RA Studfix V2 NM (Nursery School Model with lower screen height positions) A complete Floor to Wall Mounting System suitable for Flat Screens with a maximum recommended weight of 80kg and maximum VESA configuration of 800x600. Designed for use in Nursery and Primary School environments where a lower screen position is required. This Nursery Model allows the bottom of an average sized 65 inch screen to be positioned approximately 25cm from Floor Level. A complete installation solution designed to enable Flat Screens or Touch Screens to be fixed to a wooden stud partition wall or solid wall and direct the weight of the screen directly to the floor. Ideal for installations when the wall itself cannot support the weight of a heavy screen. Suitable for Smart, Clevertouch, Ctouch, Promethean ATP, Philips, Samsung, LG, Panasonic, BENQ, iTouch, Vividtouch, Hitachi, Iiyama, iBoard, Genee Screens and many more................ The system includes two upright supporting box section legs which are fixed to the existing upright wooden studs inside the wall with a Wall Mounting Plate and Floor Plate included in the kit. This creates a rigid, safe and strong fixed mounting frame for the Flat Screen Mount (included) to fix onto and position the screen at a selection of height settings. All fixings, bolts, coach screws and plastic caps are included for a very neat and tidy installation. The two Upright Supporting Legs are hollow box section design and allow all connection cables to and from the screen to be routed through them. Cable exit entry slots are positioned on the inner sides of each leg to enable surface mounted cable trunking to route cables away to a connection panel if required (not included). Maximum CENTRE POINT of screen from floor level is approximately 1060mm. Minimum CENTRE POINT of screen from floor level is approximately 760mm. The Wall Mounting Plate can be fixed to the wall in a LOWER or HIGHER position to avoid any dado rails or network trunking on the walls surface. In the LOWEST position the centre of the plate will be 650mm from floor level and in the HIGHEST position the plate will be 980mm from floor level. The Wall Mounting Plate itself is 120mm high and has four mounting slots 400mm apart. Upright supporting legs are 500mm apart (centre to centre). Finished in durable White or Black powder coat finish. An Optional Extra Media Shelf is available for this system (RA Studfix Shelf) which can be positioned under the screen at a selection of height settings.
AV Parts Master
Excellent materials: plasterboard fixings are made of high quality carbon steel materials, stainless steel flat washers, high strength, corrosion resistance, rust resistance, not easy to deform or break, strong and durable.
eBay
20 or 10pcs M4 Door Handle Fixing Screw Bolts Snap Off Cuttable Connecting Screws for Door Knob Handle Locks Hardware 45mm-110mm
Aliexpress UK
Heavy Duty Projector Ceiling Mount with Micro Adjustment BT893 For Projectors up to 70kg (155lbs) Designed to mount projectors up to 70kg, the BT893 heavy duty projector mount can be fixed directly to the ceiling or can be mounted to any 50mm B Tech pole. Easy adjustment of tilt, yaw and roll, with additional micro adjustment at each corner makes alignment of projections quick and simple. The projector fixes to a mounting plate that can be extended to accommodate larger fixing patterns using the included extension legs, making the BT893 ideal for large scale and precision applications such as events and staging or for edge blending and projection mapping. Features Designed to mount heavy duty projectors to the ceiling Features easy, incremented tilt adjustment Micro adjustment thumbwheels at 4 points for controlled and precise adjustment of the projector Ideal for use with projection mapping projectors Quick and easy assembly Can be mounted to the ceiling directly or to any B Tech 50mm pole Optional extension legs can be used to accommodate larger fixing patterns Suitable for projectors using M6, M8, M10 and M12 fixings All mounting hardware included Specifications Maximum load: 70kg (155lbs) Tilt adjustment: 20 10 ( 5 with micro adjustment) Roll adjustment: 5 Yaw: 25 (ceiling mounted) 45 (pole mounted) Maximum distance between any two fixing points: 873.2mm (34 ) Maximum square fixing pattern that can be mounted: 617.5mm (31 ) Original designs by B Tech AV Mounts registered designs patents apply
AV Parts Master
【Wide Application】Suitable for other hollow substrates such as plasterboard, cavity wall, fiberboard, wood board and door. 【Design and installation】The nut adopts a foldable wing design. When installing, first open a hole in the wall, then combine the nut, bolt and washer, hold the wing, put it into the wall hole together, and tighten the bolt as required.
eBay
Monitor Audio C180 single in ceiling speaker Incorporating an 8 inch MMP II bass driver with Monitor Audio s signature C CAM Gold Dome tweeter to provide high performance sound, ease of drive, and wide frequency response and dispersion. Optimum imaging and set up are established via a pivoting tweeter and high frequency ( 3 dB 0 dB 3 dB) level adjustment. Optional square grille can be used with this model. Specifications Frequency Response 50 Hz 25 kHz Nominal Impedance 6 ohms Sensitivity (1W 1M) 90 dB Maximum SPL 111.6 dBA Power Handling (RMS) 120 W Recommended Amplifier Requirements 30 120 W Drive Unit Complement 8 MMP II cone bass driver 1 C CAM pivoting Gold Dome tweeter Adjustment Controls HF Level Switch ( 3 dB 0 dB 3 dB) Overall Diameter (Including Grille) 285 mm (111 4 ) Overall Depth (Including Grille) 126 mm (415 16 ) Mounting Depth 122 mm (413 16 ) Cut Out Hole Diameter 247 mm (93 4 ) Fixing Type 3 position Tri Grip dog fixings Optional Square Grille Outer Dimensions 285 x 285 mm (111 4 ) Construction Material Mineral filled ABS, RoHS compliant Weight 2.72 kg (6 lb) Pre Construction Bracket CB8 Pre Construction Bracket (Green) Back Box CCBOX R CMBOX R Sold As Single Unit
AV Parts Master
90° Woodworking Fixed Right Angle Clamp 90 Degree Corner Clips Fast Adjustable Quick Spring for Cabinets Photo Framing Fixing
Aliexpress UK
Perfect for both professional and personal use, this set ensures you have plenty on hand for any job or project. Key Benefits ✅ Cost-effective bulk solution. ✔Total Quantity: 100 pieces.
eBay
1-8Pcs Bullet Piercing Valve Line Tap BPV31 Hvac Parts Seal Refridgerator Ac Part Fixing Tools Bullet Puncture High Quality
Aliexpress UK
【Wide Application】Suitable for other hollow substrates such as plasterboard, cavity wall, fiberboard, wood board and door. 【Design and installation】The nut adopts a foldable wing design. When installing, first open a hole in the wall, then combine the nut, bolt and washer, hold the wing, put it into the wall hole together, and tighten the bolt as required.
eBay
RA Studfix V1 NM (Nursery School Model with lower screen height positions) A complete Floor to Wall Mounting System suitable for Flat Screens with a maximum recommended weight of 65kg and maximum VESA mount configuration of 600x400, designed for use in Nursery and Primary School environments where a lower screen position is required. This Nursery Model allows the bottom of an average sized 65 inch screen to be positioned approximately 25cm from Floor Level. A complete installation solution designed to enable Flat Screens or Touch Screens to be fixed to a wooden stud partition wall or solid wall and direct the weight of the screen directly to the floor. Ideal for installations when the wall itself cannot support the weight of a heavy screen. Suitable for Smart, Clevertouch, Ctouch, Promethean ATP, Philips, Samsung, LG, Panasonic, BENQ, iTouch, Vividtouch, Hitachi, Iiyama, iBoard, Genee Screens and many more................ The system includes two upright supporting box section legs which are fixed to the existing upright wooden studs inside the wall with a Wall Mounting Plate and Floor Plate included in the kit. This creates a rigid, safe and strong fixed mounting frame for the Flat Screen Mount (included) to fix onto and position the screen at a selection of height settings. All fixings, bolts, coach screws and plastic caps are included for a very neat and tidy installation. The two Upright Supporting Legs are hollow box section design and allow all connection cables to and from the screen to be routed through them. Cable exit entry slots are positioned on the inner sides of each leg to enable surface mounted cable trunking to route cables away to a connection panel if required (not included). Maximum CENTRE POINT of screen from floor level is approximately 1060mm. Minimum CENTRE POINT of screen from floor level is approximately 760mm. The Wall Mounting Plate can be fixed to the wall in a LOWER or HIGHER position to avoid any dado rails or network trunking on the walls surface. In the LOWEST position the centre of the plate will be 650mm from floor level and in the HIGHEST position the plate will be 980mm from floor level. The Wall Mounting Plate itself is 120mm high and has four mounting slots 400mm apart. Upright supporting legs are 500mm apart (centre to centre). Finished in durable White or Black powder coat finish. An Optional Extra Media Shelf is available for this system (RA Studfix Shelf) which can be positioned under the screen at a selection of height settings.
AV Parts Master
Magnetic Tape Self Adhesive Cuttable Rubber Magnetic Strip for Fridge Wall DIY Photo Poster Fixing Tape Home Office Storage Tool
Aliexpress UK
Monitor Audio C165 In Ceiling Speaker Incorporating a 6 1 2 inch MMP II bass driver with Monitor Audio s signature C CAM Gold Dome tweeter to provide high performance sound, ease of drive, and wide frequency response and dispersion. Optimum imaging and set up are established via a pivoting tweeter and high frequency ( 3 dB 0 dB 3 dB) level adjustment. Optional square or premium grille can be used with this model. Specification Frequency Response 60 Hz 25 kHz Nominal Impedance 6 ohms Sensitivity (1W 1M) 88.5 dB Maximum SPL 107.4 dBA Power Handling (RMS) 65 W Recommended Amplifier Requirements 20 65 W Drive Unit Complement 6 1 2 MMP II cone bass driver 1 C CAM pivoting Gold Dome tweeter Adjustment Controls HF Level Switch ( 3 dB 0 dB 3 dB) Overall Diameter (Including Grille) 250 mm (913 16 ) Overall Depth (Including Grille) 120 mm (43 4 ) Mounting Depth 116 mm (49 16 ) Cut Out Hole Diameter 211 mm (81 4 ) Optional Square Grille Outer Dimensions 249 x 249 mm (9 3 16 ) Fixing Type 3 position Tri Grip dog fixings Construction Material Mineral filled ABS, RoHS compliant Weight 1.92 kg (4 lb 4 oz) Pre Construction Bracket CB6 Pre Construction Bracket (Purple) Back Box CCBOX R CMBOX R Sold As Single Unit
AV Parts Master
The Rawplug Spring Toggle Heavyweight Plasterboard Fixings are a set of 6 round-headed wall plugs, each measuring 50mm in length. Designed for heavy-duty use, these fixings are suitable for securely attaching items to plasterboard walls. As a trusted brand in the DIY materials industry, Rawlplug ensures quality and reliability in their products. Ideal for various home improvement projects, these fixings offer a convenient and strong solution for fastening items in place. Free postage makes them even more appealing for customers looking to get started on their next DIY task.
