[Upgrade] Low cost and high stability, it can replace the basic program of STM32F103C6T6 chip. (If your program flash is less than 32K, RAM is less than 10K, and Timer 4 and Serial 3 are not used, you can use it instead) ST-Link V2 Programmer: supports a full range of STM32 SWD debugging interfaces, simple 4-wire interface (including power supply), fast and stable; interface definition shell directly marked 40pin STM32F103C6T6 minimum system board: Micro-USB connector, which can power the board and communicate with USB. Added 5V power output, and the output I/O port is protected, for fear of operation errors caused by damage to ST-LINK V2 Colour:Random Color, don't accept the specified color Material:Plastic + Metal Package Contents: 1 x STM32F103C6T6 development board (unwelded pin header) 1 x ST-Link V2 downloader (random color, don't accept the specified color) 1 x DuPont line (random color, don't accept the specified color) Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
Firmware Version V7.020. But for that you can count on KESS v2. Software Version V2.23. Once you have the hardware, you can choose which group of protocols to enable and then start working. 14AS00T05S: Adapter to be soldered to the ECU.
eBay
This MSP LSD-FET430UIF is a powerful flash emulation tool to get started with application development quickly on the MSP430 MCU. It includes USB debugging interface used to program & debug the MSP430 in-system via the JTAG interface or the pin saving Spy Bi-Wire (2-wire JTAG) protocol. The flash memory can be easily erased and reprogrammed in seconds with only a few keystrokes. The MSP430 flash is ultra-low power, so no external power supply is required. This debugging tool interfaces the MSP430 to the included integrated software environment and includes code to start your design immediately. The MSP LSD-FET430UIF development tools supports development with all MSP430 flash devices. The USB Debugging Interface is compatible with IAR Version 3.21 or higher. Via USB debugging interface (MSP-FET430UIF), a flash-based MSP430 MCU can be connected to a PC for real-time, in-system programming and debugging Operating system: it can support Windows XP, Windows Vista, Windows 7 (32 & 64-bit) Technical Specifications: Software configurable supply voltage: between 1.8 and 3.6 volts at 100mA Supports JTAG Security Fuse blow to protect code Supports all MSP430 boards with JTAG header Supports both JTAG and Spy-Bi-Wire (2-wire JTAG) debug protocols Material: plastic colour: As shown Package Contents: 1 x MSP 430 debugger 1 x USB cable 1 x 14-pin Flat cable 1 x CD Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
Firmware Version V7.020. No tokens limitation. But for that you can count on KESS v2. Software Version V2.23. Once you have the hardware, you can choose which group of protocols to enable and then start working.
eBay
SM2 PRO+ J2534 VCI Pcm ECU Programmer Dongle V1.20-67 V1.21-11 SM2 PRO+ hardware version: V2.21.21 SM2 PRO+ supports 67 modules for open protocols:Above a total of 67 modules, support thousands of car , read and write ECU and , power upgrade tool, clone ECU to read and write. The best chip tuning tool! What are the advantages of PRO SM2:1. Our hardware supports all J2534 protocol software 2. No need to register and active device. You can work on it directly. And pay more attention to protect personal privacy. 3. When you update your device accidentally. not be locked. You just fall back to the correct driver version to work with. 4. Support latest cars and do programming online SM2 PRO J2534 VCI function: 1. Read and write ECU data 2. ECU clone 3. Adjustment of ECU parameters 4. ECU maintenance technique 5. Turing chip 6. Read the ECU map 7. Checksum Correction 8. Stage1-3, tuning, LC, sportdisplay, immo off, adblue off, dpf off, off, vmax, 9. Read flash and ep files 10. Powertrain Adjustment 11. Support online update 12. Supply VR files 13. Pinout comewwith 14. Helpdesk and tuner accounts 15. Reads OBD2 16. Free holding free no disassembling data reading, greatly reducing the risk of the ECU, bench mode. 17. Cover opening data reading, boot mode Voltage:AC110V Plug Type:US Plug,it applies to Canada, India,Mexico, Thailand, the , the Philippines,Taiwan and so on. Color: AS SHOWN Material: ABS Package Contents: 1SET x SM2 Pro+ J2534 VCI ECU Programmer Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
Firmware Version V7.020. But for that you can count on KESS v2. Software Version V2.23. Once you have the hardware, you can choose which group of protocols to enable and then start working. 14AS00T05S: Adapter to be soldered to the ECU.
eBay
SM2 PRO 1.20 Supports 67 Modules to open protocols: Activate Licenses 12,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,29,30,31,32,33,34,35,36,38,40,42,43,45,46,47,48,50,52,53,54,55,56,57,58,59,60,61,62,63,64,65,66,67,68,69,70,71,72,73,74 Above total 67 modules, support thousands of car brands, read and write ECU and GearBox ,power upgrade tool,clone ECU to read and write. Best chip tuning tools ! Software Version 1.20 Suppors 69 Modules 67 in 1 Active Licenses Important update: 1:Bench cable SM2 PRO+ Bench cable with switch: Gold-plated PCB parent blue shell 1. New SM2 PRO+ bench cable with Kline. it can write the old Toyota and Lexus which car with LLINE. 2. The bench cable with switch so that power supply can be controlled manually and automatically, and it is not easy to burn. Colour:Photo Color Material:plastic Package Contents: 1 x Chip Tuning Tool set Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
1x BOSCH adapter. 1x DELPHI adapter. 1x MARELLI adapter. Item size: like the picture show.
eBay
LED BDM Frame Adapters For KESS KTAG FGTECH ECU Chip Tuning Tool Stainless Steel Features: BDM FRAME with Adapters Set can use For BDM100 programmer,For KESS V2,For Ktag,For Fgtech,For CMD,For ETC. LED BDM Frame with Mesh and 4 Probe Pens for FGTECH BDM100 KESS KTAG K-TAG ECU Programmer Tool. Specifications: 1. It consists of a Acrylic board, Mesh and 4 Probe Pens. 2. After you connect with the probe, disconnect battery for LED, it will work.The probe pin is adjustable. 3. It is the best bracket for ECU Update/ECU Brush and Write/ECM Modified and programming/Probe holder/Dimsport aids. 4. It works with KESS, KTAG, FGTECH, BDM100, KTM100, CMD, DIMSPORT AIDS, and othe ECU chip tuning tools. 5. It is easy to use, much better than the old bdm frame. 6.Material: acrylic + stainless steel. 7.We only have US Plug/EU Plug to choose from. Package Include: 1* xFor BDM frame 1*x Bdm frame with LED 4*x Cable for Probe 4*x Probe Note: No PCB Board in the Package.
Fruugo United Kingdom
Expanded ECU Compatibility: With the ability to work with over 160 ecu programming tool types, including models like 76FXXX and 17.5.5, you have more options to access comprehensive car programming tool kit.
eBay
High quality ST01 01/02 Cable for Digiprog III Digiprog 3 Odometer Programmer 01 / ST02 cable Type: Cable Special Features:Diagnostic emulator Manufacturer Part Number: 66586322 Note : This is only the ST01 Cable,without main unit and other cables colour: as shown Material: Metal+plastic Package Contents: 1 x Automotive cable Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
Solid Performance: The KESS V5.017 is a powerful car computer diagnostic device that provides exceptional efficiency and compatibility with all vehicle types. Its ability to connect online ensures seamless diagnostics, improving your vehicle maintenance routine.
