When you want to be able to write on your whiteboard and project this is the product you must have.It is designed with the same surface film we have used in our Interactive Whiteboard manufacture which will give you a safe image. It is accepted practice that you must not go far over 2000 lumens on an interactive Whiteboard surface (which is what we use for this board) otherwise you can face claims for eye damage through light bounceback. This product is 1.8M by 1.2m Alumium framed with plastic end caps. The surface is coated with the same USA sourced material that we have used for years in manufacturing Interactive Products. The image produced is crisp and clear with hardly any hot spots.
AV Parts Master
Side Cistern Entry. Adjustable Arm - 6 to 9". 1 Year Warranty.
eBay
When you want to be able to write on your whiteboard and project this is the product you must have.It is designed with the same surface film we have used in our Interactive Whiteboard manufacture which will give you a safe image. It is accepted practice that you must not go far over 2000 lumens on an interactive Whiteboard surface (which is what we use for this board) otherwise you can face claims for eye damage through light bounce back This product is 2M by 1.2m Aluminum framed with plastic end caps. The surface is coated with the same USA sourced material that we have used for years in manufacturing Interactive Products. The image produced is crisp and clear with hardly any hot spots.
AV Parts Master
All bathroom suites need a toilet, however when space is tight it can be hard to find the right design that meets all the right requirements. The Ceramica Arles Corner Toilet and Soft Close Seat ticks all of the boxes when it comes to style, functionality and practicality, making it perfect for any bathroom, especially for those who love modern designs but are unfortunately stuck with a space restrictive bathroom. The reason this particular toilet is great for smaller bathroom is it's ability to be installed in a corner due to its uniquely shaped cistern. This allows for more leg room and more floor space in general, allowing more space to easily organise your bathroom. Not only will you be saving space with this toilet, but you'll be saving water too! The handy dual flush push button.
eBay
RA Media Mate Monitor Riser XL.Our XL Single Lift Electric Height Adjustable Riser with floor fixing points designed to direct the weight of the screen safely and directly to the floor rather than rely on the wall itself as many walls cannot support the overall weight of a heavy Touch Screen and Riser. Suitable for most Large Flat Screens and Interactive Touch Screens up to 98 inch diagonal and 120kg (maximum 800x600 VESA) from manufacturers including Clever Touch, Ctouch, Smart, Genee, Promethean, Benq, Samsung, LG and many more.Standard features include, Rigid Floor Mounting Plate (W 350mm x D 250mm) with Floor Anchor Bolts and matching Black Plastic Caps, Heavy Duty Wall Support Bracket, Wired Remote Control Handset, two accessory power sockets, 500mm of smooth and progressive lift action from lowest to highest screen positions.This riser also offers a choice of height settings for the VESA Mounting Plate to be fixed at to enable the screen to be positioned lower when being used by children or smaller users or higher when used by adults.For installations when the floor cannot be drilled for fixing due to Underfloor Heating, Asbestos or other reasons an additional Wall Support Bracket must be used to fix the riser to a supportive wall at two points, high and low. Please see RA MM Monitor WS Bracket.A full bolt kit for fixing the screen to the riser is included.Screen Height Adjustment Settings.With the VESA Mount fixed in its LOWEST position on the riser, the CENTRE of the screen will be approximately 900mm from floor level when the riser is in its LOWEST position.When in its HIGHEST position, the CENTRE of the screen will be approximately 1400mm from floor level.With the VESA Mount fixed in its HIGHER position on the riser, the CENTRE of the screen will be approximately 1020mm from floor level when the riser is in its LOWEST position.When in its HIGHEST position, the CENTRE of the screen will be approximately 1520mm from floor level.Three year RTB Warranty.
AV Parts Master
Add a touch of elegance to your bathroom with the Housler Brush Gold Pneumatic Push button for concealed Cistern. This high-quality button is designed to provide a comfortable and efficient flush experience. It is made from durable plastic material and features a concealed cistern design, making it perfect for any modern bathroom. The Housler Brush Gold Pneumatic Push button for concealed Cistern is suitable for use in toilets and is easy to instal. It comes with dual-flush capabilities and a push-button design that is easy to use. This product is perfect for anyone looking to upgrade their bathroom's flush system.
eBay
The design of the PARAPROJECT CASE is poles apart from the standard massive appearance of other transport cases. It combines stylish elegance, a fresher design and user friendliness with low weight and built in technology.Number of iPad's16Suitable for:iPad 1, 2, 3, 4 and iPad miniOther tablets:Yes (product 208440 179)Size (WxDxH):710x395x477mmWeight:11.5 kg excluding equipment30 Pin USB cables:Yes (30 Pin or Lightning)Lightning USB cables:Yes (30 Pin or Lightning)Synchronization function:Yes, only wirelessCharging function:Yes, even in closed briefcaseLED status:NoPower:Yes, includedExtra power supply:YesSpace for AirPort Extreme Express:YesMaterial:ABS PMMA plastic and aluminumLockable:Yes, two combination locks with integrated twist lockVentilating:YesHandle:4 piece telescopic (1 m.)Handbrake:Yes, two wheelsWarranty:2 years fullMDM software:No, not includedOther:No separate power supplies necessary iPad
AV Parts Master
WRAS Approved. Supplied with siphon back nut, flush pipe coupling nut, siphon seal and low level flush pipe seal. Three part siphon with quick release coupling nut for easy maintenance. tab content here.
eBay
RA Studfix V2 This complete installation solution is designed to enable Flat Screens or Touch Screens to be fixed to a wooden stud partition wall and direct the weight of the screen directly to the floor. The kit includes two upright supporting box section legs which are fixed to the existing upright wooden studs inside the wall with the Wall Mounting Plate and Floor Plate included in the kit. This creates a rigid, safe and strong fixed mounting frame for the Flat Screen Mount (included) to fix onto and position the screen at a selection of height settings. All fixings, bolts, coach screws and plastic caps are included for a neat and tidy installation. The two Upright Supporting Legs are hollow box section design and allow connection cables to and from the screen to be routed through them. Cable exit entry slots are positioned on the inner sides of each leg to enable surface mounted cable trunking to route cables away to a connection panel if required (not included). Maximum CENTRE POINT of screen height from floor level approximately 1365mm. Minimum CENTRE POINT of screen height from floor level approximately 1110mm. Suitable for any size screen with a maximum VESA mount configuration of 800 x 600 and up to a recommended maximum weight of 80kg. Full fitting instructions included with each kit and finished in durable White or Black powder coat finish.
AV Parts Master
SIZE (centre to centre) 190mm high (50mm) Length 300mm (40mm ).
eBay
Peerless AV TRVT561 TruVue Height Adjustable Mobile Screen Trolley Ideally suited for 32 75 LCD and Plasma screens. The TruVue TRVT561 provides a sleek tidy mobile solution for 32 75 displays. Complete with 2 heavy duty poles to display the screen at a maximum height of 1530mm (60.2 ). It s unique and convenient Display height adjustment is complimented by spring plunges allowing the display to be vertically positioned easily. Complete with cable management, 4 heavy duty braked caster wheels, and a spacious shelf for AV components. Features Typical Screen Sizes: 32 75 Solution Type: Universal Orientation: Landscape Colour: Black Powder Coat Finish Maximum weight loading 45.5 Kgs Height Adjustable Max: 1530mm (60.2 ) Universal VESA 200x200 up to 600x400mm Plastic component shelf for AV equipment Internal Cable Management; hide cables to provide a tidy look Includes height adjustable VC Shelf
AV Parts Master
Collection: Concealed Cistern, Fill Valve, Flush Valve. Flush Type: Dual- Flush. 180 degree rotation float. Water-Saving integrated flush valve. Entry Point(s): Side, Bottom. Extra long 570mm flexible cable.
eBay
RA Studfix V1 NM (Nursery School Model with lower screen height positions) A complete Floor to Wall Mounting System suitable for Flat Screens with a maximum recommended weight of 65kg and maximum VESA mount configuration of 600x400, designed for use in Nursery and Primary School environments where a lower screen position is required. This Nursery Model allows the bottom of an average sized 65 inch screen to be positioned approximately 25cm from Floor Level. A complete installation solution designed to enable Flat Screens or Touch Screens to be fixed to a wooden stud partition wall or solid wall and direct the weight of the screen directly to the floor. Ideal for installations when the wall itself cannot support the weight of a heavy screen. Suitable for Smart, Clevertouch, Ctouch, Promethean ATP, Philips, Samsung, LG, Panasonic, BENQ, iTouch, Vividtouch, Hitachi, Iiyama, iBoard, Genee Screens and many more................ The system includes two upright supporting box section legs which are fixed to the existing upright wooden studs inside the wall with a Wall Mounting Plate and Floor Plate included in the kit. This creates a rigid, safe and strong fixed mounting frame for the Flat Screen Mount (included) to fix onto and position the screen at a selection of height settings. All fixings, bolts, coach screws and plastic caps are included for a very neat and tidy installation. The two Upright Supporting Legs are hollow box section design and allow all connection cables to and from the screen to be routed through them. Cable exit entry slots are positioned on the inner sides of each leg to enable surface mounted cable trunking to route cables away to a connection panel if required (not included). Maximum CENTRE POINT of screen from floor level is approximately 1060mm. Minimum CENTRE POINT of screen from floor level is approximately 760mm. The Wall Mounting Plate can be fixed to the wall in a LOWER or HIGHER position to avoid any dado rails or network trunking on the walls surface. In the LOWEST position the centre of the plate will be 650mm from floor level and in the HIGHEST position the plate will be 980mm from floor level. The Wall Mounting Plate itself is 120mm high and has four mounting slots 400mm apart. Upright supporting legs are 500mm apart (centre to centre). Finished in durable White or Black powder coat finish. An Optional Extra Media Shelf is available for this system (RA Studfix Shelf) which can be positioned under the screen at a selection of height settings.
AV Parts Master
Struggling to find a suitable close coupled toilet for your ensuite or cloakroom suite?. The last thing you want is to be hit by the door when it opens through lack of space! If this dilemma sounds familiar then you've got to invest in a corner toilet.
eBay
TC3 AMP 50w Digital Amplifier Extremely small 2 x 25 w (RMS) at 8 ohms Digital Amp 2 x Stereo inputs (Input 1 duplicated on front and rear) IR Remote control included By using latest low impedance digital amplifier chip technology the new Techconnect Amp module outputs a massive 2 x 25 watts RMS (at 8 ohms) but fits into the space of a Techconnect module. Front Panel InputTwo Inputs are wired into the rear with removable phoenix connectors, but Input 1 is also duplicated on the front panel with a minijack socket for convenience. This half normalled input disconnects the rear terminal while in use. D Class AmplifierDigital amplifiers use no power unless they are amplifying program, so even on at full volume; unless it is receiving input it is effectively off. Digital amplifiers also have the advantage of running cold so a bulky heatsink is not necessary Power Four SpeakersDon t let size deceive you: the Techconnect Amp can drive into a 4 ohm load allowing you to power up to four 8 ohm speakers (or two 4 ohm speakers). Preset MemoryBy default when power is activated the Techconnect Amp turns on and resumes the most recent settings. For hospitality applications it can be set to return to a preset input and level whenever it is powered on for example in hotel guest rooms. Tactile DialA simple clear control interface makes the product easy to use long press on the dial to power on and off. Short press to change input. Remote ControlA remote control is included and IR receivers are positioned on the front and rear for integration with a control system such as the Techconnect Control. Note: there is no tone control with this amplifier. Vision s spare remote controls have tone buttons but they do not work with this product. Easy to Install and UninstallA robust module that is easy to install or remove and disconnect from the front. Removable phoenix connectors allow non technical end users to uninstall it very easily if required. Cables IncludedSpeaker cable is included plus short input cables are included for connection to the rear of adjacent input modules on the Techconnect. SecureIdeal when you don t have furniture to sit an amplifier on, and because it is mounted to the wall it is much less obvious as a target for theft. Close at HandCan be positioned anywhere in the room making it perfect for training rooms, boardrooms, and classrooms. Integrated Techconnect FamilyIncluded is a single gang backbox and surround, or alternatively you can mount it in a double gang surround with other Techconnect modules. Specifications AMPLIFIER MODULE DIMENSIONS: 42 x 64 x 36mm 1.65 x 2.8 x 1.57 BACKBOX DIMENSIONS: 86 x 86 x 45mm 3.39 x 3.39 x 1.77 SURROUND DIMENSIONS: 86 x 86 x 8mm 3.39 x 3.39 x 0.31 CARTON DIMENSIONS: 240 x 205 x 63mm 9.45 x 8.07 x 2.48 AMPLIFIER WEIGHT: 63 grams 0.14 lb PACKAGED WEIGHT: 1.1kg 2.4 lb COLOUR: White INPUTS: 2 x Stereo inputs via removable phoenix connectors TECHNICAL DETAILS:2 x 25w 8 ohmsTotal Harmonic Distortion: less than or equal to 1 (20Hz 22kHz)Frequency response (line in): 80Hz 22kHz( 2dB)Signal to noise ratio (line in): more than or equal to 98dB (A weighted)Rating input level impedance: Line in 500mV 50k Power consumption (rating condition): less than or equal to 50W ACCESSORIES INCLUDED:1 x Single gang Backbox1 x Single gang Surround2 x 150mm (5.9 ) input cables2 x Unshielded Speaker cable 5m (16.4 ft) long1 x Remote Control with batteries POWER SUPPLY: 100 240v 50 60Hz AC External Power Supply 15 volt 4 amp.Laptop style transformer. Includes 4 x 0.5m (4 x 1.6 ft) figure 8 power cables: UK EU US AU. DC tail length: 4m (13.1 ft).Transformer dimensions: 108 x 50 x 33mm 4.1 x 2 x 1.3 SP 1800 Pair 3 Way Wall Loudspeakers 5.25 Woofer 50w loudspeakersWall brackets included with 60 range of tilt adjustmentWhite, sold in pairs Vision s SP 1800 professional wall mounted loudspeakers are super easy to install, look beautiful, and produce rich and powerful sound. They are 240mm tall and use a 5.25 inch woofer the most popular size for classroom, meeting room, and boardroom applications. Three WayThese loudspeakers use three drivers; a woofer, a squawker, and a tweeter. Asking a driver to produce a wide range of frequencies is always a compromise, so dividing the sonic range into three means each driver has a narrower range of frequencies to produce, resulting in less distortion and clearer sound. Bass ReflexA bass reflex port allows greater excursion of the woofer, allowing the woofer to produce lower frequencies, and the phase delayed movement of air from behind the woofer to the front reinforces the bass even more. Rugged GrilleA metal grille protects the drivers from physical interference. Tough FinishConstructed with tough ABS plastic, the finish withstands the rigors of the professional use. Pro AV ApplicationsIn small to medium presentation environments a wide dispersion is generally more important than microphone feedback management, so no horns are used. Horizontal C bracketThe adjustable brackets allow the installer to easily angle up 30 or down 30 . Or leave the brackets off and use as shelf speakers. Note: these are passive loudspeakers there is no amplifier built in so they need to be used with an external amplifier. Specifications PRODUCT DIMENSIONS: 240 x 178 x 193 mm 9.45 x 7 x 7.6 (tall x wide x deep for each speaker) PACKAGED DIMENSIONS: 465 x 205 x 270 mm 18.3 x 8.1 x 10.63 PRODUCT WEIGHT: 4.2 kg 9.26 lbs (per pair) PACKAGED WEIGHT: 4.67 kg 10.23 lbs (per pair) CONSTRUCTION MATERIAL: ABS COLOUR: White TECHNICAL DETAILS:Power Handling: 50 watts (RMS)Woofer: 5.25 Squawker: 1 Tweeter: 0.5 Input Terminals: Binding postOutput Impedance: 8 ohmsSensitivity: 89dB (1w 1m)Frequency response: 80Hz 20kHz ACCESSORIES INCLUDED:2 x Wall brackets WARRANTY 3 year return to base COMPLIANCE: RoHS, WEEE, CE EMC, FCC, RCM POC, RCM SDOC
AV Parts Master
Adapt to Cistern Lid Holes including 40mm, 50mm & 60mm. Modern universal dual flush push button which can be adapted to suit a number of different size cistern holes including 40mm, 50mm, and 60mm. The button is suitable for all the Viva SKYLO cable type flush valve range.
eBay