Type C to Ethernet Converters allow users to connect USB Type C equipped devices to a Gigabit Ethernet network. The Lindy USB 3.2 Type C to 2.5G Ethernet Converter is perfect for users looking to connect a computer, notebook or tablet to a 2.5 Gigabit Ethernet network via a Type C USB port. It supports extremely high data rates up to 2.5Gbps on existing Cat.5e 6 cabling infrastructure. This Converter is ideal for thin and light laptops or tablets which do not feature wired network connectivity. With its small size and lightweight design this USB 3.2 to 2.5G Ethernet Converter is easy and convenient to carry, and because it is powered by the USB Bus no power adapter is required. It is compatible with Thunderbolt 3 ports to cover a wide range of devices. please make sure that the connected switch supports 2.5GBASE T (IEEE 802.3bz) Information about USB 3.0, 3.1 3.2 USB 3.0, USB 3.1 and USB 3.2 PCs, cables and devices are all compatible with each other, when using either a USB Type A or USB Type C host interface. USB 3.0, USB 3.1 Gen 1 and USB 3.2 Gen 1 all support data transfer rates up to 5 Gbps. USB 3.1 Gen 2 and USB 3.2 Gen 2 both support data transfer rates up to 10 Gbps.
AV Parts Master
This adapter cable accepts video signals via DVI D input and converts it into a DisplayPort signal. This allows DVI D equipped workstations or PC s to be connected to modern DisplayPort monitors, with support for DVI D single link resolutions up to 1200p 60Hz (1920x1200). Due to its lower power design the converter can typically be powered directly from a PC s DVI D port, in cases where the power output of the DVI D port is insufficient (lower than 450mW) the integrated USB cable can be connected to a USB port or USB power supply to power the converter. Package Contents DVI D to DisplayPort Adapter Cable
AV Parts Master
Cat.7 S FTP LSZH network cable with Cat.6A connectors supports bandwidth up to 600MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase T. The Cat.7 cable material for operating frequencies up to 600MHz with taotal braided shielding and foil single wire shielding (S FTP) was developed for use in data centres, server rooms, rack mounting of network and control cabinets etc. for networks up to 10GBaseT. These cables are manufactured and tested according to the ISO IEC 11801 specification. The cables are packaged individually in a polybag. The gold plated contacts ensure reliable, corrosion free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal. This product uses Cat.7 cable material. The Cat.7 standard originally defined the GG45 connectors, which were intended as a further development of RJ45, but were not able to establish themselves on the market. In the meantime, the RJ45 connector developed to easily meet the requirements of Cat.7, but has never been defined for Cat.7. Therefore the imprint on the cable reads as follows: Cat.6A S FTP patch cords with 600MHz raw cable .
AV Parts Master
The Lindy USB 3.2 Gen 2x2 NVMe M.2 SSD Enclosure allows the user to install a PCIe NVMe based M.2 SSD as a portable external drive to USB devices like laptops or PCs. Support for the USB 3.2 Gen 2x2 standard guarantees SuperSpeed 20Gbps data transfer rates. UASP support also ensures faster speeds for UASP enabled computers. This Lindy enclosure is compatible with PCIe NVMe based M.2 SSDs with M key in 30, 42, 60 and 80mm lengths. USB bus powered, therefore requiring no external power supply, ensures this enclosure is an ideal portable solution for IT professionals on the go. The enclosure has a robust and elegant aluminium design for better heat dissipation.Please note that that 20Gbps full support is only possible with a USB 3.2 2x2 host controller.
AV Parts Master
Cat.7 S FTP LSZH network cable with Cat.6A connectors supports bandwidth up to 600MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase T. The Cat.7 cable material for operating frequencies up to 600MHz with taotal braided shielding and foil single wire shielding (S FTP) was developed for use in data centres, server rooms, rack mounting of network and control cabinets etc. for networks up to 10GBaseT. These cables are manufactured and tested according to the ISO IEC 11801 specification. The cables are packaged individually in a polybag. The gold plated contacts ensure reliable, corrosion free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal. This product uses Cat.7 cable material. The Cat.7 standard originally defined the GG45 connectors, which were intended as a further development of RJ45, but were not able to establish themselves on the market. In the meantime, the RJ45 connector developed to easily meet the requirements of Cat.7, but has never been defined for Cat.7. Therefore the imprint on the cable reads as follows: Cat.6A S FTP patch cords with 600MHz raw cable .
