The Lindy Modular AV Faceplate System allows you to create your own custom face plates by using a combination of Snap in Blocks and Keystone modules. Fit this HDMI Keystone into a Keystone Snap in Block and place into a face plate along side other Keystone and Snap in modules. These modules provide a full range of solutions for AV, networking, voice and audio installations. The wide selection of modules and face plates can be custom configured giving you greater control and flexibility. Additional required products... Please Note: The Lindy Modular AV Faceplate System must be used in conjunction with Lindy Keystone Snap in Blocks and Faceplates. Place this Keystone into either a Single Keystone Snap in Blocks or Dual Keystone Snap in Blocks which come in packs of four. Then use with a Single Gang Faceplate or Double Gang Faceplate.
AV Parts Master
Feed through coupler for HDMI applications.Our keystone snap in modules provide a full range of solutions for voice, home networking, home office, audio video and more. With the wide selection of snap in modules, you can custom configure your keystone wall plates and patch panels for greater control and more flexibility. Use this coupler for HDMI applications; just snap it into patch panels, compatible wall plates and surface boxes.
AV Parts Master
For 99 of professional AV installations the same set of modules are required, so Vision offer a simple package that contains a basic selection of modules as a starting point. Just select the length of the cable package you need to go with it from: 3m (9 ft) 5m (16 ft) 10m (33 ft) 15m (49) Techconnect3 Techconnect is a modular audio visual faceplate family engineered especially for AV installers. A surround which comes in two parts fits to a backbox (or mudring if your wall is hollow), then the modules fix in place to complete the installation. Techconnect is based around standard UK backbox sizes, and Vision also offers mounting hardware for other countries. Improved Fit and FinishTechconnect3 has more space behind the modules stash cables, and narrower and more even gaps between modules. Matt WhitePure white with a chiselled profile, Techconnect3 also has 11 mm of flat space above and below the connectors for information or company branding stickers. StrongerTechconnect3 has shorter modules and extra ribbing to reduce module flex. On parts where flex is desirable to avoid shattering ABS plastic is used. Screw In ModulesThe modules have a tab that hooks into the surround at the bottom, then a couple of turns of the pre installed screws locks the modules into place Passive and Active ModulesVision offer pass through modules for AV, IT, and pro audio applications, and active modules which boost USB or extend HDMI, VGA, and USB signals over CAT6 cable.You can even install a powerful audio amplifier module or a universal controller module right next to the connectivity modules. The faceplate is close at hand and securely fastened in place. Plug In CablesVision offer professional cables. VGA, Phono (RCA), and Minijack Techconnect cables have phoenix connectors on one end which plugs right in to the rear of the modules. These phoenix connectors can easily be removed to pull cables. EDID SupportVision s VGA cable included the SDA and SCL data lines to support EDID handshakes which allows the display device to communicate its supported display modes. No SolderingFaceplates that require soldering take time build onsite, and even for experts create a possible point of failure in the system. Techconnect de risks an installation. 3 Year WarrantyYou can t afford issues, and neither can we. Vision is totally focused on offering reliable products. Cable Package Contents 1 x VGA White, Ferrite core to stop RF interference. A moulded connector on one end, and a male phoenix connector on the other end which can be plugged directly into the rear of module. Gold plated male to male HD15 (15 pin) connector. Sheath PVC, outer diameter: 8.0 mm, Conductor thickness: 28AWG, Drain wire laid between aluminum mylar and braid, Al Mg alloy wire overall, 65 coverage braided shield. Impedance: at 10MHz, 75 (coaxial cable), Resistance 20 ( 1000m) 237.25. 1 x 3.5mm Minijack High grade white installation cable. A moulded connector on one end, and a male phoenix connector on the other end which can be plugged directly into the rear of a Techconnect faceplate module. 1 x HDMI White, 4K compliant, High Speed (Category 2) with Ethernet, HDMI 1.4, Gold plated HDMI A connectors, Sheath: outer diameter: 9.5mm, Conductor thickness: 5 m 28 AWG (American Wire Gauge) 10 m 26 AWG 15 m 24 AWG. Sheath outer diameter: 5 m 7.3 mm ( 16.4 ft 0.29 ) 10 m 8.0 mm (32.81 ft 0.31 ) 15 m 9.5 mm (49.21 ft 0.37 ). PACKAGE DETAILS: CARTON DIMENSIONS:3 5m Cable Package: 200 x 200 x 90mm (7.87 x 7.87 x 3.54 )10m Cable Package: 220 x 220 x 120mm (8.66 x 8.66 x 4.72 )15m Cable Package: 250 x 250 x 140mm (9.8 x 9.8 x 5.51 ) PACKAGED WEIGHT:3m Cable Package: 1.0kg 2.2lb5m Cable Package: 1.35kg 2.97lb10m Cable Package: 2.2kg 4.85lb15m Cable Package: 3.73kg 8.22lb CABLES COMPLIANCES: RoHS, WEEE, CE EMC, FCC
AV Parts Master
Our keystone snap in insert provide a full range of solutions for voice, home networking, home office, audio, video and more. With our wide selection of snap in modules, you can custom configure keystone wall plates and patch panels for greater control and flexibility. Just snap in this blank insert to protect an unused port.
