search results

  1. Britax Rear Trailer Light / Combination Lamp Lighting TR049

  2. Trailer Hubs Stub Kit 4 inch PCD Hub 2 x Stub shafts with 1.57” Axles 750kg

    Weight capacity per pair is 750kg. 3/8“ UNF studs on 4” (100mm) PCD hubs. 2 x Stub shafts with 1.57” axles. Stub axles have a 40mm Square section. Stub Length Excluding Shaft 200mm. 2 x Cast 4 stud trailer hubs.

    eBay

  3. CARAVAN WHEEL BEARING replaces ALKO 605124 KNOTT 45887.10 34x64x37 TRAILER HUB

  4. TRAILER SUSPENSION UNITS 350KG WITH HUBS 4"PCD - GALVANIZED

    THESE ARE A PAIR OF 350KG TRAILER SUSPENSION UNITS TO FIT UNBRAKED TRAILERS. GALVANIZED BODY FINISH.

    eBay

  5. Pack of 8 M12 x 1.5 Wheel Studs And Nuts For 100mm PCD Trailer Hubs

  6. 350kg Galvanised Trailer Suspension Unit & Hubs (Pair) 4" PCD Taper Bearings

    Maximum weight (per pair) 350kg. 1 x 350kg Supension Units (1 Pair). Fitted with standard 1" trailer stub axles and supplied with 4" PCD hubs and taper roller bearings. 2 x 4" PCD Trailer Hubs. Complete with washers and castle nuts for mounting the hubs.

    eBay

  7. Trailer Hubs 4 inch PCD Hub 2 x Square Stub Axles 270 Long 35x35 Wide 750kg

    Weight capacity per pair is 750kg. Pair of trailer hubs and stub axles. 3/8" UNF Studs on 4" (101.6mm) PCD Hubs. Stub Axles. Stub axles have a 35mm Square section. 2 x Stub Axles with 1" shaft. Stub Length Excluding Shaft 200mm.

    eBay

  8. Pair Of Trailer Cast Wheel Hub 4" PCD 1" Taper Bearing 4 Stud With Nuts And Cap

    Requires a wheel with a 4" (101.6mm) PCD. -Fits a standard 1" trailer stub axle. -Taper Roller bearing hub. -The hub is also fitted with a grease nipple. - 2 X Cast Hub (unplated).

    eBay

  9. Pair of Trailer Cast Wheel Hubs 4 Stud 4" PCD Taper Bearing - SUIT 1" Axle Shaft

    Pair of Trailer Cast Wheel Hubs 4 Stud with a 4" PCD. 2 x Cast 4 stud trailer hubs (4" 101.6mm PCD). 3/8" UNF Studs on 4" (101.6mm) PCD Hubs. The bearing shells are pre pressed into the hub ready for quick fitting.

    eBay

  10. 100MM PCD HUB TRAILER SUSPENSION UNITS 500KG WITH HUBS- GALVANIZED BODY

    100MM PCD HUBS, USING M12 STUDS AND NUTS, REQUIRING 19MM SOCKET TO REMOVE. SUITS 100MM PCD WHEELS WITH 60MM CENTRE BORE. STANDARD STUB LENGTH. THESE ARE A PAIR OF 550KG TRAILER SUSPENSION UNITS TO FIT UNBRAKED TRAILERS.

    eBay

  11. 500kg Trailer Suspension Units Hub Bearing 4"PCD 4 Stud Wheel Tyre 400x8" 4PLY

    Far tougher and long lasting than most 500kg suspension units. Maximum weight (per pair) 500kg. To make sure your new wheel will fit your trailer you need to check the stud pattern size and this is known as the PCD.

    eBay

  1. Next Page (Page 2)