AV Parts Master
The Lindy C6 HDBaseT HDMI 18G IR Extender is a complete high performance solution for extending HDMI signals over long distances via Cat.6 network cable. Combined this extender provides high quality content distribution up to distances of 150m. The following distance and resolution combinations are possible when using high quality Cat.6 U UTP or F UTP cable:150m (492.12ft) 1280x720 60Hz via Long Reach Mode100m (328.08ft) 3840x2160 30Hz 4:4:4 8bit70m (229.66ft) 3840x2160 60Hz 4:4:4 8bit Supporting resolutions up to 4K UHD 3840x2160 60Hz, video can be viewed in stunning clarity, while additional support for HDR (High Dynamic Range) allows content to be displayed with enhanced brightness, greater contrasts of blacks and whites and a much wider colour gamut. This provides a reliable solution for creating eye catching digital signage in retail, immersive displays at events or engaging setups in larger conference rooms or lectures halls. An HDMI loop out port provides additional capability for connecting a local display for monitoring of the video content in security or close range distribution in residential installs, while simultaneously extending the signal to the receiver. PoC (Power over Cable) functionality provides additional flexibility. This allows power to be supplied alongside data through Cat.6 network cable in a point to point connection between the transmitter and receiver, meaning only a single power supply is required at the transmitter unit. Ideal when power outlets are limited at the receiver end of the installation. Featuring bi directional IR ports at both sides of the setup, the source equipment can be easily controlled from the display side, and the display can also be controlled from the HDMI source side. Combined with CEC control, which allows commands from one main remote, this extension system allows for complete and simple control for the user. Terminal blocks allows for pass through of RS 232 commands when integrated into control systems. HDBaseT is a globally recognised standard for high quality distribution of AV content and other technologies, including power and control, over longer distances via low cost Cat.6 or above cable. HDBaseT and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance. Please Note: This product uses the DSC method of compression to achieve 18G resolutions. If using another 18G HDBaseT product combined with this, please ensure both products support the same compression type.
AV Parts Master
Cat.7 S FTP LSZH network cable with Cat.6A connectors supports bandwidth up to 600MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase T. The Cat.7 cable material for operating frequencies up to 600MHz with taotal braided shielding and foil single wire shielding (S FTP) was developed for use in data centres, server rooms, rack mounting of network and control cabinets etc. for networks up to 10GBaseT. These cables are manufactured and tested according to the ISO IEC 11801 specification. The cables are packaged individually in a polybag. The gold plated contacts ensure reliable, corrosion free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal. This product uses Cat.7 cable material. The Cat.7 standard originally defined the GG45 connectors, which were intended as a further development of RJ45, but were not able to establish themselves on the market. In the meantime, the RJ45 connector developed to easily meet the requirements of Cat.7, but has never been defined for Cat.7. Therefore the imprint on the cable reads as follows: Cat.6A S FTP patch cords with 600MHz raw cable .
AV Parts Master
Lindy's Cat.6 Patch Cables are manufactured and tested to conform with the ISO 11801 specification. A robust snagless strain relief design prevents damage to the connector latch during installation and removal. Gold plated pins ensure complete signal integrity no matter the application. Each cable is packaged in a polybag, Cables of various colours are also available and therefore ideally suited for structured cabling in server cabinets or wall cabinets. RJ45 connectors offer universal connectivity to computers and network components, such as routers, switches, network printers and network attached storage devices. These cables are also ideal for use in data centres, rack spaces, server rooms and network cabinets. Additional uses include security systems and AV installations.
AV Parts Master