eBay
DIY Sculpture Craft Carving Tool Universal Jaw Bench Clamp Mini Drill Press Table Vise Fixing Small Parts Jewelry Watch
Aliexpress UK
DESCRIPTION AND FUNCTIONSThis wall mounted speaker system is suitable for the mounting either side of an interactive whiteboard in a classroom environment.Key Features 40 Watt amplifier with two audio inputs The systems has secure wall fixings and the steel mesh grills as a added protection in the classroom Inputs are included for PC and DVD or VCR The system is supplied with all cables and speaker connections RoHS compliance, CE and REACH approvalBasic Features The wall mounted speaker system is supplied with wall fixing brackets and screws plus cables needed to connect the speaker to a PC, phone, Tablet, DVD player etc. The power on off, volume button is positioned on the side panel of the active speaker The remote controller can be used to power on and off speakers within distance of 5m. It can be also used to adjust the speaker sound volume and mute the speakers.Active speaker connectionsTwo RCA female sockets are provided at the rear of the active speaker for PC DVD audioInput to the amplifierThe RCA output socket on the amplifier rear panel is for the connection the passiveSpeakerA 2m euro mains lead and UK adapter
AV Parts Master
eBay
Woodworking Bench Vise Hard Wood Vise Kit with G Type Fixing Clips Wood Desktop Work Table for Garage Studios Processing Wood
Aliexpress UK
GenuineB&Q spring toggle fixings suitable for use inhollow walls, plasterboard and overhead fixing applications. Application Hollow walls, plasterboard & overhead fixings. B&Q Spring Toggles – M5 x 80mm.
eBay
Universal Flat Screen Wall Mount with Tilt BT8431 For Medium Large Screens Designed for screens up to 50 (127cm) 35kg (77lbs) Fits screens with VESA and non VESA mounting patterns Simple tilt adjustment 18 Mounts screen only 80mm (3.1 ) from wall Suitable for concrete brick or up to 16 stud walls Simple hook on installation with all mounting hardware included Screen Size: up to 50 Max Weight: 35kg (77lbs) Dist. From Wall: 80mm (3.1 ) Max. Dist. between Fixings: H: 465mm (18.3 ) V: 400mm (15.7 ) VESA Compatibility:75 x 75, 100 x 100, 200 x 100, 200 x 200, 300 x 200, 300 x 300, 400 x 200, 400 x 300, 400 x 400 Tilt: 18 Colours Available: Black Community Design Number: 001713280 0035
AV Parts Master
BL1830 Lithium-ion Battery Box Nesting 10 Core Lithium Battery Combination Fixing Bracket For Makita 18V BL1860 Shell Housings
Aliexpress UK
New heavy duty toggle anchor for use in hollow materials, drywall, plasterboard, concrete block, etc. Unlike other traditional drywall anchor, this new model can fit materials in various thicknesses.
eBay
Universal Flat Screen Wall Mount with Tilt BT8432 For Extra Large Screens Designed for flat screens up to 65 (165cm) 70kg (154lbs) Fits screens with VESA and non VESA mounting patterns Simple tilt adjustment 15 Mounts screen only 80mm (3.1 ) from wall Suitable for concrete brick or up to 32 stud walls Simple hook on installation with all mounting hardware included 35kg (77lbs) when pole mounted Screen Size: up to 65 (165cm) Max. Weight: 70kg (154lbs) or 35kg (77lbs) when pole mounted Dist from Wall: 80mm (3.1 ) Max Dist between Fixings: H: 825mm (32.5 ) V: 500mm (19.7 ) VESA Compatibility:75 x 75, 100 x 100, 200 x 100, 200 x 200, 300 x 200,300 x 300, 400 x 400, 600 x 400, 800 x 400 Colours Available: Black Community Design Number: 001713280 0036
AV Parts Master
Self Adhesive Magnetic Tape Cuttable Rubber Magnetic Strip for Fridge Wall DIY Photo Poster Fixing Tape Home Office Storage Tool
Aliexpress UK