ESP32-ETHO1 is an embedded serial-to-Ethernet module based on the ESP32 series. The module integrates an optimized IP protocol stack, which makes it easy for users to complete the networking function of embedded devices, greatly reducing the development time cost. It has ultra-high RF performance, stability, versatility and reliability, as well as ultra-low power consumption. The module board width is a universal width. The module can be directly welded on the board, the connector can be welded, and it can also be used on the breadboard, which is convenient for users to use in different scenarios. WIFI frequency range: 2.4-2.5 GHz Network port specifications: RJ45, 10/100Mbps, -connection and direct connection adaptive Serial port baud rate: 80-5000000 Onboard Flash: 32Mbit Operating voltage: 5V or 3.3V power supply (choose one) Operating current: average: 80mA Power supply current: minimum: 500mA The product appearance and printed words depending on the batch, but this does not affect use. Colour:Black Material:PCB Package Contents: 1 * Wireless Module Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
Low power consumption, high stability, and strong universality. Extract 38 module pins from the board. Specifications: HW-573B (CP2102 module), HW-573C (CH9102X) (optional). Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures.
eBay
The module is safe, reliable and scalable to a variety of applications The expansion board adopts a double-layer design with pin headers on both sides Good stability and high reliability This breakout board can expand the 1 GPI0 pin of the ESP32-S3 board to 2, perfect to reuse all pins and a great tool for your projects Made of high-quality materials, sturdy and Number of PCB layers: 2 layers PCB thickness: 1.6mm Model: ESP32-S3 Applicable: Suitable for N8R2 N16R8 development board Depending on the batch, the printed words on the product will be different, which does not affect use Colour:Black+Green Material:Plastic Type: B: ESP32-S3 Expansion Board Package Contents: 1x Expansion Board Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
USB driver chip: CH340C, with good system compatibility, faster download speed, and more stability. 1 Expansion Board. All pictures are for illustration purpose only and Colours may vary slightly. Module model: ESP32-WROOM-32.
eBay
Overview: This desktop gadget, based on ESP32 C3, is not only a practical mini-TV but also a unique design artwork. Its 1.44-inch LCD screen, driven by ST7735S, can run small and short videos with LVGL drive. Additionally, it can connect to WiFi to display the current weather and time, providing convenience in your daily life. Its distinctive design allows it to be not just a desktop decoration but also a portable pendant, allowing you to showcase your personality and taste whether you are on the subway or on the street. Features: Power supply: 5V Display driver interface: SPI Screen driver IC: ST7735S Screen resolution: 128x128 Compatible battery type: 3.7V lithium battery with 1.27mm plug Main control: ESP32 C3 with WiFi and Bluetooth capability. Material: plastic+metal colour: Black Package Contents: 1 x Portable Pendant Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
The ESP32 chip has 32 GPIO pins with support for I2C, I2S, SPI and UART. In addition it has multiple analog to digital channels and digital to analog, hardware accelerated encryption, pulse width modulation, capacitance touch interfaces and a lot more.
eBay
Rich expression Helps you fully understand your - Anthropomorphic animation expression, accurately plant , timely ,immediate care. Incarnation to accompany adorable pet - 5 Interactive Gestures to Unlock Fun Life. Perception System - Built-in 7 high-precision sensors customized for plants, monitoring plant growth status at all times. EQ and IQ - Behind all cute and smart isa complex behavior tree system driven by the ESP32 high-performance processor to realize the anthropomorphic communication fun of plants. Real-time detection of big data - Real-time data with intelligent algorithms, 24 hours a day to protect your plants. Screen multi-function switch - Equipped with expression maintenance mode, time weather mode, sensor list mode, tomato clock mode, etc. to meet your different needs. Colour:Green Material:Plastic Package Contents: 1 * Smart Flowerpot 1 * Charging Cable Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
NodeMCU is an open source IoT platform, it uses Lua scripting language programming, the platform is based on the eLua open source project, the platform uses a lot of open source projects, such as lua-cjson, spiffs.
eBay
M5StickC PLUS2 is powered by ESP32-PICO-D4 with Wi-Fi and is an upgrade of the M5StickC with a bigger screen .It is a portable, easy-to-use, open source, IoT development board. This tiny device will enable you to realize your ideas, enrich your creativity, and speed up your IoT prototyping. Developing with M5StickC PLUS takes away a lot of the pains from the development process. M5StickC Plus is one of the core devices in M5Stacks product series. The compact body is integrated with rich hardware resources, such as infrared, RTC, Microphone, LED, IMU, Buttons, PMU,etc Power switch operation: Power on: Press power button for 2 seconds Power off: Press power button for 6 seconds Product Features ESP32-based support Wi-Fi Built-in 6-Axis IMU Red LED IR mitter Microphone RTC Buttons, LCD(1.14 inch) Built-in Lithium Polymer Battery Extendable Socket Built-in Passive Buzzer Wearable & Wall mounted Compatible with multi-platform development Applications Internet of things terminal controller Wearable devices Stem education product DIY creation ESP32: 240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi Flash Memory: 4MB Power Input: 5V @ 500mA Port: TypeC x 1, GROVE(I2C+I/0+UART) x 1 LCD screen:1.14 inch, 135*240 Colorful TFT LCD, ST7789v2 Button: Custom button x 2 LED: RED LED MEMS: MPU6886 Buzzer:built-in buzzer IR: Infrared mission MIC:SPM1423 RTC:BM8563 PMU:AXP192 Battery: 120 mAh @ 3.7V Antenna: 2.4G 3D Antenna PIN port: G0, G25/G36, G26, G32, G33 Operating Temperature: 0°C to 60°C Tips: The product may be updated constantly ,Due To Different Batches, The Actual Product May Have Slight Differences Or Color Differences, Which Does Not Affect Use Colour:Photo Color Material:plastic Package Contents: 1 x Graphical Programming Kit Only
Fruugo United Kingdom
A high quality solderable prototyping breadboard with over 480 holes and two bus bars for power, double sided plated through (FR4). Solderable breadboard. 80mm x 67.3mm x 1.6mm. Don't forget to look atMy Other Boards.
