[Material]With carbide materials,edge grinding wheel with ultrafine polishing, ultra-hardness, super toughness,and more wear edge .Compatible with for CB09 Graphtec Cutting Blade Holder. [Blade]30 blades are predominantly used for cutting very thin window and mylar materials such as fabric, thin cardboard and leather;45 degree blade used for most cuts such as standard cast and calendered vinyls; 60 degree blade used for the most intricate and delicate cuts or thicker materials. [Replacement]All blades must be adjusted manually,and the silhouette blades replacement do not automatically adjust in the silhouette for depth needed to cut. [Application]The hard alloy cutter blades are with fine polishing process, and for long-time cutting,suitable for PVC color board,mahogany,wood,MDF and other precision relief. Colour:yellow+red+blue Material:Tungsten steel Size:13.1 x 10.1 x 2.6 cm Package Contents: 10 * 30 degree Cutter Blade 10 * 45 degree Cutter Blade 10 * 60 degree Cutter Blade 1 * Blade holder 30 * Mini Spring Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
DC 9-42V power supply, 12-30V power supply is the best The control signal input voltage is 3.3-24V universal (no string resistance required) Subdivision accuracy 1-32 subdivision optional Output current 4.0A H-bridge bipolar constant current drive The upgraded version of TB6600 is a driver suitable for 57/42 type two-phase hybrid stepping motor with phase current below 4.0A. Set 7 kinds of subdivisions (1/2A/2B/4/8/16/32) through 6-bit DIP switch And 8 gear output current (0.5A/1.0A/1.5A/2.0A/2.5A/2.8A/3.0A/3.5A) Widely used in various small and medium-sized automation equipment and hardware, Such as: engraving machine, marking machine, cutting machine, laser phototypesetting, plotter, CNC machine tool, crystal grinding machine, automatic assembly equipment, etc. The best application object is 57 stepper motors and 42 stepper motors with a torque of 1.8N.m and below. 1. Input signal high-speed optocoupler isolation 2. Built-in temperature protection and overcurrent protection 3. Automatic half flow to reduce heat generation 4. Motor noise optimization function Tips:The product may be updated constantly ,Due To Different Batches, The Actual Product May Have Slight Differences Or Color Differences, Which Does Not Affect Use. Colour:As Shown Material:ABS Package Contents: 1 * Stepper Motor Driver Kit Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
Precise Specifications: This set includes four pinch rollers with precise dimensions of 10mm height, 4mm inner diameter, and 14mm outer diameter, ensuring a perfect fit and operation in your cutting plotter. Wide Compatibility: Specifically designed for Mimaki CG Series, these pinch rollers are compatible with models CG-61, CG130FX, CG160FX, CG60CR, and JV160XP. They are engineered to meet the exact requirements of the specified plotters for optimal performance. Construction: Crafted from premium rubber and copper, these rollers boast high durability and performance. Their robust build guarantees a long service life and resistance to wear, providing reliable and consistent results over extensive usage. Maintenance Tips: Regular cleaning is crucial for maintaining the efficiency of these rollers. They tend to accumulate adhesive from cutting materials, which can affect performance. Cleaning them frequently ensures they continue to provide precise and clean cuts. Optimal Replacement Recommendation: For the best results and to maintain even pressure across your device, it is recommended to replace pinch rollers in pairs. This ensures balanced operation and sustained quality in your projects, enhancing the of your plotter. Colour:Black Material:Rubber+Copper Package Contents: 4x Pinch Roller Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
Type: End Mill High quality and Extra. Blade Size: 21mm (Length) * 1.5mm (Diameter) Overall Length: 23mm Knifepoint Offset: 0.25mm Color: as shown Material: metal Package Contents: 1 * knife holder 5 * 30 carving knife 5 * 45 carving knife 5 * 60 carving knife Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
Features: brand new and high quality for Roland vinyl cutter plotter and etc. Dimension: 3x11x16mm.4x11x16mm.4x10x14mm.4x10x18mm. Easy to install and were of good quality. If you have any questions, comments, or concerns, please contact us and we will correct your issue. Package: 5pcs Pinch Rollers for Vinyl Cutter. Package Includes: 5Pcs x Pinch Rollers Specifications: Material: rubber + copper Size: 3x11x16mm.4x11x16mm.4x10x14mm.4x10x18mm(optional) note: No retail package. Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Fruugo United Kingdom
