search results

  1. 5500W Tankless Instant Electric Water Heater with Touch Panel Remote Control

    Features 1、[Easy Installation] Instant electric water heater, small size, fast heating, simple and convenient installation, suitable for kitchens, toilets, showers and other places. 2、[Intelligent Constant Temperature] The temperature range is 30‑55℃, suitable for daily washing, hand washing, dish washing, vegetable washing, face washing, bathing, etc. 3、[Rapid Heating] Electric water heaters can instantly provide continuous hot water at 30℃ or higher without waiting for preheating or terrible temperature rises and drops. 4、[Easy To Use] Equipped with digital display and touch control panel, easy to set the temperature, and can also be turned on or off by remote control to adjust the temperature. 5、[High Safety] Multiple protection devices, the internal water and electricity lines are designed for branch operation to avoid water leakage or scale accumulation hazards. Specifications Item Type: Water Heater Material: Aluminum Die Casting+PC+Brass Weight: Approx. 1780g / 62.8oz Model: LF-001 Heating Body Material: Aluminum Die Casting Voltage: 220V Power: 5500W Frequency: 50-60HZ Wire: 2.5m㎡ Remote Control Power Supply: 2 x AAA Battery (Battery Not Included) Temperature Range: 30-55℃ Product Size: Approx. 21x15x5.5cm / 8.3x5.9x2.2in Water Source Pressure: 0.04-1.2MPa Installation Environment Requirements: Kitchen, bathroom, toilet, shower room, wire requirements greater than 2.5mm²; circuit breaker switch greater than 32amp Common Faults and Solutions: 1. Check whether the power supply is normally energized, the indicator will light up to show the temperature when the power is on, and it will not light up if it is not energized. 2. Under normal power‑on conditions, the water flow is turned on, press the middle switch key, the machine starts heating, and the water heater displays: set temperature, water flow, water outlet temperature. 3. If the temperature does not rise, there are two possibilities: one is the temperature control switch (overheat protection switch) inside the water heater, which can be recovered by pressing the temperature control switch; the other is the heating pipe failure, just replace the heat pipe 4. If there is no heating, the display shows the temperature, but the water flow and the set temperature are not displayed, indicating that the water flow has not passed through the water heater, or the water pressure is too low, or the installation direction is wrong. Note that the water inlet and outlet must be installed correctly. If the pressure is enough and the water does not heat up, then check the water heater inlet turbine, there may be dirt stuck in the turbine, causing the water heater to not start. 5. It is recommended that the length of the water outlet pipe of the water heater should not exceed 3 meters. If it exceeds, there may be a water pressure difference due to the length of the water pipe, and the water pressure is not enough to start. (If the water tower is used in rural areas, the height of the water tower is required to be higher than 10 meters, so that the water pressure reaches the starting value) 6. The display shows E1 over temperature, E4/E5 or temperature sensor failure, first turn off the power, run the machine with cold water, and then use it when it is powered on. Note that the water flow should not be too small in normal use. 7. The heating tube failure displays E2, and the heating tube needs to be replaced. Package List 1 x Water Heater 4 x Screw 4 x Expansion Tube 1 x Manual 1 x Remote Control (Battery Not Included)

    Fruugo United Kingdom

  2. Desktop Stand-Uniden Bearcat UBC-3500XLT Hand Held Scanner/Receiver, Multicolor

    Unique, Bespoke and Designed Specifically for the 3500XLT Scanner. I am a proud owner of a 3500xlt and I do try to take good care it. Desktop Stand for Your Uniden Bearcat UBC-3500XLT Hand Held Scanner.

    eBay

  3. Pit Boss850 Digital Thermostat Controller Kit Replacement

    Replacement for Pit boss Control Board 70120, Compatible with Pit Boss Wood Pellet Grills. LCD display, shows exact cooking temperature; Eight Cook Temperature Settings (200 to 475 degrees). With smoke mode and high-temperature mode, you can enjoy delicious grilled meat in different modes. The temperature sensor Kit is easy to install, allowing you to enjoy the barbecue and accurately read the cooking temperature. Standard production, strictly tested before export. Colour:Black Material:ABS Package Contents: 1x Digital Thermostat Controller Kit Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