AV Parts Master
RA Studfix V2 This complete installation solution is designed to enable Flat Screens or Touch Screens to be fixed to a wooden stud partition wall and direct the weight of the screen directly to the floor. The kit includes two upright supporting box section legs which are fixed to the existing upright wooden studs inside the wall with the Wall Mounting Plate and Floor Plate included in the kit. This creates a rigid, safe and strong fixed mounting frame for the Flat Screen Mount (included) to fix onto and position the screen at a selection of height settings. All fixings, bolts, coach screws and plastic caps are included for a neat and tidy installation. The two Upright Supporting Legs are hollow box section design and allow connection cables to and from the screen to be routed through them. Cable exit entry slots are positioned on the inner sides of each leg to enable surface mounted cable trunking to route cables away to a connection panel if required (not included). Maximum CENTRE POINT of screen height from floor level approximately 1365mm. Minimum CENTRE POINT of screen height from floor level approximately 1110mm. Suitable for any size screen with a maximum VESA mount configuration of 800 x 600 and up to a recommended maximum weight of 80kg. Full fitting instructions included with each kit and finished in durable White or Black powder coat finish.
AV Parts Master
Feed through coupler for one USB Type A male cable connector and one USB Type B male cable connector.Our keystone snap in modules provide a full range of solutions for voice, home networking, home office, audio video and more. With the wide selection of snap in modules, you can custom configure your keystone wall plates and patch panels for greater control and more flexibility. Use this coupler for one USB Type A male cable connector and one USB Type B male cable connector; just snap it into patch panels, compatible wall plates and surface boxes.
AV Parts Master
For 99 of professional AV installations the same set of modules are required, so Vision offer a simple package that contains a basic selection of modules as a starting point. Just select the length of the cable package you need to go with it from: 3m (9 ft) 5m (16 ft) 10m (33 ft) 15m (49) Techconnect3 Techconnect is a modular audio visual faceplate family engineered especially for AV installers. A surround which comes in two parts fits to a backbox (or mudring if your wall is hollow), then the modules fix in place to complete the installation. Techconnect is based around standard UK backbox sizes, and Vision also offers mounting hardware for other countries. Improved Fit and FinishTechconnect3 has more space behind the modules stash cables, and narrower and more even gaps between modules. Matt WhitePure white with a chiselled profile, Techconnect3 also has 11 mm of flat space above and below the connectors for information or company branding stickers. StrongerTechconnect3 has shorter modules and extra ribbing to reduce module flex. On parts where flex is desirable to avoid shattering ABS plastic is used. Screw In ModulesThe modules have a tab that hooks into the surround at the bottom, then a couple of turns of the pre installed screws locks the modules into place Passive and Active ModulesVision offer pass through modules for AV, IT, and pro audio applications, and active modules which boost USB or extend HDMI, VGA, and USB signals over CAT6 cable.You can even install a powerful audio amplifier module or a universal controller module right next to the connectivity modules. The faceplate is close at hand and securely fastened in place. Plug In CablesVision offer professional cables. VGA, Phono (RCA), and Minijack Techconnect cables have phoenix connectors on one end which plugs right in to the rear of the modules. These phoenix connectors can easily be removed to pull cables. EDID SupportVision s VGA cable included the SDA and SCL data lines to support EDID handshakes which allows the display device to communicate its supported display modes. No SolderingFaceplates that require soldering take time build onsite, and even for experts create a possible point of failure in the system. Techconnect de risks an installation. 3 Year WarrantyYou can t afford issues, and neither can we. Vision is totally focused on offering reliable products. Cable Package Contents 1 x VGA White, Ferrite core to stop RF interference. A moulded connector on one end, and a male phoenix connector on the other end which can be plugged directly into the rear of module. Gold plated male to male HD15 (15 pin) connector. Sheath PVC, outer diameter: 8.0 mm, Conductor thickness: 28AWG, Drain wire laid between aluminum mylar and braid, Al Mg alloy wire overall, 65 coverage braided shield. Impedance: at 10MHz, 75 (coaxial cable), Resistance 20 ( 1000m) 237.25. 1 x 3.5mm Minijack High grade white installation cable. A moulded connector on one end, and a male phoenix connector on the other end which can be plugged directly into the rear of a Techconnect faceplate module. 1 x HDMI White, 4K compliant, High Speed (Category 2) with Ethernet, HDMI 1.4, Gold plated HDMI A connectors, Sheath: outer diameter: 9.5mm, Conductor thickness: 5 m 28 AWG (American Wire Gauge) 10 m 26 AWG 15 m 24 AWG. Sheath outer diameter: 5 m 7.3 mm ( 16.4 ft 0.29 ) 10 m 8.0 mm (32.81 ft 0.31 ) 15 m 9.5 mm (49.21 ft 0.37 ). PACKAGE DETAILS: CARTON DIMENSIONS:3 5m Cable Package: 200 x 200 x 90mm (7.87 x 7.87 x 3.54 )10m Cable Package: 220 x 220 x 120mm (8.66 x 8.66 x 4.72 )15m Cable Package: 250 x 250 x 140mm (9.8 x 9.8 x 5.51 ) PACKAGED WEIGHT:3m Cable Package: 1.0kg 2.2lb5m Cable Package: 1.35kg 2.97lb10m Cable Package: 2.2kg 4.85lb15m Cable Package: 3.73kg 8.22lb CABLES COMPLIANCES: RoHS, WEEE, CE EMC, FCC
AV Parts Master
Manual Wall Screen, 100 quot; 4:3, Matte White, 1 Year RTB Warranty. Dual Wall and Ceiling Mountable, Self Locking Mechanism.Optoma offer a wide selection of quality front projection screens suitable for any situation, from small meeting to large conference rooms and great for home cinema applications. All Optoma screens are built to a high standard and are rigorously checked and tested throughout the production process to ensure the highest possible build quality and finish. Optoma s unrivalled understanding of both the market place and emerging technologies has allowed us to utilize our expertise to further expand our product offering to cater for every requirement, whilst still delivering great value.PMG projection screens are popular because they are inexpensive and easy to operate. Optoma Manual Screens offer Selflock and Controlled Screen Return. Selflock:Pull down the screen and hold for 3 seconds, then release. The screen will stay at the desired position. Controlled Screen Return:Instead of just retracting back into the case and possibly causing damage if you re not careful, Optoma s PMG Manual Screens feature Speed Reduction Retraction. Simply pull down lightly to release the locking mechanism, let go and the screen will slowly return to the casing Model Number DS 3084PMG Type Manual Format 4:3 Gain 1.0 Screen Material Matte White Viewing Size (wxh) (mm) 1710 x 1280 Diagonal Viewing (inch) 84 Black Border R L (mm) 40 Black Border Bottom (mm) 30 Black Border Top (mm) 80 Weight (Kgs) 10.7 Case Dimensions (Including Bracket) 1910 x 92 x 85 Carton Size 2055 x 178 x 133
AV Parts Master