Net Capacity - Fridge 235 Litres/Freezer 120 Litres Total No Frost Electronic temperature control Reversible door Product Dimensions (HxWxD) (mm) - 1850 x 595 x 667
Marks Electrical
Nürnberg ca. 1850. Original Stahlstich-Portrait von aus dem 19. Jh. -- Blatt-Maße: ca. 10,5 x 7,5 cm. -- gut erhalten. || Original steel engraved portrait from the 19th century. -- in good condition. || Dies ist ein Original! - Kein Nachdruck! - Keine Kopie! -- This is an original! - No copy! - No reprint! Bestell-Nr: 216318 .
eBay
NEW 35mm 35 mm f/1.4 Lens Zoom Rubber Grip Ring For Sigma ART 50mm F1.4 DG HSM 18-200mm 18-200 18-250mm 18-250 18-50mm 18-50
Aliexpress UK
4BN NEX 62cm Max straight cutting length - 620mm Max diagonal cutting length - 427x427mm Weight - 11.8kg Series 4 “Nex” Pushing Incision The change from scoring to breaking position is achieved by a small vertical movement of the hand-grip. Featuring a large tile support table and swivelling measurement bar which supports the tile, it can rotate 45° in both directions and is pivoted at the centre of the cutting line, allowing the real measurement of the piece to be cut to be obtained. A 45° second measurement scale gives the length of the diagonal and the rapid positioning button makes it easier to set to standard angles far quicker. Pushing away from the lateral stop measurement bar rather than pushing to it, allows a much stronger scribe mark on the material, which in turn allows particularly thick or difficult materials to be easily cut, with the added advantage of the lateral stop measurement bar being conveniently close to the operator. Precision, practical use and low weight are the main characteristics of Sigma tile cutters. Suitable for cutting all types of commercially available tiles. Made from high-resistance aluminium alloy and steel for great rigidity. The special shape of the grip allows tiles to be cut at any point. Plastic fittings on the base of the breaker, to prevent marks on the material being cut. Supplied with a scoring wheel that is a long life and bearing mounted made from tungsten carbide. The tile is snapped by simply pressing down with the breaking feet near the edge of the tile. Series 4 Features Ergonomic Handles - Ergonomic handles with full ball bearing slide. Machined Guides - Extremely robust sliding guides for a perfectly straight cut over time. For all thicknesses - Cutting all thicknesses without adjustment. Robust Structure - Aluminium structure, obtained from a single casting for maximum strength and lightness. Metric Bar - The metric bar is pivoted in the centre of the cutting line, swivelling +45° 0° -45° and always close to the operator. Cutting angle adjustment button - Adjustable button for quick positioning of the metric bar at the most commonly used angles Diagonal measurement patented system - The metric ruler allows measurement of the side and diagonal. Cutting line lighting - Provision for mounting Positioning Laser Reduced dimension - Space is reduced during transport by positioning the metric bar along the base. Sprung supports - The sprung supports can be opened freely for perfect support of large tiles. Scoring wheel compartment - Container for scoring wheel replacement. Steel pin – Metric bar pivoted in centre on steel pin Front measurement - Allows measuring on both right and left (410 - 0 - 410 mm) for narrow and long tile cuts. Sigma Series 4 4BN NEX Tile Cutter 62cm
Tile Kingdom - Indoor and outdoor tiles
Auto Focus and zoom working fine. Lens in very good condition.
eBay
4DN NEX 95cm Max straight cutting length - 950mm Max diagonal cutting length - 670x670mm Weight - 13.5kg Series 4 “Nex” Pushing Incision The change from scoring to breaking position is achieved by a small vertical movement of the hand-grip. Featuring a large tile support table and swivelling measurement bar which supports the tile, it can rotate 45° in both directions and is pivoted at the centre of the cutting line, allowing the real measurement of the piece to be cut to be obtained. A 45° second measurement scale gives the length of the diagonal and the rapid positioning button makes it easier to set to standard angles far quicker. Pushing away from the lateral stop measurement bar rather than pushing to it, allows a much stronger scribe mark on the material, which in turn allows particularly thick or difficult materials to be easily cut, with the added advantage of the lateral stop measurement bar being conveniently close to the operator. Precision, practical use and low weight are the main characteristics of Sigma tile cutters. Suitable for cutting all types of commercially available tiles. Made from high-resistance aluminium alloy and steel for great rigidity. The special shape of the grip allows tiles to be cut at any point. Plastic fittings on the base of the breaker, to prevent marks on the material being cut. Supplied with a scoring wheel that is a long life and bearing mounted made from tungsten carbide. The tile is snapped by simply pressing down with the breaking feet near the edge of the tile. Series 4 Features Ergonomic Handles - Ergonomic handles with full ball bearing slide. Machined Guides - Extremely robust sliding guides for a perfectly straight cut over time. For all thicknesses - Cutting all thicknesses without adjustment. Robust Structure - Aluminium structure, obtained from a single casting for maximum strength and lightness. Metric Bar - The metric bar is pivoted in the centre of the cutting line, swivelling +45° 0° -45° and always close to the operator. Cutting angle adjustment button - Adjustable button for quick positioning of the metric bar at the most commonly used angles Diagonal measurement patented system - The metric ruler allows measurement of the side and diagonal. Cutting line lighting - Provision for mounting Positioning Laser Reduced dimension - Space is reduced during transport by positioning the metric bar along the base. Sprung supports - The sprung supports can be opened freely for perfect support of large tiles. Scoring wheel compartment - Container for scoring wheel replacement. Steel pin – Metric bar pivoted in centre on steel pin Front measurement - Allows measuring on both right and left (410 - 0 - 410 mm) for narrow and long tile cuts. Sigma Series 4 4DN NEX Tile Cutter 95cm
Tile Kingdom - Indoor and outdoor tiles
Refer to photos.
eBay
4CU UP 84cm Max straight cutting length - 840mm Max diagonal cutting length - 594x594mm Weight - 12.3kg Series 4 “UP” Pulling Incision The "UP" handle on this machine is designed for pulling incisions that are quick and easy for cutting tiles. An ergonomically shaped handle specific for pulling incision. The scoring wheel diameter of 12mm is always visible from the operator's side. It also features a CNC milled wheel holder and an anti-friction metal shell to eliminate friction and lateral wear on the scoring wheel. Scoring wheel is also available in TIN coated version. (Art.14UT) The sliding carriage is wear-free, thanks to 3 double-row ball bearings that guarantee long-term precision. Automatic steel compensator for adjusting the slide preload on the rail. There is also an automatic system that holds the handle up to facilitate the insertion of the tile. A wide splitting foot of 100mm. Interchangeable anti-mark protection protects the basement from impact during the scoring. The handle is mounted to the slide carriage with two thrust ball bearings for maximum precision. Most spare parts available. Series 4 Features Ergonomic Handles - Ergonomic handles with full ball bearing slide. Machined Guides - Extremely robust sliding guides for a perfectly straight cut over time. For all thicknesses - Cutting all thicknesses without adjustment. Robust Structure - Aluminium structure, obtained from a single casting for maximum strength and lightness. Metric Bar - The metric bar is pivoted in the centre of the cutting line, swivelling +45° 0° -45° and always close to the operator. Cutting angle adjustment button - Adjustable button for quick positioning of the metric bar at the most commonly used angles Diagonal measurement patented system - The metric ruler allows measurement of the side and diagonal. Cutting line lighting - Provision for mounting Positioning Laser Reduced dimension - Space is reduced during transport by positioning the metric bar along the base. Sprung supports - The sprung supports can be opened freely for perfect support of large tiles. Scoring wheel compartment - Container for scoring wheel replacement. Steel pin – Metric bar pivoted in centre on steel pin Front measurement - Allows measuring on both right and left (410 - 0 - 410 mm) for narrow and long tile cuts. Sigma Series 4 4CU UP Tile Cutter 84cm
Tile Kingdom - Indoor and outdoor tiles
This is an original quality part manufactured by Febi Bilstein. FOR MITSUBISHI SIGMA. Fitting Position:Front Axle. Item Thickness:15,7 mm. Vehicle compatibility. Required Quantity:1. Width [mm]:58,4.
eBay
4DU UP 103cm Max straight cutting length - 1030mm Max diagonal cutting length - 728x728mm Weight - 14.5kg Series 4 “UP” Pulling Incision The "UP" handle on this machine is designed for pulling incisions that are quick and easy for cutting tiles. An ergonomically shaped handle specific for pulling incision. The scoring wheel diameter of 12mm is always visible from the operator's side. It also features a CNC milled wheel holder and an anti-friction metal shell to eliminate friction and lateral wear on the scoring wheel. Scoring wheel is also available in TIN coated version. (Art.14UT) The sliding carriage is wear-free, thanks to 3 double-row ball bearings that guarantee long-term precision. Automatic steel compensator for adjusting the slide preload on the rail. There is also an automatic system that holds the handle up to facilitate the insertion of the tile. A wide splitting foot of 100mm. Interchangeable anti-mark protection protects the basement from impact during the scoring. The handle is mounted to the slide carriage with two thrust ball bearings for maximum precision. Most spare parts available. Series 4 Features Ergonomic Handles - Ergonomic handles with full ball bearing slide. Machined Guides - Extremely robust sliding guides for a perfectly straight cut over time. For all thicknesses - Cutting all thicknesses without adjustment. Robust Structure - Aluminium structure, obtained from a single casting for maximum strength and lightness. Metric Bar - The metric bar is pivoted in the centre of the cutting line, swivelling +45° 0° -45° and always close to the operator. Cutting angle adjustment button - Adjustable button for quick positioning of the metric bar at the most commonly used angles Diagonal measurement patented system - The metric ruler allows measurement of the side and diagonal. Cutting line lighting - Provision for mounting Positioning Laser Reduced dimension - Space is reduced during transport by positioning the metric bar along the base. Sprung supports - The sprung supports can be opened freely for perfect support of large tiles. Scoring wheel compartment - Container for scoring wheel replacement. Steel pin – Metric bar pivoted in centre on steel pin Front measurement - Allows measuring on both right and left (410 - 0 - 410 mm) for narrow and long tile cuts. Sigma Series 4 4DU UP Tile Cutter 103cm
Tile Kingdom - Indoor and outdoor tiles
FOR MITSUBISHI SIGMA. Fitting Position:Front Axle. Thickness 1:15,4. Vehicle compatibility. This is an original quality part manufactured by Blue Print.
eBay
4EN NEX 125cm Max straight cutting length - 1250mm Max diagonal cutting length - 880x880mm Weight - 30kg Series 4 “Nex” Pushing Incision The change from scoring to breaking position is achieved by a small vertical movement of the hand-grip. Featuring a large tile support table and swivelling measurement bar which supports the tile, it can rotate 45° in both directions and is pivoted at the centre of the cutting line, allowing the real measurement of the piece to be cut to be obtained. A 45° second measurement scale gives the length of the diagonal and the rapid positioning button makes it easier to set to standard angles far quicker. Pushing away from the lateral stop measurement bar rather than pushing to it, allows a much stronger scribe mark on the material, which in turn allows particularly thick or difficult materials to be easily cut, with the added advantage of the lateral stop measurement bar being conveniently close to the operator. Precision, practical use and low weight are the main characteristics of Sigma tile cutters. Suitable for cutting all types of commercially available tiles. Made from high-resistance aluminium alloy and steel for great rigidity. The special shape of the grip allows tiles to be cut at any point. Plastic fittings on the base of the breaker, to prevent marks on the material being cut. Supplied with a scoring wheel that is a long life and bearing mounted made from tungsten carbide. The tile is snapped by simply pressing down with the breaking feet near the edge of the tile. Series 4 Features Ergonomic Handles - Ergonomic handles with full ball bearing slide. Machined Guides - Extremely robust sliding guides for a perfectly straight cut over time. For all thicknesses - Cutting all thicknesses without adjustment. Robust Structure - Aluminium structure, obtained from a single casting for maximum strength and lightness. Metric Bar - The metric bar is pivoted in the centre of the cutting line, swivelling +45° 0° -45° and always close to the operator. Cutting angle adjustment button - Adjustable button for quick positioning of the metric bar at the most commonly used angles Diagonal measurement patented system - The metric ruler allows measurement of the side and diagonal. Cutting line lighting - Provision for mounting Positioning Laser Reduced dimension - Space is reduced during transport by positioning the metric bar along the base. Sprung supports - The sprung supports can be opened freely for perfect support of large tiles. Scoring wheel compartment - Container for scoring wheel replacement. Steel pin – Metric bar pivoted in centre on steel pin Front measurement - Allows measuring on both right and left (410 - 0 - 410 mm) for narrow and long tile cuts. Sigma Series 4 4EN NEX Tile Cutter 125cm
Tile Kingdom - Indoor and outdoor tiles
The lens is in great condition fully working with no faults. The focusing ring is smooth and easy to operate. Front Lens Cap. Rear Lens Cap. If the custom is not paid the parcel might be destroyed.
eBay
Inspiration. Choose from our stunning range of large format wall and floor tiles. This range offers many distinctive and eye catching designs which will give your space a truly high end look. Available in both matt and polished finishes and rectified for precision installation. Inspiration Sigma Perla 60x120cm (box of 2): Greys Gloss Porcelain 60x120cm Wall and Floor
Tile Kingdom - Indoor and outdoor tiles
General Register of the Members of the Phi Kappa Sigma Fraternity (1850-2000) Philadelphia A.D. 2000 - Paperback SHIPS FAST!!! We ship daily and every order is provided with a tracking number for confirmation. Thanks for taking the time to view this listing. For more great items check out our Ebay store.
eBay
Maximum Capacity (Standard Wine Bottle) - 197 Full height freestanding wine cooler for true connoisseurs Generous capacity External temperature display with touch controls for easy access Product Dimensions (HxWxD) (mm) - 1850 x 595 x 595
Marks Electrical
FOR MITSUBISHI SIGMA. Width [mm]:40,8. Fitting Position:Rear Axle. Thickness 1:15,5. Vehicle compatibility. This is an original quality part manufactured by Blue Print.
eBay