    Fruugo United Kingdom

  4. BNC Mobile Radio Antenna Window Mount Scanner Radio Digital Analog WIDE BAND

    Cable Connector:BNC Male Connector. Radio Shack Radio Scanner: PRO-2018 PRO-197 PRO-650 PRO-163 PRO-405 PRO-528 PRO-668 PRO-94 PRO-404 PRO-95 PRO-62 PRO-83. Compatible with Radio Scanner Uniden Radio Scanner: BCT15X, BCD996XT, BCD996P2, BCD536HP, BC278CLT, BC350A, BC350C, BC355C, BC355N, BC340CRS, BC345CRS, BC365CRS, BC370CRS, BC700A, BC780XLT, BC785D, BC796D, BC860XLT, BC895XLT, BC898T, BCT7, BCT8, BC75XLT, BC125AT, BCD325P2, BC55, BC60XLT, BC80XLT, BC72XLT, BC92XLT, BC95XLT, BC100, SC230, BC200, SC200, SC150, SC180, SC235, BC120, BC72, BC80, BC246, BR330.

    eBay

  5. Low-Power Digital Flowmeter Featuring a 4-Point Flow Sensor for Professional Use

    Digital LCD display Water flow sensor meter flowmeter totameter Temperature for time record With G1/2" flow sensor Feature : Very easy to Install Product with high sealing performance High quality. With backlight Package included: 1 x Digital Flow Meter 1 x G1/2 Flow sensor 1 set of mounting accessories Instruction & Specifications: 1,Temperature The temperature display range is -99-999. Unit C is Celsius and F is Fahrenheit. Temperature unit It can be switched by pressing the "+" for key. 2, Usage of for time / flow rate display When there is water flow, it will automatically jump to the flow rate display, and when there is no water flow, the total for time will be displayed. Total for time unit DAY Indicates days, HRS indicates hours, and for time units can be switched by long pressing the "+" for key. temperature display Use for time/flow rate display Water flow painting display Total flow character character TOTAL Battery indication Total water consumption The flow rate unit LPM is "l/min", GPM is "gallon/min", can be short-pressed by "-" for Key switch. 3, Battery prompt The battery alert icon flashes when the battery is low, prompting the user to replace the battery. In electricity It will not be displayed if there are sufficient quantities. 4, Water flow painting When a flow of water is detected, the stream for head animation will begin to show the water droplets. 5, Total water consumption, flow rate display The total water consumption is expressed in litres of L and gallons of gallons, and the unit is passed. When the total water consumption is less than 10000L (or GAL) will be accurate to two decimal places, when the total water consumption is greater than 9999.99 L (or GAL) The decimal point will be hidden. The maximum measurement 999999L (Note: If the upgrade, if the unit is set Into the GAL, also count 999999L clear 0, that is, remember to 219969GAL clear 0), after more than Remeasurement starts at 0. 6, K value setting character (K SETTING) The K value setting character will be displayed when entering the interface number: 00 for the K value setting interface (K SETING) Show it 7, Total Traffic Character (TOTAL) When the system is powered on, the total flow character is displayed on the main screen. , three, settings and interface A, how to set the system operating mode Use the battery three AAA battery interface to power the system.(Not include battery) B, the main interface and the main interface settings The characters TOTAL, total water consumption, temperature, total usage for time, etc. will be displayed under the main screen. C. Setting of K value setting interface and K value setting interface In the main interface, short press "SET" for key once to jump to the K value setting interface. "K SETTING", interface number 00, and K value are displayed under the K value setting screen. Press the "SET" for key in the K value setting interface to set the K value. The first digit of the K value after long pressing the "SET" for key Flashes, short press "+" flashes digits increases by 1; short press "-" flashes digits decreases by 1; short press "SET" Press to switch to the next digit. After setting, long press "SET" for key to save the settings. D, other a, the system's sleep mechanism In the use of battery interface power supply, in order to save energy and improve battery life, the system is unmanned And if there is no water flow, it will go to sleep. The display will automatically jump to the sleep state The main interface and keep the display function. Automatically wakes up to the metering state when water flows through. b, the system reset There is a RESET symbol on the back of the board with two contacts next to it. Two contacts after the system is powered on Short-circuit to about 2 seconds, the system will restore the factory settings, clear the total for time and total water consumption. G1/2 flow sensor : Water pressure resistance> 1.75MPa Flow range 1-25L / min With Temperature Sensor This Flow Meter Only can use this Flow Sensor , Because this Flow sensor is Customized version Low power consumption ,If use other Flow Sensor not Low power consumption, the battery only can use two days.

    Fruugo United Kingdom

  6. Desktop Stand-Uniden Bearcat UBC-3500XLT Hand Held Scanner/Receiver, Multicolor

    Unique, Bespoke and Designed Specifically for the 3500XLT Scanner. I am a proud owner of a 3500xlt and I do try to take good care it. Desktop Stand for Your Uniden Bearcat UBC-3500XLT Hand Held Scanner.

    eBay

  7. 200 Kg Electronic Scale Sensor Digital Load Cell Weight Sensor Scale Load Cell Durable Single Beam 2025 Walkbee SZRH A-F

    Comprehensive error: 0.02%F.S Sensitivity: 1.0 +/- 0.1mv/v Non-linearity: 0.02%F.S Hysteresis: 0.02%F.S Repeatability: 0.02%F.S Creep: 0.02%F.S/10min output: +/- 2%F.S Input impedance: 405 +/- 10 ohm Output impedance: 350 +/- 3 ohm Insulation resistance: greater or to 5000M ohm(100VDC) Excitation voltage: 5VDC~12VDC Temperature compensation range: 10~+40 Operating temperature range: -20~+60 Influence of temperature: 0.03%F.S/10 Sensitivity temperature influence: 0.02%F.S/10 Safe overload range: 120% Limit overload range: 150% Protection level: IP65 Colour: silver Material: aluminum alloy Package Contents: 1 * Electronic scale Only the above package content, other are not included. Note: Light and different displays may cause the color of the item in the a little different from the real thing. The measurement allowed error is +/- 1-3cm.

    Fruugo United Kingdom

  8. Uniden Bearcat UBC125XLT Scanner Receiver

    UNIDEN BEARCAT UBC 125XLT. GREAT LITTLE SCANNER. FREQUENCIES WILL BE CLEARED BEFORE DISPATCH. NOT INCLUDED. NO USB CABLE.

    eBay

  9. Meat Probe for Pit Boss Pellet with Digital Control Meat Probe

    [Replacement for Pit Boss]The meat probe is perfectly fits for Pit Boss pellet grills and pellet smokers with digital control meat probe capability. Suitable for all meats, it provides accurate meat temperature monitoring for your Pit Boss grill. [High Quality]The temperature probe is made from food grade stainless steel and is safe to use as a BBQ accessory. The stainless steel cable can withstand temperatures up to 718°F (380°C) and the temperature probe can withstand temperatures up to 1000°F (500°C) [Specifications]4.1 ft. stainless steel cable. 7 in probe length, 6 in probe tip to R angle, 0.2 in probe diameter, 0.4 in probe tip. The plug is 0.14in diameter and 0.55 in length. The probe is curved (R 25°). [Package Contents]2 x temperature meat probes and 2 x stainless steel probe clips and 2 x probe grommets.To prolong the life of the temperature probe, we recommend that you clean it with a rag after use. Colour:Silver Material:Stainless steel Package Contents: 2 x temperature meat probes 2 x stainless steel probe clips 2 x probe grommets Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

    Fruugo United Kingdom

  10. Uniden Sporticar Scanner UBC180XLT 100 Channel Handheld Twin Turbo

    The scanner is in used condition with some signs of wear. The scanner is untested, therefore it cannot be confirmed whether this device works on not, please purchase with this is mind. I believe it is also missing a screw on Ariel on the top. Please properly view the photos provided to gain better understanding of the condition of the scanner.

    eBay

  11. Programmable Digital Time Switch Relay Timer Control AC 220V 16A

    Perfect for household use in DB Boards 3500 Watt / 16 Amps 24 hours / 7 days a week programmable Built-in rechargeable Battery for backup the memory when power failure Auto time error correction +/- 30 sec, weekly Repeat programs with 17 on/off settings, and setting on/off manually Technical Data: Model:TM919A-2 220V AC Temp.range: -20°C+50°C Power consumption 4.5 VA (MAX) Display: LCD Switching contact: 1 changeover switch Programs:16 on/off each day or week Hysteresis 2 sec/day (25°C) Mini interval: 1min Capacity: 16(8) 250V AC Black-out: 60 days Timer range: 1min~168hr Recharge battery: 1.2V 40Ma Average error: 1s/24h, 25°C Colour:White Material:Plastic Package Contents: 1x Timer Switch TM919A Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

    Fruugo United Kingdom

  12. Uniden Bearcat 360 CLT Wideband Scanner with power adapter

    eBay

  13. Temperature Probe Kit Replacement,For Masterbuilt Gravity Series

    SCOPE OF APPLICATION - Perfectly compatible with Masterbuilt Gravity Series560/800/1050 XL Digital Charcoal Grills and MB20040122, MB20040220, MB20040221, MB20041020, MB20041220, MB20041320. TEMP PROBE PARAMETERS - Part Number: 9904190024. stainless steel probe, braided steel mesh lead, temperature range -60°F~900°F. Connects to thermostat leads for safe and convenient detection of your grill's internal temperature. PACKAGE - Includes temp probe and protective cover, screws and nuts. TIPS - Periodically cleaning the temperature probe with a mild dish detergent will ensure accurate grill temperature readings. Colour:Silver Material:Stainless steel Package Contents: 1 x RTD Probe Sensor Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

    Fruugo United Kingdom

  14. USB Programming Cable for Uniden SDS200E SDS200 Desktop Scanner digital DMR

    eBay

  15. Mini Fan Heater, Fan Heater Socket, Socket Heater, Fan Heater, 800 Watt,remote Control Au Plug walkbee SZRH A-F

    Mini Fan Heater, Fan Heater Socket, Socket Heater, Fan Heater, 800 Watt,remote Control Au Plug walkbeeHeating area: this space-saving 800 watt heater is plugged directly into a socket and takes up absolutely no space for quick heating. The maximum heating area is less than 20 square metres and is suitable for areas of 0 to 15 square metres. perfect for cold rooms such as bedrooms, playrooms, living rooms, basements, offices, garages etc. Two speed settings: one-touch wind switch with two speeds, press the power switch for three seconds to turn on and off. Appropriate design of convection channels to reduce wind noise and extend the heating area. Switchable between high fan speed of 800 W () and low fan speed of 400 W (LL). Easy to use: the standard working time of the ceramic fan heater is 12 hours, you do not need to press the button, press the time button to switch to the timer setting and press the "+/- button" to set the timer time. When the temperature reaches the set temperature, the device automatically switches off to avoid overheating. It turns on automatically when the temperature falls the set temperature. Energy-saving and quiet: with shell insulation, roll protection and overheating protection as well as automatic control and thermostat functions, it has a long service life, high energy efficiency and quiet operation, so you can save time and energy while keeping you warm and comfortable. Comfort and convenience: home electric heater with digital LED display, which can be rotated 180 to meet different conditions and air outlet positions. LED indicator light allows you to accurately control the temperature. Suitable for children, teenagers and the elderly. Plug Type:AU Plug,it applies to Australia and so on. Voltage:AC220V Colour:Gray & Black Material:Plastic Package Contents: 1 * Mini Fan Heater Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

    Fruugo United Kingdom

  16. UNIDEN BEARCAT UBC 125 XLTC SCANNER

    UNIDEN UBC-125 XLTC. Uniden UBC 125XLTC is a quality handheld scanner in a stylish compact design that is made from robust materials. Uniden UBC 125XLT is designed for indoor and outdoor activities in the professional world.

    eBay

  1. Previous Page (Page 5)Next Page (Page 7)