[Large Stainless Steel Compass]: The sector compass is made of high quality stainless steel and has a considerable length of 20cm, which is sturdy, water repellent, not prone to rust and corrosion, accurate result and good stabilization. The metal tip of this carpenter compass can be engraved and will not slip, which can be used for a long time. It is a good tool for large carpentry, marking, drawing, metal and leather work. [Dry Point Compass with Wing and Pencil Holder]: The precision compass with lockable wing makes it easy to repeat measurements, draw circles, draw arcs, that don't jump or slide out of your control. The wing divider with pencil holder makes it easy to draw circles up to 56 cm in diameter for most materials. This large drawing compass is suitable for professionals. [Easy to adjust and draw]: The wing separator allows you to place the pencil in the pencil holder and fix it, then quickly adjust the desired angle through the wings, central gear and compass leg, get the exact diameter, measure and draw all kinds of circular arcs. With a lockable design, it is a great convenience for adjusting, drawing, duplicating and measuring lengths, arcs and circles. [ Compass tips suitable for engraving ]: Hard tips and sharp points of the dry tip compass allow you to draw lines clearly and easily on surfaces made of imitation leather, wax candle, metal, wood, plastic and other parts. The square section compass feet benefit grip and balance. The dry point compass is also used to make interval marks for drilling holes. [ Dry Point Compass Strong Practicability ]: The dry point compass is widely used for mechanical tracing, artificial leatherwork , DIY arts and crafts, etc. tools and equipment. The carpenter's pencil compass is suitable for drawing circles as requested. The large compass for drawing circles is also the best gift for woodworkers, students, engineers, artists, designers and craft craftsmen. The professional woodworking compass with wing and pencil holder is perfect for carpentry, carpentry, metal work, leather work, DIY, math, etc. Specification: Color: Silver Quantity: 1Pc Material: Stainless Steel Package weight: 0.19kg Package size: 20*3.5 *1.5cm Features: Adjustable Measuring Compass: The wing splitter tool with adjustment screw is convenient to correct and lock the compass. The professional compass can adjust the width between the flat feet, making it easier to use. Pencil holder suitable for normal-sized pencils: The pencil holder of the steel compass has a diameter of 8 mm, which is weld strength and will not break. Unique Design: Made of stainless steel, this Fender Divider Compass features square section legs for grip and balance. The wing divider scribe highlights a non-slip compass tip and a screw that can be turned to lock. Be suitable for: Woodworking; Metalworking; Leather working; Measuring diameters; Drawing or tracing circles and arcs; Use as a divider to measure diameters. Warm Tips: 1. Pencil is not included. 2. The carpenter's compass features ground finish and the surface is smooth and shiny; You can coat a layer of anti-rust oil on the pencil compass plotter to prevent rust; 3. There are marks on the surface of the compass, which are anti-rust oil. 4. Due to the difference between different monitors, there may be slight color difference. 5. Due to manual measurement, the size may have a certain error. Package includes: 1 x 20cm Pointed Compass Welcome to meetSold by the grid cool store
Fruugo United Kingdom
Precise Specifications: This set includes four pinch rollers with precise dimensions of 10mm height, 4mm inner diameter, and 14mm outer diameter, ensuring a perfect fit and operation in your cutting plotter. Wide Compatibility: Specifically designed for Mimaki CG Series, these pinch rollers are compatible with models CG-61, CG130FX, CG160FX, CG60CR, and JV160XP. They are engineered to meet the exact requirements of the specified plotters for optimal performance. Construction: Crafted from premium rubber and copper, these rollers boast high durability and performance. Their robust build guarantees a long service life and resistance to wear, providing reliable and consistent results over extensive usage. Maintenance Tips: Regular cleaning is crucial for maintaining the efficiency of these rollers. They tend to accumulate adhesive from cutting materials, which can affect performance. Cleaning them frequently ensures they continue to provide precise and clean cuts. Optimal Replacement Recommendation: For the best results and to maintain even pressure across your device, it is recommended to replace pinch rollers in pairs. This ensures balanced operation and sustained quality in your projects, enhancing the of your plotter. Colour:Black Material:Rubber+Copper Package Contents: 4x Pinch Roller Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
Feature: can heat the nozzle to 300c Highly-recommend for fast speed 3d printers 3d printing accessories: impressora 3d pe as imprimante 3d accessoire: 3D Printer Accessories Name: Thermistor & Ceramic Heater Compatible with: for P1P P1S Please note: the physical slightly color difference or difference, does not affect the use, please do not mind, thank you! Ceramic heaters and hotend thermistors are only used for hot end heating block assemblies. Material: plastic colour: As Shown Package Contents: 1 x heater and themistor Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom