1/2/3 Gang Wireless Wall Switch RF 433Mhz Interruptor Light Switch Remote Control 86 10A 110V 220V Receiver for Lamp LED Fan 433Mhz wireless Wall Switch rf 86 wall panel transmitter Safety Switch and AC 110V 220V relay interruptor for Light Lamp Fan Description: *Single key, two keys and three keys are optional Working voltage: DC12V (one 27a / 12V battery) Operating current: 10mA@12V Encoder: 1527 Specifications: High quality materials for safe use It can be used with 433 frequency switch The design is simple and beautiful Package Included: 1 * switch, 1 * adhesive tape, 2 * expansion screw Notes: This product requires 12V27A dry battery and needs to be purchased separately
Fruugo United Kingdom
Adjustable analog 0-10V adjustable output Voltage value display Display accuracy (Adjustment): 0.1 (Fine adjustment) or 1.0 (Rough adjustment). Have power supply reverse polarity and output short-circuit protection. Encoder adjustment, can be manual adjustment or automatic programmable output: dynamic output continuous . The power supply has reverse connection protection and the output is short-circuit ; 4-digit, liquid crystal display (with backlight); Technical indicators Mounting panel / chassis opening size: 77 * 40mm; Power supply: DC7V---28V (power supply must be 2V larger than the output, for example, 0-10V output, more than 12V power supply); Display adjustment accuracy: according to the displayed value, the lowest 1 (5V accuracy 0.005V); The actual accuracy is 0.02V (compared to the multimeter error); Output maximum current 200mA; Colour:As Shown Material:plastic Package Contents: 1 x Signal Generator Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
The magnetic induction angle measurement sensor module possesses high accuracy for stable work.Multiple output modes: IIC, PWM, voltage, etc. VCC: 3.3V; GND: Power Ground; Out: PWM /Analog voltage output DIR: Rotational direction (ground=Value increases clockwise; thenVCC =Clockwise values are decreased) SCL: IICThe communication clock line; SDA: IICData communication line; : Mode selection (internal pull ground=Programming modeB) Material:plastic colour:White Package Contents: 4 x AS5600 Magnetic Encoder Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
Features: Small size and light weight; Low power consumption, operating current 200 mA; Aluminum alloy casing (CNC processing); Support 32GB TF card (10 level recommended); Built-in 3.7V/400 mAh lithium ion polymer battery; Universal USB charging interface; High-precision 4-level battery power indicator; Multi-language menu, 11 menu language choices; CVBS signal input (built-in video decoder); Support playback and AV signal output (built-in video encoder) System startup time: 3 seconds Video input format: NTSC/PAL Video input impedance: 75? Typ. Video compression format: MJPEG Record file resolution: VGA (640 x 480) / D1 (720 x 480) / HD (1280 x 720) selectable Record file format: Recording sound: ON/OFF selectable Cycle recording time: 10min/20min/30min Frame rate: 30 Frames Memory card: TF card, support up to 32GB (C10 recommended) Menu language: 11 language choices Optical frequency: 50Hz/60Hz can be Video playback: CVBS output (connected to the monitor) Audio input interface: 3.5mm AV jack Audio output interface: 3.5mm AV jack Charging interface: -USB interface Charging voltage: 5V DC Charging current: 500mA Max Battery (non-removable): Built-in 3.7V/400 mAh lithium ion polymer battery Battery life: Each working load is 1.5 to 2 hours of working time. Operating temperature: -10~60C Operating humidity: 85% RH Dimension: 53mm x 33mm x 9mm Menu language: English, French, German, Italian, Spanish, Portuguese, Traditional Chinese, Simplified Chinese, Japanese, Russian, Korean. Color: Black Material: plastic Package Contents: 1 x FPV minimum DVR 2 x AV cable 1 x tape 1 x English Manual Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
1, passive two-wire 4-20MA current loop, the wiring is fully compatible with 2, 3, 4 wire system2,0.01 precision, liquid crystal display, encoder knob, terminal block is not positive or negative3, can set the coarse and fine adjustment mode, the number of turns can be set4, can set the output range: 4-20MA (control equipment) / 3-21MA (debug signal)5, can be set display mode: actual current / 100.0% / 50.0HZ6, linear output, can be calibrated7, can be set to automatically store the output value8, programmable automatic curve output cycle 1-9 segment9, can set 2-9 points to quickly adjust the output, the knob directly calls these currentsTechnical indicators:1.1Power supply voltage:15V---30V;1.2Output range:4-20mA/3-21mA;1.3Display mode: Real Current / 0-100.0%/ 0-50.0Hz;1.4Sampling resistance:Less than 500 ohms;1.5Output accuracy:0.5%;Display accuracy:0.01Colour:greyMaterial:plasticPackage Contents:1 x Signal generatorOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
Product Name: Encoder code with Switch; Adjustment : ; Pin Numbers: 7; Rated Voltage: 5 V. Shaft Diameter: 6mm/0.24inch; Shaft Height: 20mm/0.79inch; Thread Diameter: 6.8mm/0.27inch.Shaft Movement Direction: Action Type: Momentary. Application: for industrial controls, robotics, photographic lenses, computer input devices Shaft type: handle colour:Black+silver Material:plastic Package Contents: 10 x EC11 Encoder with Switch and Knob Caps (20MM) Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
Adjustable analog 0-10V adjustable output Voltage value display Display accuracy (Adjustment): 0.1 (Fine adjustment) or 1.0 (Rough adjustment). Have power supply reverse polarity and output short-circuit protection. Encoder adjustment, can be manual adjustment or automatic programmable output: dynamic output continuous . The power supply has reverse connection protection and the output is short-circuit ; 4-digit, liquid crystal display (with backlight); Technical indicators Mounting panel / chassis opening size: 77 * 40mm; Power supply: DC7V---28V (power supply must be 2V larger than the output, for example, 0-10V output, more than 12V power supply); Display adjustment accuracy: according to the displayed value, the lowest 1 (5V accuracy 0.005V); The actual accuracy is 0.02V (compared to the multimeter error); Output maximum current 200mA; Colour:As Shown Material:plastic Package Contents: 1 x Signal Generator Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
Features: 1. 3.8mm high-quality terminals, long-term non- wire plug-in type for easy wiring 2. Various tests: lithium battery power supply accuracy test, DC24V power supply accuracy test, USB power supply accuracy test 3. One machine in hand, worry-free on site.Coarse and fine-tuning dual-mode travel circles can be set.High precision 0.01 adjustable and calibratable 4. Is easy to debug. High-grade knob cap electroplating button 5. Widely used in: transmitters, secondary instruments, PLC control cabinets, valve positioners, industrial automation DCS , etc. Product parameters: A Power supply mode: external power supply DC15-30V, external microUSB5V B. Voltage output: 0-10V adjustable, the accuracy after calibration is 0.01V, the maximum current is 20mA C. Current output: 0-22mA adjustable, the accuracy after calibration is 0.01mA, the load equivalent resistance 500 ohms D. Power consumption parameters: external power supply DC15-30V, power 1W (not charging)/5W (charging) External microUSB-5V, current 0.2A (not charging)/1A (charging) e display elements: 4-digit 0.4-inch digital tube E. Setting button: encoder, 20 pulses per circle F. Optional type: only USB/DC24V power supply model without lithium battery model Precautions: 3 power supply modes, only 1 channel can work, and can also be connected at the same time Material: plastic colour: As shown Package Contents: 1 x Signal Generator Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom