Features 1This converter is used for connecting MDB coin receivers, bill receivers and card readers. 2You can not only just use the RS232 port of the computer but you can also use for Android motherboard or any other motherboard with RS232 or USB port. 3If you only have a USB port, you can use the additional USB to RS232 transfer case to create a virtual COM port on your PC or Android board. 4Supports MDB, coin receiver, bill receiver, cash interface (10H and 60H) and USD interface (40H). 5Allows the PC to control the coin acceptor, the change dispenser, the smart card reader, the magnetic card, the credit card reader, the bill acceptor and the bill verification. 6Complies with all NAMA MDB specifications and is compatible with any vending equipment that complies with MDB. The hardware interface comes with cables, user guide and user agreement. 7A single MDB to RS232 converter can connect up to eight (8) MDB compatible devices. 8The interface adapter is designed to convert the MDB protocol of the vending machine to the RS232 serial protocol. 9The adapter is used as a slave of the main control system. The main device can be any control system that supports RS232 serial communication, such as a PC. 10This adapter is designed to convert MDB bill acceptor (BA) and MDB coin changer protocols to RS232 serial protocol. IU is used as a slave of the master control system. Specification Conditon: 100% Brand New Item Type: MDB to RS232 Converter Material: ABS Plastic Color: As Pictures Shown Start Bit: 1 Data Bits: 8 Stop Bit: 1 Between Bytes: 1 Ms Response (Maximum): 50 Ms Master Polling Time: 150-300 Milliseconds IU Waits for the Main Polling Time Before Rejecting BA and coin changer (Maximum): 3 Seconds Minimum Voltage: 20V DC Nominal Voltage: 24-34V DC (or 24-30V AC) Maximum Voltage: 39V DC Idle Current Consumption: <0.05A Cable: Standard Computer Serial Cable, Standard MDB Cable Package List 1 x MDB to RS232 Converter 1 x Manual
Fruugo United Kingdom
Diagnoza VAG-COM VCDS Premium Interfata si Soft Inclus
Fruugo United Kingdom
All adapters have been fully tested: Aging Test, Material Test,Over Voltage Test,Over Temperature Test,Safety Test,High efficiency low energy consumption Fit model:HC3400 HC3410 HC3420 HC3422 HC3426 HC5410 HC5440 HC5442 HC5446 HC5447 HC5450 HC7452 Colour:black Material:plastic Package Contents: 1 * Hair clipper Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
Disposable Film Camera 35mm Manual Fool Optical Camera Custom Logo Film CameraOur products are made with the highest quality materials and are designed to provide you with the best possible user experience. We strive to ship out all orders within three days of purchase, and the estimated delivery time is 8-15 days.When shopping, please pay attention to the size and dimensions of the product to ensure that it meets your needs. In the title and , we have provided detailed information about the product, including its features and specificationsWe want you to be completely satisfied with your purchase, so if you have any questions or concerns, please don''''''''t hesitate to contact us. We are here to help and will do our best to assist you.Thank you for choosing our product. We hope you enjoy it",
Fruugo United Kingdom
Condition: Brand NewName: Hair Clipper Shaver Trimmer CombAdjustable: 3-21mmCompatible Models:For QC5510 QC5530 QC5550 QC5560 QC5570 QC5580Colour: grayMaterial: plasticPackage Contents:1 * Hair Clipper CombOnly the above package content, other products are not included.Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 3-21cm.
Fruugo United Kingdom
Description: 1. Comaptible with for MACH3 software.Support for windows XP, WIN7, WIN8, WIN10, support tablet computers, as well as 64-bit systems. 2. Provide PWM output (5V level) isolated by optocoupler to control other PWM controlled spindle speed controllers. Provide 4 output ports (5V level), which can be connected to a relay module with optocoupler to control water cooling, spray, etc. 3. External wide voltage input, 12-24V, and anti-reverse connection function. 4. All input signals are isolated by optical coupling, which can be connected to emergency stop, tool setting, limit, return to zero, etc., to computer safety. 5. It provides 0-10V analog voltage output isolated by optocoupler, and can control the frequency converter input by 0-10V analog voltage to control the spindle speed. It can be connected to a stepping motor driver with a common anode or common cathode input, a level of 5V, and an optocoupler input. At the same time, a 5-axis interface cable socket (HX2.54) is provided, which is convenient for connecting the stepper motor driver. Set inverter: 1. Set the inverter to external terminal start. 2. Set the frequency control mode of the inverter to analog (0-10V) input control. Quickly set up the inverter: 1. The inverter does not need to be connected to the interface board first. 2. Short-circuit the FWD and COM of the inverter, and short-circuit the 10V and VI of the inverter. Connect the spindle. (Of course, it is better to connect the potentiometer to the 10V, VI and GND of the inverter according to the figure). 3. Power on, if the inverter can run at the maximum speed and the spindle rotates normally, it basically means that the setting is correct. (If a potentiometer is used, the speed is adjustable). Caution! Please mind the power polarity and drivers direction. Please don't put the drivers or motors on/offwhen power on. Please disconnect all motors when adjust driver current. Material: plastic colour: As Shown Package Contents: 1 x V3.25 5-axis control card 1 x USB cable 1 x CD 1 x Tool setter Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
(English was sent by defaultly) English 22.3+German 21.9 About Update: Software can't be updated Compatible Cars: Support cars for for for seat for Please note that this is not a true HEX-V2 interface, it is just a restyled case, that's why the name. Support for newer 2017 models Compatibility with the latest Models Long Coding Assist (LCode) updated Special Functions for (7P) EPB Compatibility Revised and expanded Label Files. 1. Fully compatible with , , Seat and models through the current model year, including models using a direct CAN connection for diagnostics. 2. Can use the new 7-Digit PIN/ codes to match new keys in all immobilizer equipped //Seat/ models. 3. Can access all control modules which require proprietary modes running the KWP-2000 protocols (2001+ Teves .60 ABS, numerous 2002+ modules), KWP6000 (CAN) and/or KWP7000 (UDS). 4. Completely revised and expanded ROD () Data. Including coverage for all the latest models of cars such as the new 4G-chassis A6. The structure of our ROD data has also been revised to eliminate much redundancy and keep the installer size reasonable. 5. Support for new UDS addresses required for compatibility with new systems found in latest car models.Auto-Scans now show sub-system label file names. 6. EDC15-16 Mileage reading now includes support for some EDC15 V6 TDI ECUs. 7. Revised and expanded Label Files More than 350 new or revised files since the last dataset.New USB Drivers. Colour:black Material:plastic Package Contents: 1 x for 22.3 cable 1 x CD Software Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
Portable electronic insect repellent, no chemical stimulation, with physical principles, electronic simulation to emit ultrasonic waves to achieve the effect of repelling ticks, fleas and lice.Wide coverage, within 3-10 meters can achieve effective prevention, provide comprehensive and continuous protection, keep your dog happy and healthy.Environmentally friendly, no chemicals or fragrances, safe compatible cats and dogs.The flashing light can be switched to night mode to reduce the risk of getting lost at night.Product details: The product has a built-in LED light, a USB cable inside and is available in white or black.
Fruugo United Kingdom