Compatible: for Sundance-spas Hot Tub Spas Water cleaner System 2012+, for spas series J-200, J-300, J-400, J-LX 6472-841, 6472-857, 3LRK, 94-1552, UVL-3LRK-1 Compatible: Also known as part numbers: 6472-841, 6472-857, 3LRK, 94-1552, UVL-3LRK-1 Packing: You get 2 Bulb . For better performance, Suggest replace the bulb every year. Help to reduce reparing cost Easy to Install: The light bulb is installed in the hot tub, remove the screws, enclosure cover and gasket in place, slide the replacement bulb back inside the quartz tube! Notice: Backwards Compatible-Compatible with for older model Please note: the physical slightly color difference or difference, does not affect the use, please do not mind, thank you! Colour:As Shown Material:Glass Package Contents: 2 * Pool and Spa Bulb Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
Specification:Type: light curing composite resinShage: A1 A2 A3Net weight: 2.5gColor: as picture showPackage includes:1PC A1/A2/A3Features:1. Low polymerization shrinkage.2. High strength and polishability.3. Similar modulus of elasticity with dentine.4. Radioopaque and fluoride releasing Optimal polishability and high shade stability.5. Easy to mold.6. Easy to adhere to bracket for orthodontics.7. Simple and convenient to use.8. Used for all types of cavity preparations.Usage:1. Prepare cavities according to conventional requirements, remove decayed tissue, and clean cavities.2. Apply dental composite resin pre-treatment agent (etchant) to the tooth surface to be bonded, rinse and blow dry the bonding surface.3. Apply a uniform and thin layer of dental composite resin pre-treatment agent (adhesive) on the bonding surface, and illuminate with a dental light curing lamp for 20 seconds.4. After filling and carving with an appropriate amount of composite resin, the light intensity should not be less than 400mW/cm The light source is irradiated for 20 seconds to solidify. Curing depth 1.5mm. If the filling depth is large, the irradiation time can be appropriately extended or layered solidification filling can be carried out.5. Conduct trimming and polishing, and inspect with dental bite paper before trimming. It is recommended to use rubber polishing wheels and ultra-fine abrasive polishing strips.6. Recommended use of pulp protection and cushioning materials: calcium hydroxide (light cured or chemically cured) or other non oily cushioning materials. Do not use materials containing eugenol directly as a base.
Fruugo United Kingdom
Specification:Type: light curing composite resinShage: A1 A2 A3Net weight: 2.5gColor: as picture showPackage includes:1PC A1/A2/A3Features:1. Low polymerization shrinkage.2. High strength and polishability.3. Similar modulus of elasticity with dentine.4. Radioopaque and fluoride releasing Optimal polishability and high shade stability.5. Easy to mold.6. Easy to adhere to bracket for orthodontics.7. Simple and convenient to use.8. Used for all types of cavity preparations.Usage:1. Prepare cavities according to conventional requirements, remove decayed tissue, and clean cavities.2. Apply dental composite resin pre-treatment agent (etchant) to the tooth surface to be bonded, rinse and blow dry the bonding surface.3. Apply a uniform and thin layer of dental composite resin pre-treatment agent (adhesive) on the bonding surface, and illuminate with a dental light curing lamp for 20 seconds.4. After filling and carving with an appropriate amount of composite resin, the light intensity should not be less than 400mW/cm The light source is irradiated for 20 seconds to solidify. Curing depth 1.5mm. If the filling depth is large, the irradiation time can be appropriately extended or layered solidification filling can be carried out.5. Conduct trimming and polishing, and inspect with dental bite paper before trimming. It is recommended to use rubber polishing wheels and ultra-fine abrasive polishing strips.6. Recommended use of pulp protection and cushioning materials: calcium hydroxide (light cured or chemically cured) or other non oily cushioning materials. Do not use materials containing eugenol directly as a base.
Fruugo United Kingdom
Specification:Type: light curing composite resinShage: A1 A2 A3Net weight: 2.5gColor: as picture showPackage includes:1PC A1/A2/A3Features:1. Low polymerization shrinkage.2. High strength and polishability.3. Similar modulus of elasticity with dentine.4. Radioopaque and fluoride releasing Optimal polishability and high shade stability.5. Easy to mold.6. Easy to adhere to bracket for orthodontics.7. Simple and convenient to use.8. Used for all types of cavity preparations.Usage:1. Prepare cavities according to conventional requirements, remove decayed tissue, and clean cavities.2. Apply dental composite resin pre-treatment agent (etchant) to the tooth surface to be bonded, rinse and blow dry the bonding surface.3. Apply a uniform and thin layer of dental composite resin pre-treatment agent (adhesive) on the bonding surface, and illuminate with a dental light curing lamp for 20 seconds.4. After filling and carving with an appropriate amount of composite resin, the light intensity should not be less than 400mW/cm The light source is irradiated for 20 seconds to solidify. Curing depth 1.5mm. If the filling depth is large, the irradiation time can be appropriately extended or layered solidification filling can be carried out.5. Conduct trimming and polishing, and inspect with dental bite paper before trimming. It is recommended to use rubber polishing wheels and ultra-fine abrasive polishing strips.6. Recommended use of pulp protection and cushioning materials: calcium hydroxide (light cured or chemically cured) or other non oily cushioning materials. Do not use materials containing eugenol directly as a base.
Fruugo United Kingdom
Specification:Type: light curing composite resinShage: A1 A2 A3Net weight: 2.5gColor: as picture showPackage includes:1PC A1/A2/A3Features:1. Low polymerization shrinkage.2. High strength and polishability.3. Similar modulus of elasticity with dentine.4. Radioopaque and fluoride releasing Optimal polishability and high shade stability.5. Easy to mold.6. Easy to adhere to bracket for orthodontics.7. Simple and convenient to use.8. Used for all types of cavity preparations.Usage:1. Prepare cavities according to conventional requirements, remove decayed tissue, and clean cavities.2. Apply dental composite resin pre-treatment agent (etchant) to the tooth surface to be bonded, rinse and blow dry the bonding surface.3. Apply a uniform and thin layer of dental composite resin pre-treatment agent (adhesive) on the bonding surface, and illuminate with a dental light curing lamp for 20 seconds.4. After filling and carving with an appropriate amount of composite resin, the light intensity should not be less than 400mW/cm The light source is irradiated for 20 seconds to solidify. Curing depth 1.5mm. If the filling depth is large, the irradiation time can be appropriately extended or layered solidification filling can be carried out.5. Conduct trimming and polishing, and inspect with dental bite paper before trimming. It is recommended to use rubber polishing wheels and ultra-fine abrasive polishing strips.6. Recommended use of pulp protection and cushioning materials: calcium hydroxide (light cured or chemically cured) or other non oily cushioning materials. Do not use materials containing eugenol directly as a base.
Fruugo United Kingdom
Specification:Type: light curing composite resinShage: A1 A2 A3Net weight: 2.5gColor: as picture showPackage includes:1PC A1/A2/A3Features:1. Low polymerization shrinkage.2. High strength and polishability.3. Similar modulus of elasticity with dentine.4. Radioopaque and fluoride releasing Optimal polishability and high shade stability.5. Easy to mold.6. Easy to adhere to bracket for orthodontics.7. Simple and convenient to use.8. Used for all types of cavity preparations.Usage:1. Prepare cavities according to conventional requirements, remove decayed tissue, and clean cavities.2. Apply dental composite resin pre-treatment agent (etchant) to the tooth surface to be bonded, rinse and blow dry the bonding surface.3. Apply a uniform and thin layer of dental composite resin pre-treatment agent (adhesive) on the bonding surface, and illuminate with a dental light curing lamp for 20 seconds.4. After filling and carving with an appropriate amount of composite resin, the light intensity should not be less than 400mW/cm The light source is irradiated for 20 seconds to solidify. Curing depth 1.5mm. If the filling depth is large, the irradiation time can be appropriately extended or layered solidification filling can be carried out.5. Conduct trimming and polishing, and inspect with dental bite paper before trimming. It is recommended to use rubber polishing wheels and ultra-fine abrasive polishing strips.6. Recommended use of pulp protection and cushioning materials: calcium hydroxide (light cured or chemically cured) or other non oily cushioning materials. Do not use materials containing eugenol directly as a base.
Fruugo United Kingdom
Save Time and Money: Our hair removal wax pot kit for hair removal can be applied to any different type of wax. You can do hair removal work at home without having to go to the beauty salon in line. Save time and money on going to the beauty salon. Easy to clean, the wax set comes in a well-designed packaging, making it the perfect gift for women. Effective High Quality: Ideal electric wax heater kit for men and women hair removal needs, home self waxing or any waxing spa salon for full body hair removal needs. Waxing hair removal extracts the hair from the root, which slows down the growth rate and enjoys hair-free 3-4 weeks. Wax warmers are compact and therefore easy to carry, ideal for use at home or while traveling. New Waxing Warmer Kit Includes:Waxing kit have 4 Bags of Hard Wax Beads, 1 Silicone Bowl, 20 Waxing Sticks, 8 Anti-Smudge Rings, 5 Nose Hair Sticks. Equipped with the professional equipment you need for fast, efficient hair removal in the comfort of your home to save you time and money.Ideal for Brazilian Wax, Bikini Wax, Eyebrow Waxing Kit and Hot Wax Hair Removal Kit. Great Option of Hair Removal Kit: The wax melting machine adjusts the temperature through the knob, which is easy to use. according to the type of wax you want to use, turn the switch to the different temperature you want, so that the temperature of the wax will not be too high, allowing you to experience the salon like service. Easy Operation: Put the wax beads in a wax pot, heat the wax until it runs, and stir the wax with a spatula. Simply heat the wax in the pan for 10-12 minutes and apply using the included wooden applicator. The wax will harden on its own, you just need to pull it out smoothly, and you can start your beautiful experience.
Fruugo United Kingdom
Dog Ear Stand Sticker Assisted Erect Ear Support Tool Puppy Ear Vertical Fixed Corrective Bracket Patch Suitable for Doberman Pinscher Function 1. Curved design: The ear pads fit the dogs ears better. Ear braces can make your ears stand up quickly. 2. No skin irritation: The herbal ingredients of the ear protection patch have the functions of anti-allergy and improving cartilage hardness. 3. Comfortable to wear: the ear pads fit the dogs auricles. The dog feels more comfortable. 4. Prevent sweating: It is forbidden for dogs to be exposed to the sun for a long time. Sweaty ears can cause your dog to become itchy, which can lead to shaking of the head and scratching at the ears. 5. Instructions for use: It is recommended to replace the ear protection strips every three days, clean the inner skin of the ears, and reattach new ear protection strips after drying. Specification Material: milk calcium Dimensions: 5 x 2.5 cm, 5 x 3.5 cm, 6 x 3 cm, 7 x 3.5 cm, 10 x 5 cm Package Included: 1 x Dog Ear Support Patch notes: 1. Due to differences in monitors and light effects, the actual color of the item may be slightly different from the color shown in the picture. 2. Please allow 1-3cm error due to manual measurement. (1 inch = 2.54 cm)
Fruugo United Kingdom