eBay
1. Auto detects ECU and processor type. No need to select from list, everything is automatic! 2. Read/Write of all memories Eeprom, Irom, Xrom (where possible) 3. Patch function for OBD Flashing of TPROT ECU's (supports only VAG at the moment) 4. TPROT / DS check feature, for testing if TPROT is active without opening ECU.5. Supports For upto TP12, For Siemens (current only for ECU's without password protection), For unlocking of VAG Simos PCR and For Simos MPPS V21 ECU List:This module adds support for advanced functions on for Marelli ECU's. MPPS covers a range of controllers including M3.8, M5.9, ME7xx, MED9, MED17, EDC15/16/17, for Delph i, for Siemens, for Marelli, for Delco, for Sagem, for Trionic and many others For Fiat 6F3- Full Read / Write Micro-type, Flash and EEprom over K-line and CAN. For Fiat 6JF - Full Read / Write Micro-type and EEprom over K-line. For Fiat 8DF - Full Read / Write Micro-type and EEprom over K-line. For Fiat 8F2 - Full Read / Write Micro-type and EEprom over K-line and CAN. For Fiat 8F3 - Full Read / Write Micro-type and EEprom over K-line and CAN. For Fiat 8GM - Full Read / Write Micro-type and EEprom over CAN. For Fiat 8GS - Full Read / Write Micro-type and EEprom over CAN. For Fiat 5SF3 - Full Read / Write Flash and EEprom over CAN. For Fiat 5SF3 - Full Read / Write EEprom over K-Line. For Fiat 5SF8 - Full Read / Write Flash and EEprom over K-line and CAN. For Fiat 5SF9 - Full Read / Write Flash and EEprom over CAN. For Fiat ME7.9.10 - Full Read / Write Micro-type over CAN. For Fiat ME7.6.3 - Full Read / Write Micro-type over CAN. For Opel 6O2 - Full Read / Write Micro-type, Flash and EEprom over K-line and CAN. For Opel 6O3 - Full Read / Write Micro-type, Flash and EEprom over K-line and CAN. For Opel 6JO - Full Read / Write Micro-type and EEprom over K-line. Colour:black Material:ABS The actual product may h
Fruugo United Kingdom
Firmware Version V7.020. But for that you can count on KESS v2. Software Version V2.23. Once you have the hardware, you can choose which group of protocols to enable and then start working. 14AS00T05S: Adapter to be soldered to the ECU.
eBay
Test Platform For BMW FEM & BDC When making keys, FOR BMW F series FEM & BDC all need to preprocess the IMMO box.. If there is no test platform, it needs to disassemble and install the control unit in the car back and forth.. Using our test platform can be completed on the bench, It's both economical and convenient. The wire is made of high quality material, with built-in start button, indicator light, IMMO box indicator light, very user-friendly design, and most importantly, high quality and low price. FEM: BDC Module Testing Platform Test Platform For BMW FEM & BDC High Quality Tester For BMW F20 F30 F35 X5 X6 I3 Tool Old FEM BDCDescription: For BMW F20/F30/F35/X5/X6/I3 test platform is easy to detect FEM BDC Control Module in good condition. Working together with for BMW FEM/BDC key programmer (i.e Yanhua for BMW-FEM,for BMW Explorer, VVDI2 for BMW,CGDI Progetc) and for BMW F series FEM Blade key , FEM BDC Module Test Platform is a great helper of key programming, ECU programming and basic diagnosis. Power supply: 12V 5A dedicated Features: 1. No need start-stop button. 2.FEM BDC Module Testing Platform is designed with 4 ports which can connect to engine, gearbox, inst ent and an extended port to connect with other modules. 3. It features in good induction, frequency resonance, the stainless steel shell (the copper wire inside it is very thick)For BMW F20/F30/F35/X5/X6/I3 test platform is a must for professional locksmiths, auto electronic technicians and vehicle repairing 1.please must make sure your car type same one type of our product link. 2.please must check our product photos in the link if same your old part. Material: plastic colour: black Package Contents: 1 x for BMW FEM/BDC Test Platform Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color
Fruugo United Kingdom
1x BOSCH adapter. 1x DELPHI adapter. 1x MARELLI adapter.
eBay