Read and write ECU data via OBD, on BENCH and in BOOT / JTAG mode.ECU R /W protocols without opening the cover.Master version, save data in bin format, data not encrypted. ECUHelp software allows you to forcibly write (forcibly clone) the label words on the product are random, Cannot be chosen the specific words. The actual product may have slight differences or color differences. Top reasons why ECU Tuner Prefer to ECUHELP PCMFlash 67 in 1?1. ECUHelp design it, more suitable for our groups2. Not only for chip tuning but also for locksmith and ecu repairs worker. 3. Not only just for reading and writing, but can supply more solutions when you have our tool Plug Type :EU Plug,it applies to Indonesia, Germany, France, Spain, Italy and so on. Read and write ECU data ECU clone ECU parameter adjustment ECU maintenance engineering Chip tuning: Stage1-3, gearbox tuning Read ECU maps Checksum correction ECU SERVICE:Checksum Correction (Under Development), Glow Plugs , MovData (Under Development), NOX Sensor, O2 Sensor Special Repairs, Start - Stop, TPROT Remove (Tuning Protection), TVA, Update Logs, Y75 Removing Read flash and ep files Powertrain adjustment Supports online update VR files supply Pinout come with Helpdesk and tuner account OBD2 reading Cover-free wielding-free no disassembly data reading, greatly reduce the risk of the ECU, bench mode. Cover-opening data reading, boot mode Supports 67 Modules to open protocols: Activate Licenses: 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,29,30,31,32,33,34,35,36,38,40,42,43,45,46,47,48,50,52,53,54,55,56,57,58,59,60,61,62,63,64,65,66,67,68,69,70,71,72,73,74 Above total 67 modules, support thousands of car , read and write ECU and GearBox ,power upgrade tool,clone ECU to read and write. Best chip tuning tools ! Voltage: AC 220V Colour:Black Material:plastic Package Contents: 1 x ECU Programmer set Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
1. Built-In High-Frequency Antenna, Corresponding To The Antenna Depth, Eliminates Blind Spots, And Reads The Entire Data Card Without Interruption. 2. Increase The Frequency Of Keystrokes, The Size Of The Card Can Hold Everything. The Data Analysis Is Completely Stable And The Error Rate Is Low. 3. The Low-Frequency Antenna Improves The Signal-To-Noise Ratio, The Recognition Speed Is Higher, And The Mobile Design Meets Needs. 4. No Antenna Interface, No Need To Connect, Easy To Damage. 5. It Is Simple And Convenient To Cancel The Lithium Battery. (In Offline Mode, You Can Use The Power Bank) Material: PC+Metal colour: black Package Contents: 1 x RFID Card Reader Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
1. Built-In High-Frequency Antenna, Corresponding To The Antenna Depth, Eliminates Blind Spots, And Reads The Entire Data Card Without Interruption. 2. Increase The Frequency Of Keystrokes, The Size Of The Card Can Hold Everything. The Data Analysis Is Completely Stable And The Error Rate Is Low. 3. The Low-Frequency Antenna Improves The Signal-To-Noise Ratio, The Recognition Speed Is Higher, And The Mobile Design Meets Needs. 4. No Antenna Interface, No Need To Connect, Easy To Damage. 5. It Is Simple And Convenient To Cancel The Lithium Battery. (In Offline Mode, You Can Use The Power Bank) Material: PC+Metal colour: black Package Contents: 1 x RFID Card Reader Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
for VCI Scanmatik 2 Pro ECU Programmer Tool Bench Colour:Photo Color(Transparent blue shell) Material:plastic SM2 PRO 1.20 Supports 67 Modules to open protocols: Activate Licenses 12,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,29,30,31,32,33,34,35,36,38,40,42,43,45,46,47,48,50,52,53,54,55,56,57,58,59,60,61,62,63,64,65,66,67,68,69,70,71,72,73,74 Above total 67 modules, support thousands of car , read and write ECU and GearBox ,power upgrade tool,clone ECU to read and write. Best chip tuning tools ! Software Version 1.20 Suppors 69 Modules 67 in 1 Active Licenses Important update: 1:Bench cable SM2 PRO+ Bench cable with switch 1. New SM2 PRO+ bench cable with Kline. it can write the old and which car with LLINE. 2. The bench cable with switch so that power supply can be controlled manually and automatically, and it is not easy to burn. Plug Type: US Plug, it applies to Canada, India, Mexico, Thailand, Taiwan, the , the Philippines and so on. Voltage: AC110V Package Contents: 1 x Chip Tuning Tool set Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
