ChargeMate 16 Charge, Mixed Storage , Secure Storage Charging Capacity: 8 16 devices Laptops Tablets Chromebooks Netbooks Fully retractable door In shelf cable management system Fully ventilated shelving Multi brand compatible Dimensions (Approx.): (H) 1080 x (W) 580 x (D) 550 mm Available in 5 colourways The ChargeMate 16, environmentally conscious design for the safe and secure charging of up to 16 netbooks, iPads, Chromebooks or tablet PCs. Manufactured in the UK from the highest quality materials and as with all CompuCharge laptop charging solutions, made to comply with EN60950:2000. The ChargeMate 16 has been designed as a compact, lightweight method of storing and charging up to 16 Netbooks, iPads, Chromebook or tablet PCs. The fully retractable door folds back flat against the side of the cabinet and is retained by magnets, eliminating the possibility of injury from doors sticking out, an excellent Health Safety point. Our simple in shelf cable management system allows for cables and AC adaptors to be stored safely. No more messy, untidy wires!! All shelves are designed with the end user in mind, with large spacing between for ease of access. The shelving is fully ventilated, which completely removes any potential for the overheating problems that can be found with some of the lower quality products in today s marketplace. Multi brand compatible , this means there is no restriction on the make or mix of laptops to be charged. For example a ChargeMate 16 could charge 16 different brands of netbook or Chromebook. Outlets are fitted inside the rear panel for secure access and connection, with 2 metres of mains cable. Please note that a twin 13 amp wall socket will be required for charging. Approximate dimensions 1080mm high x 580mm wide x 550mm deep All products sold by CompuCharge are supplied with a Lifetime Return to Base (RTB) Warranty
AV Parts Master
Please Note: Available in 5 colourways Call to order. The ChargeMate 20, environmentally conscious design for the safe and secure charging of up to 20 netbooks, iPads, Chromebooks or tablet PCs. Manufactured in the UK from the highest quality materials and as with all CompuCharge laptop and Chromebook charging solutions, made to comply with EN60950:2000. The ChargeMate 20 has been designed as a compact, lightweight method of storing and charging up to 20 Netbooks, iPads, Chromebooks or tablet PCs. The fully retractable door folds back flat against the side of the cabinet and is retained by magnets, eliminating the possibility of injury from doors sticking out, an excellent Health Safety point. Our simple in shelf cable management system allows for cables and AC adaptors to be stored safely. No more messy, untidy wires!! All shelves are designed with the end user in mind, with large spacing between for ease of access. The shelving is fully ventilated, which completely removes any potential for the overheating problems that can be found with some of the lower quality products in today s marketplace. Multi brand compatible , this means there is no restriction on the make or mix of laptops or Chromebooks to be charged. For example a ChargeMate 20 could charge 20 different brands of netbook or Chromebook. Outlets are fitted inside the rear panel for secure access and connection, with 2 metres of mains cable. Please note that a twin 13 amp wall socket will be required for charging. Approximate dimensions 1080mm high x 580mm wide x 550mm deep All products sold by CompuCharge are supplied with a Lifetime Return to Base (RTB) Warranty 2 way EPM 'Electronic Power Management'
AV Parts Master
Please Note: Available in 5 colourways Call to order. The ChargeMate 20, environmentally conscious design for the safe and secure charging of up to 20 netbooks, iPads, Chromebooks or tablet PCs. Manufactured in the UK from the highest quality materials and as with all CompuCharge laptop and Chromebook charging solutions, made to comply with EN60950:2000. The ChargeMate 20 has been designed as a compact, lightweight method of storing and charging up to 20 Netbooks, iPads, Chromebooks or tablet PCs. The fully retractable door folds back flat against the side of the cabinet and is retained by magnets, eliminating the possibility of injury from doors sticking out, an excellent Health Safety point. Our simple in shelf cable management system allows for cables and AC adaptors to be stored safely. No more messy, untidy wires!! All shelves are designed with the end user in mind, with large spacing between for ease of access. The shelving is fully ventilated, which completely removes any potential for the overheating problems that can be found with some of the lower quality products in today s marketplace. Multi brand compatible , this means there is no restriction on the make or mix of laptops or Chromebooks to be charged. For example a ChargeMate 20 could charge 20 different brands of netbook or Chromebook. Outlets are fitted inside the rear panel for secure access and connection, with 2 metres of mains cable. Please note that a twin 13 amp wall socket will be required for charging. Approximate dimensions 1080mm high x 580mm wide x 550mm deep All products sold by CompuCharge are supplied with a Lifetime Return to Base (RTB) Warranty
AV Parts Master
Sapphire Smart Move Twin Motor Electric Projection Screen THIS SCREEN HAS AN INBUILT DUAL MOTOR THAT OPERATES THE CASE AND HOIST SEPARATELY WITH USING ONLY ONE REMOTE CONTROL, MAKING THIS THE PERFECT SOLUTION FOR HIGH CEILING APPLICATIONS SUCH AS CHURCHES, SCHOOL HALLS, AUDITORIUMS AND THEATRES. The one motor is designed to lower the case up to 4.5m on hoist straps and the other is to lower the fabric. Radio remote control. The remote will operate the fabric and hoist straps separately. The remote control will operate the screen up to 25 meters away. Supplied with safety straps for additional security. Height adjustable hoist straps with the max drop of 4.5m. RS232 and Contact Closure Capable. Stylish black casing. THIS screen can be used with our STR (sold separately) Excellent Quality We stand by the quality of our products by offering an outstanding 3 year warranty.We recommend that this product and it 39;s fittings are inspected annually. Fabric specifications: Sapphire 39;s matt white fabric is composed of triple ply fibreglass laminate which helps prevent wrinkles and waves. The screen fabric consists of a special material that helps prevent the loss of light, making it compatible with standard long throw projectors. Our screen fabrics are designed to be fire, water, and mould resistant and can be cleaned if necessary. The top layer of the fabric has microdots that are made with PVC technology that helps create the best possible reflection.The 1.1 gain reflects the same amount of light back that the projector produces achieving a true cinema experience.The back of the fabric is completely black enabling you to put this in front of a window. Declaration of Conformity:Fall Arrest Examination Report:Black Belt Examination Report:Weight 99.5kg
AV Parts Master
DU9800Z Low Maintenance Laser Projector WUXGA (1920 x 1200) 18000 ANSI Lumens C.R.: 10,000:1 T.R.: 5 optional lenses from 0.84:1 to 7.00:1 throw ratio range RJ45: x2: HDBaseTx1, LANx1 48 kg World's First 18,000 Lumens Projector with Single Chip DLP The DU9800Z Single Chip WUXGA Laser Projector delivers 18,000 ANSI Lumens with its laser light source, the DU9800Z delivers up to 20,000 hours of operation. Additionally, the projector presents many benefits to System Integrators due to its small form factor and light weight that enables simple and swift installation. Vivitek offers a new Constant Brightness feature to help reduce blending maintenance and customise brightness with a built in light sensor inside the projector monitors the level of light. The DU9800Z is very stable projector and is ideally suited to 24 7 operation with low user intervention. Key features Extraordinarily high brightness at 18,000 ANSI lumens with only one DLP chip system to achieve outstanding performance WUXGA resolution and 10,000:1 contrast ratio for clear, crisp and bright projection Long lasting laser light source for up to 20,000 hours operations Installation flexibility is ensured with 5 optional lenses from 0.84:1 to 7.00:1 throw ratio range Designed for heavy duty 24 7 operations with 360 installation angle flexibility 3G SDI HDBaseT for robustness for long signal transmission Built in multi screen edge blending and warping features Motorized and wide lens shift range allows easy placement of the projector without distorting the image Lens Position Memory to facilitate set up New Constant Brightness feature helps reduce blending maintenance with a smart sensor continuously measuring and adjusting the illumination output Native Resolution WUXGA (1920 x 1200) Brightness 18000 ANSI Lumens Contrast Ratio 10,000:1 Max. Supported Resolution WUXGA (1920 x 1200) 60Hz Native Aspect Ratio 16:10 Lamp Life and Type Lamp free design. Laser light source lasts up to 20,000 hours Display Type Single chip DLP Technology by Texas Instruments Chip Size 0.96 DMD Throw Ratio 5 optional lenses from 0.84:1 to 7.00:1 throw ratio range Image Size (Diagonal) depending on lens selection Projection Distance depending on lens selection Zoom Ratio Motorized Zoom Focus Lens Shift ( Based on Full Image Height) Vertical: 50 ; Horizontal: 15 Offset (Based on Full Image Height) Motorized Lens Shift Keystone Correction Vertical: 40 ; Horizontal: 60 Video Compatibility SDTV (480i, 576i) EDTV (480p, 576p) HDTV (720p, 1080i, 1080p), NTSC (M, 3.58 4.43 MHz), PAL (B,D,G,H,I,M,N) SECAM (B,D,G,K,K1,L) I O Connection Ports VGA In (15pin D Sub), HDMI (2), Display Port, DVI D, Component (5 BNC) (RGBHV), VGA Out (15pin D Sub), RJ45 (x2: HDBaseTx1, LANx1), 12v Trigger (x2), RS 232, 3D Sync (x2: In and Out), 3G SDI (x2: In and Out), Remote Jack(wire remote) Dimensions (W x D x H) 681 x 530 x 248 mm Weight 48 kg Noise Level 43dB (Normal Mode) Power Supply: AC 100 240V, 50 60Hz Consumption: 1800W (Normal Mode),
AV Parts Master
RA Media Mate Mobile PRO XL Power Lift Mobile Riser for all makes of Flat Screen including Suitable for Smart, Clevertouch, Ctouch, Promethean ATP, Philips, Samsung, LG, Panasonic, BENQ, iTouch, Vividtouch, Hitachi, Iiyama, iBoard, Genee Screens up to 85 inch Maximum 120kg in weight. An ideal portable Touch Screen Solution or Shared Resource facility. Maximum VESA for this Trolley is 900x600. The travel from lowest to highest positions is approximately 675mm making it ideal for small children, right up to adult sized users very accessible for wheel chair users too due to its H Base design. Floor to CENTRE POINT of screen in LOWEST position is approximately 810mm. Floor to CENTRE POINT of screen in HIGHEST position is approximately 1485mm. Anti Collision (Anti Crush) feature is included in the specification of this product. Triple Power Lift Operation is smooth, quiet very progressive with factory programmable upper lower stop positions. Three metres of power cable, Twin Integral Surface mounted 13 Amp Sockets for Laptops Media Source Equipment Locking Front Caster Wheels are also included. This product is fully wired assembled then dispatched on a pallet and has a very minimal installation procedure with only the screen to fit, so fully operational very quickly. Finished in Durable Powder Coat finish. Full Certificate of conformity applies.
AV Parts Master
ultra slim flat screen wall mount with twin cantilever arms Designed to mount medium to large sized screens, this ultra slim twin cantilever arm wall mount features a tilting interface and three swivel points, allowing quick and easy repositioning of screens as required whether folded flat to the wall at a depth of just 40mm or at maximum extension. Cover plates to hide fixings and integrated cable management help make this a neat and tidy mounting solution which is ideal for commercial applications as well as home installations. Features: Universal screen interface suitable for all screens Ultra slim design allows close to the wall installation when folded flat Double articulated arms feature three swivel points Twin cantilever arm for extended reach ideal for corner mounting Easy tool less tilt mechanism Lateral adjustment of screen once mounted Integrated cable management Attractive coverplates to hide fixings Interface arms can be padlocked to help prevent unauthorised removal of screen (padlock not included) Includes spirit level for easy wall plate levelling during installation Suitable for concrete, brick and 16 stud walls Simple 'hook on' installation Specifications Mounting Mounting type Wall Minimum screen size 99.1 cm (39 ) Number of displays supported 1 Maximum VESA mount 600 x 400 mm Maximum screen size 190.5 cm (75 ) Maximum weight capacity 45 kg Ergonomics Cable management Yes Tilt angle range 15 15 Swivel angle 130 Technical details Cable management Yes Number of displays supported 1 Product colour Black Mounting type Wall Design Cable management Yes Product colour Black Weight dimensions Arm length 46.9 cm Width 650 mm Height 425 mm Depth (min) 4 cm Depth (max) 80.4 cm Other features Mounting type Wall
AV Parts Master
Sapphire Smart Move Twin Motor Electric Projection Screen THIS SCREEN HAS AN INBUILT DUAL MOTOR THAT OPERATES THE CASE AND HOIST SEPARATELY WITH USING ONLY ONE REMOTE CONTROL, MAKING THIS THE PERFECT SOLUTION FOR HIGH CEILING APPLICATIONS SUCH AS CHURCHES, SCHOOL HALLS, AUDITORIUMS AND THEATRES. The one motor is designed to lower the case up to 4.5m on hoist straps and the other is to lower the fabric. Radio remote control. The remote will operate the fabric and hoist straps separately. The remote control will operate the screen up to 25 meters away. Supplied with safety straps for additional security. Height adjustable hoist straps with the max drop of 4.5m. RS232 and Contact Closure Capable. Stylish black casing. THIS screen can be used with our STR (sold separately) Excellent Quality We stand by the quality of our products by offering an outstanding 3 year warranty.We recommend that this product and it 39;s fittings are inspected annually. Fabric specifications: Sapphire 39;s matt white fabric is composed of triple ply fibreglass laminate which helps prevent wrinkles and waves. The screen fabric consists of a special material that helps prevent the loss of light, making it compatible with standard long throw projectors. Our screen fabrics are designed to be fire, water, and mould resistant and can be cleaned if necessary. The top layer of the fabric has microdots that are made with PVC technology that helps create the best possible reflection.The 1.1 gain reflects the same amount of light back that the projector produces achieving a true cinema experience.The back of the fabric is completely black enabling you to put this in front of a window. Declaration of Conformity:Fall Arrest Examination Report:Black Belt Examination Report:Weight 99.5kg
AV Parts Master