settings.
AV Parts Master
With the Neomounts by Newstar PLASMA W2500SILVER automatic height adjustable floor stand you place a large format flat screen on the floor and anchor it to the wall with the included wall mounts (7 cm distance). Get optimal positioning for both standing and seated audiences, in any application, in any part of your location. Perfect to use in a class room, boardroom, presentation room or public entrance. The PLASMA W2500SILVER is suited for screens between 42 quot; 100 quot; and has a load capacity of 150 kg. The mount is suitable for screens with a VESA hole pattern of 200x200 to 800x600 mm. The mobile electric floor lift is automatically height adjustable over a height of 50 cm with a remote control. From the floor to the center the distance of the screen is variable from 119 169 cm. The position can be perfectly leveled with four adjustable feet under the central column. Behind the screen is a 6 cm deep space available to mount a media player or mini computer. Cables can be guided at the back of the mount. The Neomounts by Newstar PLASMA W2500SILVER comes in a RAL 9006 color and all installation material is included with the product. Warranty: 5 year.
AV Parts Master