RA Studfix V1 NM (Nursery School Model with lower screen height positions) A complete Floor to Wall Mounting System suitable for Flat Screens with a maximum recommended weight of 65kg and maximum VESA mount configuration of 600x400, designed for use in Nursery and Primary School environments where a lower screen position is required. This Nursery Model allows the bottom of an average sized 65 inch screen to be positioned approximately 25cm from Floor Level. A complete installation solution designed to enable Flat Screens or Touch Screens to be fixed to a wooden stud partition wall or solid wall and direct the weight of the screen directly to the floor. Ideal for installations when the wall itself cannot support the weight of a heavy screen. Suitable for Smart, Clevertouch, Ctouch, Promethean ATP, Philips, Samsung, LG, Panasonic, BENQ, iTouch, Vividtouch, Hitachi, Iiyama, iBoard, Genee Screens and many more................ The system includes two upright supporting box section legs which are fixed to the existing upright wooden studs inside the wall with a Wall Mounting Plate and Floor Plate included in the kit. This creates a rigid, safe and strong fixed mounting frame for the Flat Screen Mount (included) to fix onto and position the screen at a selection of height settings. All fixings, bolts, coach screws and plastic caps are included for a very neat and tidy installation. The two Upright Supporting Legs are hollow box section design and allow all connection cables to and from the screen to be routed through them. Cable exit entry slots are positioned on the inner sides of each leg to enable surface mounted cable trunking to route cables away to a connection panel if required (not included). Maximum CENTRE POINT of screen from floor level is approximately 1060mm. Minimum CENTRE POINT of screen from floor level is approximately 760mm. The Wall Mounting Plate can be fixed to the wall in a LOWER or HIGHER position to avoid any dado rails or network trunking on the walls surface. In the LOWEST position the centre of the plate will be 650mm from floor level and in the HIGHEST position the plate will be 980mm from floor level. The Wall Mounting Plate itself is 120mm high and has four mounting slots 400mm apart. Upright supporting legs are 500mm apart (centre to centre). Finished in durable White or Black powder coat finish. An Optional Extra Media Shelf is available for this system (RA Studfix Shelf) which can be positioned under the screen at a selection of height settings.
AV Parts Master
STIHL Wooden Sawhorse A lightweight, wooden saw horse from the Stihl manufacturer to make cutting firewood easier. The wooden sawhorse will fold flat for easy storage and the legs fold out.
eBay
The Agar pendant light is an eye-catcher with natural charm. Its lampshade consists of a mesh of light-coloured wooden branches, whose structure is further accentuated by the light from the lamp to be used inside.
Lampenwelt UK
RA Studfix V2 This complete installation solution is designed to enable Flat Screens or Touch Screens to be fixed to a wooden stud partition wall and direct the weight of the screen directly to the floor. The kit includes two upright supporting box section legs which are fixed to the existing upright wooden studs inside the wall with the Wall Mounting Plate and Floor Plate included in the kit. This creates a rigid, safe and strong fixed mounting frame for the Flat Screen Mount (included) to fix onto and position the screen at a selection of height settings. All fixings, bolts, coach screws and plastic caps are included for a neat and tidy installation. The two Upright Supporting Legs are hollow box section design and allow connection cables to and from the screen to be routed through them. Cable exit entry slots are positioned on the inner sides of each leg to enable surface mounted cable trunking to route cables away to a connection panel if required (not included). Maximum CENTRE POINT of screen height from floor level approximately 1365mm. Minimum CENTRE POINT of screen height from floor level approximately 1110mm. Suitable for any size screen with a maximum VESA mount configuration of 800 x 600 and up to a recommended maximum weight of 80kg. Full fitting instructions included with each kit and finished in durable White or Black powder coat finish.
AV Parts Master
A lightweight, wooden saw horse from the Stihl manufacturer to make cutting firewood easier. The wooden sawhorse will fold flat for easy storage and the legs fold out.
eBay
A stunning lectern with a powder coated steel base and opal perspex panels. And a coloured lacquered wooden top. Can be finished in the RAL of your choice. Suitable for vinyl logo (extra). Not suitable for AV equipment. A bespoke design service is also available for custom built requirements. The JM brand of furniture is highly sought after and regularly specified in public sector tenders as we continue to design attractive furniture that satisfies the ever advancing needs of the AV industry. Our podiums have been used in auditoriums, classrooms, conference rooms and stages, seminar rooms, lecture theatres, and churches. With a reputation for high quality products and service, and AV furniture for every budget and application, our customers have no need to go anywhere else.
AV Parts Master
The shade of the pendant lamp Cebu is woven by hand from Lampakanay fibers. Lampakanay is a swamp plant that grows in Mindanao (Philippines). Its fibers are considered very resistant and can be woven or braided well. The hanging lamp Cebu fits many...
Lampenwelt UK
Stihl Wooden Sawhorse Replacement Cord. Condition is New for Stihl WOODEN SAWHORSE PART NO. 00008814602 This is used to hold down the wood being cut on the saw horse ( sawhorse) It stretches and is solid rubber like material. Dispatched with Royal Mail 2nd Class.
eBay
The shade of the pendant lamp Cebu is woven by hand from Lampakanay fibers. Lampakanay is a swamp plant that grows in Mindanao (Philippines). Its fibers are considered very resistant and can be woven or braided well. The hanging lamp Cebu fits many...
Lampenwelt UK
A safe haven Stop running from noisy and crowded spaces. This acoustic office phone booth and workstation recreates privacy in open offices, offering you a moment of peace and quiet. Soundproof workstation Made of sound insulating felt that dampens outside sound for private phone calls and focused work. Reminiscent of the public phone booth or the typical small, wooden beach cabin. Available in a variety of colors and fabrics with the added option of customizing different color combinations. Tone it down The soft edges and round shapes help to diffuse sound even better while the tilted roof and non parallel walls prevent sound propagation inside the booth. The entire cocoon, upholstered with acoustic foam, soaks up sound waves, resulting in more internal privacy and less background noise from the outside world.
AV Parts Master
Lampenwelt UK
A safe haven Stop running from noisy and crowded spaces. This acoustic office phone booth and workstation recreates privacy in open offices, offering you a moment of peace and quiet. Soundproof workstation Made of sound insulating felt that dampens outside sound for private phone calls and focused work. Reminiscent of the public phone booth or the typical small, wooden beach cabin. Available in a variety of colors and fabrics with the added option of customizing different color combinations. Tone it down The soft edges and round shapes help to diffuse sound even better while the tilted roof and non parallel walls prevent sound propagation inside the booth. The entire cocoon, upholstered with acoustic foam, soaks up sound waves, resulting in more internal privacy and less background noise from the outside world.
AV Parts Master
Lampenwelt UK
The MASK8F is a robust 8 two way full range low impedance loudspeaker with timeless design suited for background music up to dance level music. This wooden cabinet loudspeaker is especially designed to produce a full hi fi sound at a higher power level without using a subwoofer.MASK8F has a very powerful 8 coated paper cone woofer. Together with the Ferro fluid cooled silk dome tweeter on a Waveguide horn, this results in a high SPL, an ultra low distortion and a sound that comes close to studio monitor quality. The built in Auto Reset 2 step Protection Guard together with the quality components makes MASK8F a fail safe loudspeaker, even at high power loads! After mounting the bracket on the wall, the sleeve in the bracket makes it quite easy and safe to fix the MASK8F loudspeakers, even in uncomfortable positions. The cabinet has several thread mounting points tapped at the back, the top and side of the cabinet. This way the cabinet can be rigged or mounting clamps can be used. MASK8F is delivered with a metal U Mounting bracket.Available in black or white. Certified for use with Zoom software
AV Parts Master
The 6-bulb Townshend pendant light made of black lacquered steel and light-coloured wood exudes industrial charm. Supplied without bulb.
Lampenwelt UK
Ready. Set. Collaborate! Quick start no delays, no stress Bring your laptop to the meeting room and get started right away. All you need to do is connect your laptop to Collabo with a USB cable and you re ready for your video call! Voice enhanced audio The built in speakers in Collabo have voice enhancing technology that provide excellent sound quality in a video call. Two noise cancelling, omni directional mics capture sound from any direction, ensuring everyone in a meeting can communicate easily, no matter where they re sitting. Wide field of view in HD Video conferencing with Collabo is the next best thing to a having face to face meeting. The Logitech camera records super sharp video, no matter the lighting conditions. 1080p HD resolution, 90 degree field of view and 4x digital zoom ensures a high quality image where everyone in the meeting is clearly visible. Works with any set up You are completely free to choose the software and hardware you want in your meeting room. Collabo is compatible with any kind of videoconferencing software and every kind of display, no matter the brand. The USB connection ensures that you can bring any kind of laptop to the meeting. Easy and flexible installation Collabo is designed to fit anywhere and in any kind of meeting space. It comes with its own wall brackets and drilling template, so that you can easily mount it under your display. Alternatively, you can attach the included rubber feet and place Collabo on a table or a shelf. Features: 2.0 full range stereo front speaker systemThe 2.0 full range stereo front speaker system offers a massive improvement to the sound quality when compared to the rear facing speakers you typically find in displays. Amplifier with built in DSP functionAmplifier with built in DSP functionality specifically enhances voice in video calls 1080p HD, 90 degree webcamWebcam with 1080p HD resolution, a wide 90 degree field of view, pan tilt and 4x digital zoom offers superior quality video for business use 2 noise cancelling microphones2 noise cancelling omnidirectional microphones ensure that everyone in the room is heard clearly. USB A connectorA universally compatible USB A connector that transfers sound and images from your laptop to Collabo and your display. Specification: Sound Bar Neets Sound Bar SB 1 MDF wooden enclosure with matte black vinyl finish Front grille textile covered MDF Audio outputOutput power 4 x 20 Wrms THD N 0.1 1 W Woofer 2 x 4 dual magnet sandwich membrane with rubber surround Tweeter 2 x 1 soft dome Frequency Response 50 Hz 20 kHz 3 dB Maximum SPL 106 dB SPL 1mOn OffAuto On Off YesPower input for Sound BarInput voltage 24 VDCMax power usage 50 WStandby power usage 0.5 WConnector 5,5 mm DC plugPower adaptor for Sound BarLine voltage 100 VAC 240 VACLine current max 1.5 A Line frequency 50 Hz 60 HzOutput voltage 24VMax output current 2.5A Webcam Logitech C930E 90 degree field of view Full HD1080p (1920 x 1080 pixels) 720p HD (1280 x 720 pixels) 4 x digital zoom H.264 video compression Premium glass lens with autofocus 2 noise cancelling, omnidirectional microphones RightLight 2 technology to deliver sharp images no matter the lighting conditions Hi speed USB 2.0 certified (also compatible with USB 3.0) External privacy shutter for glass lens HP 3005pr port expanderUSB port expanding feature HP 3005pr DisplayLink technology insideExtends one USB cable to screen, camera and speakersSupports Apple OS (MAC requires installation of additional drivers)Power input for HP 3005pr port expanderInput voltage 19.5 VDCMax power usage 65 WStandby power usage 0.5 WConnector DC plugPower adaptor for HP 3005pr port expanderLine voltage 100 VAC 240 VACLine current max 1.7 A Line frequency 50 Hz 60 HzOutput voltage 19.5VMax output current 3.33A General Width 1018 mm 40.1 inch Depth 116 mm 2.95 inch Height without camera 130 mm 5.1 inch Height with camera 183 mm 5.1 inch Weight 6.5 Kg Shipping width 1120 mm 44.1 inch Shipping depth 150 mm 5.9 Inch Shipping height 200 mm 7.8 Inch Shipping weight 8.5 Kg VESA Mounting Compatible with VESA 400 and VESA 800 for mounting on carts and stands Storage temperature 20 C to 50 CStorage moisture Non condensingPart no: 312 0050Included in the box Collabo by Neets productWeb camera5 Meter USB cable for laptop USB A to USB C adaptor2 Meter HDMI cable for screen Bracket and screws for wall mounting of Collabo by NeetsRubber feet for shelf mounting of Collabo by NeetsBracket and screws for camera mounting
AV Parts Master
Lampenwelt UK
RA Studfix V2 NM (Nursery School Model with lower screen height positions) A complete Floor to Wall Mounting System suitable for Flat Screens with a maximum recommended weight of 80kg and maximum VESA configuration of 800x600. Designed for use in Nursery and Primary School environments where a lower screen position is required. This Nursery Model allows the bottom of an average sized 65 inch screen to be positioned approximately 25cm from Floor Level. A complete installation solution designed to enable Flat Screens or Touch Screens to be fixed to a wooden stud partition wall or solid wall and direct the weight of the screen directly to the floor. Ideal for installations when the wall itself cannot support the weight of a heavy screen. Suitable for Smart, Clevertouch, Ctouch, Promethean ATP, Philips, Samsung, LG, Panasonic, BENQ, iTouch, Vividtouch, Hitachi, Iiyama, iBoard, Genee Screens and many more................ The system includes two upright supporting box section legs which are fixed to the existing upright wooden studs inside the wall with a Wall Mounting Plate and Floor Plate included in the kit. This creates a rigid, safe and strong fixed mounting frame for the Flat Screen Mount (included) to fix onto and position the screen at a selection of height settings. All fixings, bolts, coach screws and plastic caps are included for a very neat and tidy installation. The two Upright Supporting Legs are hollow box section design and allow all connection cables to and from the screen to be routed through them. Cable exit entry slots are positioned on the inner sides of each leg to enable surface mounted cable trunking to route cables away to a connection panel if required (not included). Maximum CENTRE POINT of screen from floor level is approximately 1060mm. Minimum CENTRE POINT of screen from floor level is approximately 760mm. The Wall Mounting Plate can be fixed to the wall in a LOWER or HIGHER position to avoid any dado rails or network trunking on the walls surface. In the LOWEST position the centre of the plate will be 650mm from floor level and in the HIGHEST position the plate will be 980mm from floor level. The Wall Mounting Plate itself is 120mm high and has four mounting slots 400mm apart. Upright supporting legs are 500mm apart (centre to centre). Finished in durable White or Black powder coat finish. An Optional Extra Media Shelf is available for this system (RA Studfix Shelf) which can be positioned under the screen at a selection of height settings.
AV Parts Master
50pcs Wooden Blank Bookmarks DIY Wooden Craft Bookmarks Wooden Laser-cut Wooden Pendants Wooden Square Tags Tassel Color Random
Aliexpress UK