1. Easy and simple to upgrade your car stereo Bluetooth hands-free wireless audio!2. Play your smartphone, iPad, iPod, and other devices with Bluetooth products to music on, you can make your way through the wireless from your car stereo to play back synchronized to music on your smart device!3. You can in the car within the scope of smart devices cozy browse your music on the list to select their own favorite music play / pause; previous song; next song, music selection, hands-free calls, etc.4. Up to 90dB SNR and low audio distortion of 0.05%, fully satisfy your demand for high quality audio!5. Support Bluetooth hands-free function, you can listen to music while the bobble any phone!
Fruugo United Kingdom
Compatibility:This protective skin is only compatible with for controller, not for controller or NS . Full Protection:The precisely cut silicone case skin provides full and reliable protection for the controller against scratches, dirt and drops caused by daily use. Superior Grip:This case features a non-slip texture design that enhances your control and grip during intense gaming sessions, ensuring you can focus on without worrying about dropping your controller. Full Protection:Protect your for controller from scratches, dust, and accidental impacts, extending the life of your device while keeping it looking fresh and bright. Easy Installation:Easy to install and remove, allowing you to easily replace the cover or clean your controller at any time. Colour:pink Material:Silicone Package Contents: 1 * Protective Cover kit Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
1) quality products. 2) Perfect match for the original one. 3) Made of high quality materials. 4) Easy installation and use. 5) Stable characteristics, high reliability. Name:Air Intake Pipe Type:Auto Parts Fit:For Land cruiser 2010+ Colour:As Shown Material:Metal Package Contents: 1 * Intake Pipe Kit Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
1. This Steam Cleaner Replacement Nozzle Brush kit of brushes is applies to SC1, SC2, SC3, SC4, SC5, ensuring seamless fit and easy connection to enhance your cleaning experience.2. These brushes are designed with bristles and are designed to handle stubborn sticky dirt and grime. Whether its dried mud or kitchen spills, the sturdy bristles penetrate deep into the to thorough cleaning with every use.3. These brushes are perfect for a variety of cleaning tasks and perform well on surfaces such as tile grouting, faucets, and oven doors. Their versatile design makes them an indispensable tool for detailed cleaning in high- and low-traffic areas of your home.4. This Steam Cleaner Replacement Nozzle Brush kit , which allows you to specify brushes for different areas such as kitchens and bathrooms to prevent -contamination. The color-coding system promotes and improves cleaning efficiency.5. Simplified installation: This accessory is designed for easy installation and can be quickly installed or removed for easy cleaning and maintenance. This is an important function to enhance user experience and operational convenience.Compatible with multiple steam mop models.Ideal for deep cleaning and stain removal.Easy to attach and use, enhancing the functionality of your cleaning machine. construction ensures long-lasting use and satisfaction.Function: ConsumablesUse environment: Home useColour:As ShownMaterial:Nylon + copperPackage Contents:1 * Steam Cleaner Replacement Nozzle Brush kitOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
100% APPROPRIATE FOR CPAP MACHINE 2Quick install and easy to use Recommend 6 Month Replacement:It is advised to replace the filter and valve 6 months. Universal Compatibility: Filter Replacement Kit is using an exquisite design, perfectly compatible with SC1200 and SC2 machines, featuring the same effect as the . Convenient to Install: CPAP Filter Kit is used to replace old or broken filters, is easy to install without additional tools, and without risk of leakage. Easy Carrying: CPAP Machine Filters are no need to specially prepare a storage bag for , small, exquisite, lightweight, and easy to carry out at any time. Material: Plastic colour: grey Package Contents: 4 x Filter 4 x Check Valve Assembly Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
Description: 100% Brand New and High Quality Product Name: Double Insulator; Battery Material: ABS Size: 68 x 52 x 68mm/2.68 x 2.05 x 2.68 inches Continuous Current: 80-100A Instantaneous Current: 125A Current Consumption-Charge: 240mA Poboacute; r Current-Standby: 8mA Opoacute; Disconnection Time: 5-10 seconds Recommended Fuse: 80Amp Power Pin: M6 Copper Screw Nut Surge Protection: Built-in Application: Most 12V 4WD Marine, Weight; caravan, SUV ATV UTV, etc. Feature: Double Insulator; battery life: Double; The insulator battery can charge both batteries at the same time and then isolate them from each other when the vehicle is switched off, ensuring that the starter battery is always charged and ready. Voltage Sensitive Relay: Isolator Kit; in double; This battery is equipped with a 12V 140A voltage sensitive relay isolator. The voltage-sensitive relay will lower the voltage to ensure that the first battery is always charged and ready to start the car. IP65 Waterproof: The battery car relay is waterproof up to IP65, so it can be used even in dusty, wet, and unexpected extreme weather conditions. The shell is made of premium ABS, anti-impact, strong and durable. Compact size: Double; The battery insulator is compact in size, about 68 x 52 x 68 mm / 2.68 x 2.05 x 2.68 inches. Perfect fit under the hood to get closer to the double; batteries. Compact size
Fruugo United Kingdom
Description: 100% brand new Name: front and rear lights Material: PLA+Plastic Specification: Front Lights + Rear Light Suitable for model:For ARRMA 1/14 Mojave GROM RC Features: 1/14 Small Mojave Mojave GROM RC RC remote control electric desert card short card conversion front and rear lights. Product received in loose condition. The front window light is curved, when installing, you need to remove the two screws in front of the roof scuff bar, and then use the screws that come with the product. Reinstall from the removed position down. Refer to the product detail picture. The green arrow marks the screw position. Put the front window light in it and fix the screws with the right holes. Don't screw hard when you feel it will be more laborious to install the screws to the head. Avoid slipping teeth. The plug of the lights should be put through the back of the mannequin from the position of the rear fender. The rear taillights are a tight fit and require the light bar to be tucked inside one of the frame structures on the stock rear end. There are two concave slots in the outer contour of the light housing. Snap into the uprights on either side. Then use the product matching two small snap, factory and tail light body shell for the pre-installed state, the installation needs to loosen the screws of the snap, stuck on both sides of the column after re-installing the small snap. Can be realized fixed. With double-sided tape for wiring to avoid wire wear by the tire. Refer to the detail picture for wiring. Directly occupy the original fan interface. Then connect the fan connector to the product. The female connector of the sub-interface. Can be realized. Light up while not affecting the use of the fan Package List: 1 set of front and rear lights
Fruugo United Kingdom
1.Flexible and easy to use.Perfect match with the Motorcycle 2. 3.Built to strict quality control standards.Not easy to damage, long service life 4.Stable performance, high reliability.a perfect replacement for your old ones 5.Made of high quality material, for durable use. Item Type:Motorcycle Fairing Side Cover Condition: Fitment:Direct Replacement For Harley FLTRXSE 2023-later and FLTRXSTSE models 2024; For Harley CVO Road Glide FLTRXSE 2023-2024; For Harley CVO Road Glide ST FLTRXSTSE 2024; For Harley CVO Road Glide Upgrade 2024 Colour:Black Material:Metal+ABS Package Contents: 1SET x Motorcycle Fairing Side Cover Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom