100 pieces of 10 32 X 0.75 rack screws in a black zinc finish. Delivered in a plastic clamshell container.
AV Parts Master
The CMS492C conceals AV equipment above a 2' X 2' ceiling tile and supports a 1.5 NPT column drop for mounting projectors within the same tile grid providing a clean professional look for classrooms and conference rooms. Column not included, must be purchased separately. Optimal pipe flexibility within the tile helps with less reliance on image correction improving image quality Drop carriage door improves accessibility and serviceability providing full access to equipment Detachable power housing can be pre installed with electricians on site and assembled to the storage box at a later time Inside the plenum box or facing the room Up to 2 single gang or 1 dual gang outlet 4 nested knockouts for 1 1 4 , 1 , 1 2 diameter conduit Built in ventilation AV tray supports a variety of AV components Ships with 1 shelf, 2nd shelf sold separately see CMSUNV2 1 RU rack rail brackets sold separately, see CMS1RU Overall weight capacity 100 lbs (45 kg) 50 lbs (22 kg) for projector ceiling plate 25 lbs (11 kg) per shelf location Ships with speed connect installation hardware Lightweight construction, one man installation Plenum rated, UL approved in accordance to 2043 TAA Compliant
AV Parts Master
AT SW 5000ED 4K UHD capability 60 Hz with 4:2:0 chroma subsampling Two HDBaseTTM and three HDMI inputs Mirrored HDBaseT and HDMI outputs Automatic input selection and automatic display control TCP IP, RS 232, and IR control EDID and HDCP management Front panel volume control and indicator PoE (Power over Ethernet) source remotely powers compatible HDBaseT endpoints Reliable Auto Switching The SW 5000ED automatically selects an input source based on detection of the 5 volt hot plug detect (HPD) signal, as well as active video. This ensures reliable auto switching operation for all video sources, including DVRs, DisplayPort Mini DisplayPort adapters, and other devices that always maintain the HPD line at the 5 volt high state but may not be delivering active video. Mirrored HDMI and HDBaseT Outputs The SW 5000ED adds 4K UHD performance and extended distance HDBaseT transmission to Atlona s HDMI small switcher family for a unique solution for professional integration applications. Internal HDBaseT and video distribution eliminate the need for additional system components while PoE eliminates the need for a power supply for the receiver. As an alternative, with an HDBaseT capable display, an HDBaseT receiver isn t required, reducing system complexity and saving integrators time and money. Additional Features Advanced features also include a web based GUI for easy set up and management of EDID, HDCP, and display control. The switcher offers audio de embedding of PCM audio over HDMI to two channel, balanced 4 dBu analog audio outputs. The switcher is a cost effective product for professional integration featuring a compact, 1U, half rack width enclosure that is easily installed with included 19 rack mount brackets. Two units can be mounted side by side.
AV Parts Master
3U, 14 deep vented utility shelves holds non rack mount equipment and provides ventilation to components. 50 lb. weight capacity.
AV Parts Master
The AV 1900 is a highly capable mixer amplifier packed with useful features to make it as easy as possible to operate. It is designed for use in demanding applications like meeting spaces, small auditoriums, lecture theatres, school halls, and small churches. It has professional audio features normally only found in much more expensive mixer amps. Bluetooth For ease of connectivity it has a Bluetooth input. The device name and pin are fixed and cannot be changed. It can only pair with one device at a time. A device can be manually unpaired by pressing the INPUT 3 dial. If you do not want Bluetooth active just set input 3 to mic input with the switch on the rear. Mixer Amp This amp has four inputs, each of which can either be used for a microphone or a line level input. It is a true mixer amp, so it can bring together multiple sources and play them at the same time. Mic Pre Amp Trim The input gain for each mic input can be trimmed adjusted on the rear panel. This allows the installer to turn up less sensitive mics, and turn down hot inputs. Switchable Phantom Power Each mic input has Phantom power which is a voltage required to make professional condenser mics work. Phantom can be turned off on each input discretely. Four Microphone Inputs All mic inputs are balanced to eliminate electro magnetic noise induced on long cables. Input 1 uses a professional XLR connector more convenient for rental and portable use, and the other inputs use phoenix connectors more suited to permanent installations. RS 232 Designed for integration with a bigger system, it can be controlled by a control system such as Techconnect Control via RS 232. D Class An efficient Digital class amplifier chip dramatically reduces power consumption especially at rest, and makes this amp super small. 3 x Stereo Inputs Three line level stereo inputs accept input from a variety of sources such as computers (via the headphone jack), tablets or phones. Inputs 1 and 2 use 2 phono (RCA) connectors. Input 4 is via a Minijack connector, and is duplicated on the front panel for adhoc access. Line Output A line level pre output on the rear bypasses the internal amplifier. It would connect to a larger amplifier or powered loudspeakers. It is post mix; volume adjustments made on the front panel affects the output level. Auto Standby If the amplifier senses no input it will automatically go into standby mode. When it senses input it will reactivate. Auto standby can be disabled via RS 232. Mounting Options Rack ears are included so it can be integrated into an AV rack. 8 or 4 Ohms The powerful amp can drive a 8 ohm load (two loudspeakers), or 4 ohm load (four loudspeakers).
AV Parts Master
A high quality, melamine 19mm MDF lockable mobile unit. Supplied with: Castors, two lockable. Top and side cable grommets Removable Back Protective Edging Cupboard door opens 270 degrees for maximum access. Available in Beech and Grey melamine as stock item 2 3 days from order.
AV Parts Master
A high quality, single width AV lectern with an 18U ventilated cupboard. Large flat desktop. A fully removable, lockable front panel allows easy access to equipment and cables, includes a sliding key board shelf. Lockable doors are removable with one press on each hinge. Ventilation and cable management, with floor access included. Castors, two lockable, included. Cupboard can be supplied with 19 rack strips and mounts (extra) or adjustable internal shelves (extra). A hinged, fold down side shelf can be fitted (extra).
AV Parts Master
A high quality single width AV lectern with an 18U ventilated cupboard. A fully removable, lockable front panel allows easy access to equipment and cables. Includes a sliding key board shelf. Lockable doors are removable with one press on each hinge. Ventilation and cable management, with floor access, included. Castors, two lockable, included. Cupboard can be supplied with 19 rack strips and mounts (extra) or adjustable internal shelves (extra). A hinged, fold down side shelf can be fitted (extra).
AV Parts Master