GNSS Antenna: Use in conjunction with the A2 External Magnetic Roof Mount GNSS Antenna to achieve +/- 80cm accuracy.Dual frequency: Built-in L1-L5 dual-frequency positioning module, positioning is faster, more accurate and more reliable.Application: Based on the Android system, it works with the pre-installed Field Bee/Field Navigator application.Installation: Easily set up your unit with the durable tractor mount Always connected with built-in WiFi Always in sync with your software over-the-air updates.Operation: LED power button, easy-to-use shortcut keys, two-finger zoom.
Fruugo United Kingdom
Fit to the device models:Icom IC-H2, IC-H6, IC-H12, IC-H16, IC-U2, IC-U12, IC-U16, IC-M2, IC-M5, IC-M11, IC-M12, IC-2AT, IC-2GAT, IC-3AT, IC-3GAT, IC-4AT, IC-4GAT, IC-12AT, IC-12GAT, IC-32A, IC-32AT, IC-32E, IC-A20, IC-A21, IC-A2.
eBay
= - Using our agricultural tractor GPS navigator which is equipped with cutting-edge GNSS Antenna to unlock unprecedented accuracy and efficiency in your agricultural operations Paired seamlessly with the A2 External Magnetic Roof Mount, achieve an impressive +/- 50cm accuracy, ensuring pinpoint precision in AB line. NOTE: The device needs to be connected to either a cell phone hotspot or a personal mobile network - Equipped with a state-of-the-art L1-L5 dual-frequency positioning module, our tractor navigator ensures lightning-fast and reliable positioning whether you're harvesting, sowing, trenching, cultivating, ridging, transplanting or land consolidation, our navigator delivers the accuracy and consistency you need to minimize wastage - Designed to seamlessly integrate with the Android-based Field Bee/Field Navigator application, our tractor GPS simplifies route planning and navigation. Effortlessly preset and navigate your A-B line with just a few taps on the LED touch screen, saving you valuable time and effort - After connected to a WiFi Hotspot, it will seamless over-the-air updates to keep your software up to date for optimal performance. Whether you're in the field or on the move, our navigator keeps you connected and informed - Enjoy hassle-free installation, the bottom of the antenna is equipped with magnets, simply attach it to the top of the trailer. A monitor bracket is included for securing it to the cab. Then use the included connecting cable to connect the two, the whole process is effortless. It is compatible with a wide range of tractor models including CAT, MT3, CASE, CLAAS, JCB, DEUTZ, JOHN-DEERE, MTZ, as well as plant protection equipment, rice transplanters...
Fruugo United Kingdom
Fit to the device models:Icom IC-H2, IC-H6, IC-H12, IC-H16, IC-U2, IC-U12, IC-U16, IC-M2, IC-M5, IC-M11, IC-M12, IC-2AT, IC-2GAT, IC-3AT, IC-3GAT, IC-4AT, IC-4GAT, IC-12AT, IC-12GAT, IC-32A, IC-32AT, IC-32E, IC-A20, IC-A21, IC-A2.
eBay
About this item = - Using our agricultural tractor GPS navigator which is equipped with cutting-edge GNSS Antenna to unlock unprecedented accuracy and efficiency in your agricultural operations Paired seamlessly with the A2 External Magnetic Roof Mount, achieve an impressive +/- 50cm accuracy, ensuring pinpoint precision in AB line. NOTE: The device needs to be connected to either a cell phone hotspot or a personal mobile network - Equipped with a state-of-the-art L1-L5 dual-frequency positioning module, our tractor navigator ensures lightning-fast and reliable positioning whether you're harvesting, sowing, trenching, cultivating, ridging, transplanting or land consolidation, our navigator delivers the accuracy and consistency you need to minimize wastage - Designed to seamlessly integrate with the Android-based Field Bee/Field Navigator application, our tractor GPS simplifies route planning and navigation. Effortlessly preset and navigate your A-B line with just a few taps on the LED touch screen, saving you valuable time and effort - After connected to a WiFi Hotspot, it will seamless over-the-air updates to keep your software up to date for optimal performance. Whether you're in the field or on the move, our navigator keeps you connected and informed - Enjoy hassle-free installation, the bottom of the antenna is equipped with magnets, simply attach it to the top of the trailer. A monitor bracket is included for securing it to the cab. Then use the included connecting cable to connect the two, the whole process is effortless. It is compatible with a wide range of tractor models including CAT, MT3, CASE, CLAAS, JCB, DEUTZ, JOHN-DEERE, MTZ, as well as plant protection equipment, rice transplanters... See more product details Report an issue with this product or seller Note: Products with electrical plugs are designed for use in the US. Outlets and voltage differ internationally and this product may require an adapter or converter for use in your destination. Please check compatibility before purchasing.
Fruugo United Kingdom
Fit to the device models:Icom IC-H2, IC-H6, IC-H12, IC-H16, IC-U2, IC-U12, IC-U16, IC-M2, IC-M5, IC-M11, IC-M12, IC-2AT, IC-2GAT, IC-3AT, IC-3GAT, IC-4AT, IC-4GAT, IC-12AT, IC-12GAT, IC-32A, IC-32AT, IC-32E, IC-A20, IC-A21, IC-A2.
eBay
For BMW series single module programming or modules hiding ENET data line. Fitment:For BMW F series , the new 1 Series, 3 Series, 5 Series, 7 Series , GT, X3. Installation guide not included, we strongly recommend you seek professional installation. Product Features: One can hide modules or program single module 1. Lock unlock sound confirmation (to prevent radio interference, add sound to confirm car locked when turn light confirmation inconvenient. This is setup in cic) 2. Can operate the navigation menu including watching dvd when driving(for driving safety. Let the side driver operate the navigation menu) 3. Display engine output and torque meter (purely fun, look engine output) 4. Cancel confirmation screen big screen boot delay 5. Open the voice recognition function 6. Three kind of bluetooth phone ringtones (personality only) 7. Increasing the cic memory address to 50 8. The glass automatically rise to the top process is not terminated by the car door (easy to get off to close the window waiting) 9. The digital speed display (fun only) 10. Air-conditioned memory of the last off state (without air conditioning season is more convenient) 11. Indoor cycling memories of the last time the state when engine off Note: Please check as much as possible to make sure the item is what you need. Tips:The product may be updated constantly ,Due To Different Batches, The Actual Product May Have Slight Differences Or Color Differences, Which Does Not Affect Use. Colour:Red Material:Plastic Package Contents: 1 x Cable For BMW ENET (Ethernet to OBD) Interface Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
Fit to the device models:Icom IC-H2, IC-H6, IC-H12, IC-H16, IC-U2, IC-U12, IC-U16, IC-M2, IC-M5, IC-M11, IC-M12, IC-2AT, IC-2GAT, IC-3AT, IC-3GAT, IC-4AT, IC-4GAT, IC-12AT, IC-12GAT, IC-32A, IC-32AT, IC-32E, IC-A20, IC-A21, IC-A2.
eBay
Specification:Type: light curing composite resinShage: A1 A2 A3Net weight: 2.5gColor: as picture showQuantity:1pcsFeatures:1. Low polymerization shrinkage.2. High strength and polishability.3. Similar modulus of elasticity with dentine.4. Radioopaque and fluoride releasing Optimal polishability and high shade stability.5. Easy to mold.6. Easy to adhere to bracket for orthodontics.7. Simple and convenient to use.8. Used for all types of cavity preparations. Usage:1. Prepare cavities according to conventional requirements, remove decayed tissue, and clean cavities.2. Apply dental composite resin pre-treatment agent (etchant) to the tooth surface to be bonded, rinse and blow dry the bonding surface.3. Apply a uniform and thin layer of dental composite resin pre-treatment agent (adhesive) on the bonding surface, and illuminate with a dental light curing lamp for 20 seconds.4. After filling and carving with an appropriate amount of composite resin, the light intensity should not be less than 400mW/cm The light source is irradiated for 20 seconds to solidify. Curing depth 1.5mm. If the filling depth is large, the irradiation time can be appropriately extended or layered solidification filling can be carried out.5. Conduct trimming and polishing, and inspect with dental bite paper before trimming. It is recommended to use rubber polishing wheels and ultra-fine abrasive polishing strips.6. Recommended use of pulp protection and cushioning materials: calcium hydroxide (light cured or chemically cured) or other non oily cushioning materials. Do not use materials containing eugenol directly as a base.Scope of application: Non occlusal cavity filling repair.Attention: Close the lid immediately after use to avoid exposure to light.Contraindications: For pulpitis, use with caution. When penetrating the pulp or near the pulp chamber, it is necessary to perform pulp capping and pulp protection surgery before filling with resin. Other pulp diseases should be treated before filling.Storage conditions: Store at room temperature and avoid direct sunlight.
Fruugo United Kingdom
(• Compatible Icom Models ICOM IC-F5010 IC-F5011 IC-F5021 IC-F5023 Radio. We are not responsible for providing programming software for any radio model and you should by yourself if you don't in this CD.).
eBay
Specification:Type: light curing composite resinShage: A1 A2 A3Net weight: 2.5gColor: as picture showQuantity:1pcsFeatures:1. Low polymerization shrinkage.2. High strength and polishability.3. Similar modulus of elasticity with dentine.4. Radioopaque and fluoride releasing Optimal polishability and high shade stability.5. Easy to mold.6. Easy to adhere to bracket for orthodontics.7. Simple and convenient to use.8. Used for all types of cavity preparations. Usage:1. Prepare cavities according to conventional requirements, remove decayed tissue, and clean cavities.2. Apply dental composite resin pre-treatment agent (etchant) to the tooth surface to be bonded, rinse and blow dry the bonding surface.3. Apply a uniform and thin layer of dental composite resin pre-treatment agent (adhesive) on the bonding surface, and illuminate with a dental light curing lamp for 20 seconds.4. After filling and carving with an appropriate amount of composite resin, the light intensity should not be less than 400mW/cm The light source is irradiated for 20 seconds to solidify. Curing depth 1.5mm. If the filling depth is large, the irradiation time can be appropriately extended or layered solidification filling can be carried out.5. Conduct trimming and polishing, and inspect with dental bite paper before trimming. It is recommended to use rubber polishing wheels and ultra-fine abrasive polishing strips.6. Recommended use of pulp protection and cushioning materials: calcium hydroxide (light cured or chemically cured) or other non oily cushioning materials. Do not use materials containing eugenol directly as a base.Scope of application: Non occlusal cavity filling repair.Attention: Close the lid immediately after use to avoid exposure to light.Contraindications: For pulpitis, use with caution. When penetrating the pulp or near the pulp chamber, it is necessary to perform pulp capping and pulp protection surgery before filling with resin. Other pulp diseases should be treated before filling.Storage conditions: Store at room temperature and avoid direct sunlight.
Fruugo United Kingdom
Battery type: NiMH Capacity: 1800 mAh Voltage: 8.4 V Energy: 15.12 Wh Colour of rear cap: black Number of cells: 7 Weight: 218 g Including back cover Compatible with the following device models: Icom IC-H6 Icom IC-H2 Icom IC-H16 Icom IC-H12 Icom IC-A21 Icom IC-A20 Icom IC-A2 Icom IC-4GAT To ensure compatibility, please check to see whether the battery you are currently using is listed below.
eBay
Specification:Type: light curing composite resinShage: A1 A2 A3Net weight: 2.5gColor: as picture showQuantity:1pcsFeatures:1. Low polymerization shrinkage.2. High strength and polishability.3. Similar modulus of elasticity with dentine.4. Radioopaque and fluoride releasing Optimal polishability and high shade stability.5. Easy to mold.6. Easy to adhere to bracket for orthodontics.7. Simple and convenient to use.8. Used for all types of cavity preparations. Usage:1. Prepare cavities according to conventional requirements, remove decayed tissue, and clean cavities.2. Apply dental composite resin pre-treatment agent (etchant) to the tooth surface to be bonded, rinse and blow dry the bonding surface.3. Apply a uniform and thin layer of dental composite resin pre-treatment agent (adhesive) on the bonding surface, and illuminate with a dental light curing lamp for 20 seconds.4. After filling and carving with an appropriate amount of composite resin, the light intensity should not be less than 400mW/cm The light source is irradiated for 20 seconds to solidify. Curing depth 1.5mm. If the filling depth is large, the irradiation time can be appropriately extended or layered solidification filling can be carried out.5. Conduct trimming and polishing, and inspect with dental bite paper before trimming. It is recommended to use rubber polishing wheels and ultra-fine abrasive polishing strips.6. Recommended use of pulp protection and cushioning materials: calcium hydroxide (light cured or chemically cured) or other non oily cushioning materials. Do not use materials containing eugenol directly as a base.Scope of application: Non occlusal cavity filling repair.Attention: Close the lid immediately after use to avoid exposure to light.Contraindications: For pulpitis, use with caution. When penetrating the pulp or near the pulp chamber, it is necessary to perform pulp capping and pulp protection surgery before filling with resin. Other pulp diseases should be treated before filling.Storage conditions: Store at room temperature and avoid direct sunlight.
Fruugo United Kingdom
Fit to the device models:Icom 02AT, 03AT, 04AT, 12AT, 2A, 2AT, 2GAT, 32A, 32AT, 32E, 3AT, 4AT, 4GAT, H/U12, H/U16, H/U2, H6, HTX-202, HTX-404, IC-02GAT, IC-12AT, IC-12GAT, IC-2AT, IC-2GAT, IC-32A, IC-32AT, IC-32E, IC-3AT, IC-3GAT, IC-4AT, IC-4GAT, IC-A2, IC-A20, IC-A21, IC-H12, IC-H16, IC-H16T, IC-H2, IC-H6, IC-M11, IC-M12, IC-M2, IC-M5, IC-U12, IC-U16, IC-U16T, IC-U2, M12, M2, M5.
eBay
New and high quality. Made of high-quality materials for maximum durability and reliability. Seamless fit, for your . Easy to install, no complicated tools required, easy to use. Professional workmanship, exquisite , novel and unique style ENET Date cable for F-series ICOM Coding OBD2 Interface Cable For OBDII Scanner Data Tool Colour:red Material:plastic Note: Without CD, Installation guide not included, we strongly recommend you professional installation. Please check as much as possible to make sure the item is what you need. Due to different batches, there may be differences in product appearance and printed text, which not affect use Package Contents: 1 * ENET Cable Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
Fit to the device models:Icom 02AT, 03AT, 04AT. Compatible with the battery part numbers:BP-7, BP-7H, CM-7.
eBay