eBay
1. Processor: ESP32-S3R8 Dual-core LX7 microprocessor 2. Network: WiFi 3. Power supply: USB-A 4. Hashrate: 49KH/s 10% 5. Power consumption: 1Watt 7. Noise (noise): Less than 10db Colour:Photo Color Material:Plastic+PCB Package Contents: 1 x Mining Machine Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
ESP32 CH340G MicroPython 4MB Micro USB. Integrated 802.11 BGN WiFi transceiver. Integrated dual-mode Bluetooth. Logic level: 3.3V.
eBay
M5StickC PLUS2 is an iterative version of M5StickC PLUS, featuring the ESP32-PICO-V3-02 chip as the main controller with built-in WiFi functionality. The compact device integrates a wealth of hardware resources within its small form factor, including infrared, RTC, microphone, LED, IMU, buttons, buzzer, and more. It boasts a 1.14-inch TFT screen with a resolution of 135 x 240, driven by the ST7789V2. The battery capacity has been increased to 200mAh, and the interface also supports HAT and Unit series products. This compact and versatile development tool is designed to spark limitless creative possibilities. M5StickC PLUS2 facilitates the rapid prototyping of IoT products, streamlining the entire development process. Even beginners in programming can easily build interesting applications and apply them to real-life scenarios using M5StickC PLUS2. Power on: Wake up can be started by pressing "BUTTON C" for more than 2 seconds, or IRQ signal triggered by RTC regularly. After triggering the wake up signal, the hold(G4) pin needs to be set to a high level (1) in program initialization to maintain the power supply, otherwise the device will enter the shutdown state again. Power off: When there is no USB external power supply, press "BUTTON C" for more than 6 seconds; Or when there is no USB external power supply, set HOLD(GPIO4)=0 in the program operation, that is, to achieve power off. Features: ESP32-PICO-V3-02-Base,support WiFi Built-in 6-Axis IMU IR mitter Microphone RTC Buttons, LCD(1.14 inch) Built-in Lithium Polymer Battery@200mAh Extendable Socket Built-in Passive Buzzer Wearable & Wall mounted Applications: Internet of things terminal controller Wearable devices Stem education product DIY creation Different batches may have different appearance, which does not affect use. Color: yellow Material: ABS Package Contents:<
Fruugo United Kingdom
Note: The maximum operating current of this battery is only about 1.5A, can not be used for unmanned aerial vehicles, model aircraft or power tools and other products that require high current. 2. Connector is Micro JST 1.25 plug, it can be used for esp32 arduino development board whose plug is 1.25mm Specification: Standard Voltage: 3.7V Capacity: 1100mAh Approx Weight : 18g Dimensions(±2mm): 45 * 25 * 10 mm / 1.77 * 0.98 * 0.39inch(L*W*H) Discharge Rate: 1C Working Current: 1.5A The maximum discharging current: 3C Overcurrent Protection: 1.8-2.1A Type of Connector: Micro JST 1.25 Standard Charging Method: Charging this battery to 4.25V at 0.2C constant current, then charge the battery at a constant voltage of 4.2V till it's charging current≤ 0.05C. Package includes: 4 * 1100mAh 3.7V.
eBay
1. Using ESP32-S3 master control, 1.9-inch IPS high-definition color screen 2. Using SI4732 chip, supporting full-band broadcast, LSB USB AM FM mode. 3. Built-in 800 mAh battery, battery life is about 10 hours or more. 4. Equipped with 70cm portable telescopic antenna for reception. 5. Shell petg 3D printing. Master control: ESP-32-S3 Receiving frequency band: HF SW MW VHF Screen: 1.9-inch, 170*320 Charging interface: TYPE-C (cannot use fast charging) Audio interface: 3.5mm three-band stereo Battery capacity: 800ma Colour:black Material:ABS Package Contents: 1 x MINI SI4732 radio 1 x telescopic antenna Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
ESP32 38-Pin What is it?. How do you use the ESP32 38-pin?. It also has the CP2102 chip which is responsible for USB-Serial communication. The ESP32 38 Pin is specially designed to work with a protoboard and with the help of Dupont cables quickly connect all types of sensors.
eBay