Many encrypted new car models works for 76FXXX, for 17.4.4, for E83, for 17.5.5 (1766), for - 276ECU, for 76F, etc. 100+ ECU types added,Software version: V2.25,Hardware version: V7.020 Multi-Language available: Italian Deutsch English French Portuguese Spanish,Support BDM Function Well, no checksum error, available Protocols BDM MPC5xx Support both Car, Motorcyle and Truck ECU Programming,Add New File type (FENDT//VALTRA TRACTOR for EDC17CV41 ENGINE CAN,Update: By CD Using tips: 1. Please Only Use Our Software 2. : Better to Use Win XP 3. Tip (Very important): During operation, disable the internet connection; otherwise the software may get damaged. Advantage of KTAG V7.020:There are lot ECU that need to disassemble from the car and open and this is the case for all the ECU that need to be programmed with Jtag, BDM and Boot protocols, so KTAG is needed,as the ktag master,ktag 7.020 is the .Online operation supported.Best PCB With filters.With a great performance and tested by many tuners and was regarded as one of the best ECU Programmer for trucks,heavy duty,boat. Plug Type: US Plug, it applies to Canada, India, Mexico, Thailand, Taiwan, the , the Philippines and so on. Voltage: AC100-240V Colour:Black+Red Material:PCB+Electronic component+Plastic+Metal Package Contents: 1 x Main Unit 1 set x accessories 1 Adapter(random color, don't accept the specified color) Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
HD 2.8 inch full color screen,clear display,built-in multi-lingual. ID/IC full hand and voice broadcast (In English) Support read write frequency: 125KHz, 250KHz, 375KHz, 500KHz, 625khz, 750kHz, 875KHz, 1000KHZ, 13.56MHz (ISO1443A/B), support HID Prox cards. Support card read: EM4100/EM4200, Mi- classic, UID cards, Ultralight, HID 1386/1326/1346, Ntag203 Support cards write: T5577, EM4305, HID 1386/1326/1346, UID cards. Digital keys to enter the card number can be entered directly. Has USB interface Working with 4*AAA battery, standard handset, easy to carry. (not included) Comes decoding,direct preparation of types of smart card access door. How to read and write normal RFID cards 1. Press the "on/off " button. 2. Put the cards on the back of the copier. The copier will be show the "" page. Press "ok" 3. Put the cards on the back side of the copier and press "scan" 4. The copier will scan and show the card number. 5. Put one writable T5577(125khz writable chip) or UID(13.56mhz writable chip) card on the back side of the copier and press "Write" Colour:white Material:plastic Package Contents: 1 x NFC Reader Writer 1 x usb line 5 x 125khz buckle 5 x Management card Only the above package content, other are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
Note: Our readers have limited applicability and cannot match all types of FRID cards.Built-in buzzer and LED. The reading distance is 0-6 cm (0-2.4 inches).Compatible with most 125KHz RFID cards. Supports EM4100 ID cards. 5200 cards. AWID cards. EM4305 cards. T5577 cards and some types of HID cards. 13.56MHz IC card or UHF. UID card. HID iCIass. HID Pr0xCard II. HID Pr0xKey III are not supported.Handheld shape design. Comfortable in hand. operates on 2 AAA batteries. easy to use and carry. (batteries not included)Widely used in homes. communities. schools. offices. hotels. elevators. and any other place that requires security monitoring or access control support.Colour: BlueMaterial: PlasticPackage Contents:1 * RFID ID Writer10 * EM4305 Writable CardOnly the above package content. other products are not included.Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
1. Support for B- and CAS4 (0K50E/2K79X/0L01Y/0L15Y/1L15Y, etc.) 2. Support for B- EWS4 (2L86D) 3. Support for B- EZS (1J35D/2J74Y/4J74Y/3K91D/1L85D/1L59W/3L40K/4L 40K, etc.) 4. Support a of modules:(9H91F/0K13J/0K75F/0L85D/0J38M/1E62H/1K7 9X/5H55W, etc.) 5. Applicable to all kinds of EIS///ECU automotive modules. R270+ for CAS4 BDM Programmer includes all the features of CAS3 programmer.Directly read and write chip data quickly and safely, support for the new 2009 7 Series (F01/F02) CAS4 odometer and chips read and write data, safe and effective. Top 3 Reasons to Get R270+ for 1. Software Version: 1.2 2. Supported for Car Model Year: Most 2001-2009 3. Support M35080 Series of Quick Clear, Read and Write (35080/35080-V6/35080-/D80 D0WQ/D160/35160, etc.) Directly read and write chip data quickly and safely, support for the new 2009 7 Series (F01/F02) CAS4 odometer and chips read and write data,safe and effective. CAS4 includes all the features of CAS3 programmer. It has a powerful MCU programming function: removing-free programm MCU EEPROM (HC908) and FLASH (HC912, HC9S12, HC9S12X) series. Plug Type:US Plug, it applies to Canada, India, Mexico, Thailand, Taiwan, the , the Philippines and so on. Voltage:AC100-240V Colour:As Shown Material:plastic Package Contents: 1 x R270 main unit 1 x 26pin cable 1 x AC Adapter 1 x USB Cable 1 x Adapter 1 x CD drive Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom