Top 5 Reasons to Get AdblueOBD2 Emulator for Trucks:1. ADBlueOBD2 is very easy to install. Just Plug it into OBD2 connector of truck or bus and remove the fuses mentioned. 2. ADBlueOBD2 will override ADBlue system instantly, it will stop the usage of adBlue liquid and disable Nox sensors. 3. Without any power loss of the engine or any warnings on the dashboard and in diagnostic system. 4. ADBlueOBD2 does not damage the engine and not cause any negative effects to the truck factory setting. 5. ADBlueOBD2 does not change any of the settings permanently. To turn back to the truck's original settings, just unplug adBlueOBD2 from OBD2 connector. AdblueOBD2 Emulator for Trucks AdBlueOBD2 is a Plug&Drive Ready device to mulate working adBlue systems and NOx sensors on trucks, which equipped with EURO 4/5/6 catalytic converter systems, even with damaged adBlue SCR system.dBlueOBD2 is easy to install. Installation and Calibration for Trucks: 1. Pull the Key out from the ignition. 2. Remove the following Fuses (For ) Terminal - 15 Terminal - 30 3. Plug adBlueOBD2 into OBD2 connector 4. Turn on the ignition and check the level of adBlue, if it shows 50% or 70%. 5. If any fault light appears on dashboard, delete via service scanner. Material:plastic colour:As shown Package Contents: 1 * adBlue OBD2 Emulator Box Interface Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
Estimated remaining times are shown for ECU flash operations. Diagnostic protocol contains interruptions of sessions, extended measurement values, improved ECU communication view,used diagnostic hardware, connection type of diagnostic hardware, , the used and submissions of support requests The measured value display has been improved. Documents in are displayed in separate . One message box be shown at the beginning of the test drive mode. hotfixes can be integrated during diagnostic sessions. 6154A DOIP Note: 1. Software is too large, the available capacity of the computer C drive should be at least more than 30G 2. Please install on WIN10/WIN11 3. It supports online function, but you need to get online account by yourself ! 4. extra THREE softwares as free gifts: - S V23.05 - Engineering V17.0.1 - ELSAWIN V6.0 (U Stick is S V23.01 with keygen and E V17.0.1 with keygen , you can use keygen to activate by yourself) Description: This new 6154a is the latest full system diagnostic and programming interface, which can read and clear code, dynamic data flow, programming,coding, and personalized settings,including maintenance information systems, technical briefings, circuit diagrams, component drawings, diagnostic guidelines, etc. 6154A DOIP Covered model: For : 1995Y-2023 MY+ For : 1995MY-2023 MY+ For Seat: 1995MY-2023 MY+ For : 1995Y-2023 MY+ For MAN: 1995MY-2023 MY+ 6154A DOIP Functions: Danger messages have been revised. Stopping of diagnostic sessions may be interrupted. Automatic deletion of autosave diagnostic protocols after successful transmission. Selection of PassThru diagnostic hardware has been improved. If you are not professional for technology, please don't buy this product. Colour:As Shown Material:Plastic Package Contents: 1 * 6154A DOIP CAN FD Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
EDIAG ELITE Supports Bidirectional Control Function:Bi-Directional Control capability and is capable of performing Active Tests to access vehicle-specific subsystems and component tests. The tester outputs commands to the ECU to drive the actuators in order to determine the integrity of the system or parts by reading the ECU data, or by monitoring the operation of the actuators. For example , x431 v have the ability to actuate relays, injectors, coils, or perform system tests, etc. Also it actuate solenoids valve and actuators for active testing to identify the error easily moreover. The bidirectional functions are quite extensive. EDIAG ELITE Supports Full OBD2 Function:Reading Codes Show the detailed description of the Diagnostic Trouble Code (DTCs) Erasing Codes & Reset:Turns off Check Engine Light (), clears codes and resets monitors. Data Stream:Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data. Readiness Status:Shows whether the emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing. Read Live Data Stream:Show the information of continuous data stream from a vehicle in live graphic (waveform) display. View Freeze Frame Data:Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs. O2 Sensor Test:Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle's on-board computer. Read Vehicle Information Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number) Colour:As Shown Material:ABS Package Contents: 1 * Car OBD2 Diagnostic Tool Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
Brand Name:ANENGOrigin:Mainland ChinaItem Type:Cables, Adapters & Sockets
Fruugo United Kingdom
Type:New Vci 2021.11 Keygen on Cd Vd Colour:As Shown Material:ABS+Plastic Package Contents: 1 * Main unit 1 * Software CD 1 * USB cable 1 * Led obd2 cable 8 * car cables Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
For Yamaha Jet Ski 3-Pin OBD Female Diagnostic Cable Adapter 1. For connecting your Yamaha Jet Skis (Wave Runners) with USB-OBD2 scanner 2. Can read real-time engine data such as speed, RPM, temperature, O2 sensor data, emissions, voltage, etc. to diagnose fault codes 3. For YAMA-HA diagnostic kit Wave Runners, Outboards, Jet Boats YDS system cable, no software Applicable Outboard Engines (North American Models): Z150, LZ150, VZ150, Z175, VZ175, Z200, LZ200, VZ200, VZ200-2, Z225, VZ225, Z250, LZ250, VZ250, Z300, LZ300, VZ300, VZ300, VZ300 , VZ300, VZ300, VZ300, VZ300, VZ300, VZ300, F30, F40, F50, T50, F60, T60, F70, F75, F90, F115, LF115, F150, LF150, F200, LF200, VF200, F225, VF225, F25 0, LF250, VF250, F250B, LF250B, F300, LF 300, F350, LF350 Applicable outboard engines (global models): Z150P, LZ150P, Z150Q, Z175G, Z175H, Z200N, LZ200N, Z200P, Z200Q, Z200R, Z225H, Z250D, Z250D, Z300A, LZ300A, LZ300A, Z300D, F30B, F40F, F50F, FT50G, F60 C, FT60D, F70A, F75B, F80B, F90B, F100D, F115A, FL115A, F150A, FL150B, F200A, F225A, FL225A, F225F, FL225F, F250A, FL250D, F300A, FL300B, F350A, F350A, F300B, F300B Water jet boats: SR230, SR230 HO, SX230, SX230 HO, AR210, AR230, AR230 HO, SX210, 212X, 212SS, 232 LIMITED, AR240, AR240 HO, SX240, AR190, SX240, SX240 HO, 242 LIMITED
Fruugo United Kingdom
Product Features 1. Fully compatible with V W, Au di, Se at and Sko da models through the current model year, including models using a direct CAN connection for diagnostics. 2. Can use the new 7-Digit PIN/SKC codes to match new keys in all immobilizer equipped e-at/Sko-da models. 3. Can access all control modules which require proprietary VAG modes running the KWP-2000 protocols (2001+ Tevestou.60 ABS, numerous 2002+ modules), KWP6000 (CAN) and/or KWP7000 (UDS). 4. Completely revised and expanded ROD (ODX) Data. Including coverage for all the latest models of cars such as the new 4G-chassis Au di A6. The structure of our ROD data has also been revised to eliminate much redundancy and keep the installer size reasonable. 5. Support for new UDS addresses required for compatibility with new systems found in latest car models.Auto-Scans now show sub-system label file names. 6. EDC15-16 Mileage reading now includes support for some EDC15 V6 TDI ECUs. 7. Revised and expanded Label Files More than 350 new or revised files since the last dataset.New USB Drivers. 8.English and Russian. Note: 1.Pls turn off the Anti Software and disconnect internet before installing and using every time , because software was cracked version, can not recognized by Anti software, so some files will be reported to but in fact it is harmless and necessary to install ,If you worry about the will infect your laptop , pls do not buy this item. 2.No need change the PC date. If you don"t want to turn off the Antivirus software, you need add the related files to Trust in Antvirus software, so will not be deleted by it. 3.Systems required: (32bit/64bit) of Windows 7, Windows 8, Windows XP, Windows 10 (but not all Win10 can work). Not supported Windows on VM Systems (Parallels, Virtual Box, etc) br /> Attention 1.The CD may be easily broken on the way to destination, so if CD can"t be readable, please do contact us to send you download link, do not dispute or Negative for this. 2.About Update: Software can"t be updated 3.Compatible Cars: Support cars for v-w for au-di for se-at for sko-da 4.All cables we have tested before packing, but we can not guarantee it will work caompatable with every buyer"s Computer Systemsand Cars. 5.Not supports PC USB 3.0 , must be USB 2.0 Cable must be connected with car, then LED can be light 6.Pls turn off the Anti Software and disconnect internet before installing and using every time , because software was cracked version, can not recognized by Anti software, so some files will be reported to but in fact it is harmless and necessary to install ,If you worry about the will infect your laptop , pls do not buy this item. 7.No need change the PC date. If you don"t want to turn off the Antivirus software, you need add the related files to Trust in Antvirus software, so will not be deleted by it. 8.Systems required: (32bit/64bit) of Windows 7, Windows XP, Windows 10 (but not all Win10 can work). Not supported Windows on VM Systems (Parallels, Virtual Box, etc) br /> Support for newer 2018 models Compatibility with the latest VAG Models Long Coding Assist (LCode) updated Special Functions for V W (7P) EPB Windows 10 Compatibility Revised and expanded Label Files. Package list: 1x HEX-V2 USB Interface 1 x CD Software
Fruugo United Kingdom
A 5.8GHz glasses receiver with two built-in receivers, which analyze and fuse the signals in real time by means of a separate chip to the best picture stability and clarity. It maintains adequate visual picture even in poor signal environment. It supports 6 frequency bands, a total of 48 frequency points and is compatible with all series of FatShark glasses. If you are an FPV enthusiast, this receiver provide you with the ultimate flying experience, allowing you to ride in the air. When your drone goes out of control and crashes, use the receiver's built-in seeker function to quickly locate the aircraft. Frequency and parameter, easy to adjust Equipped with an OLED screen and 5-way buttons, allowing you to easily realize frequency switching: parameter adjustment and other operations, to achieve a faster, smarter flight experience Quickly scan for the best signals with the Band Scanner feature, the Band Scanner feature scans all available channels and displays them as a bar graph on the OLED screen. This feature helps users to quickly find the channel with the strongest and most stable signal strength, especially in environments with high signal interference. Supply voltage: 5V Operating Current: 450mA@5V Support FPV glasses For Fat Dominator Series: Including V1,V2,V3,SE,HD1,,HD3,HDO, HDO2 For Orqa: The current factory housing does not support for Orga glasses, we designed 3D printed housing that can be used for Orqa series glasses, it supports for Orqa's FPV.One, FPV.One Pilot, FPV.One Race. For HDZero: Supports the for HDZero FPV glasses analog adapter module. For : Supports for V1, V2 glasses (adapter boards need to be purchased separately when using glasses). Working Frequency: Support A,B,E,F,R,L bands, frequency from 5.3GHz-5.9GHz totaling 48 frequency points. The product appearance and printed words depending on the batch, but this does not affect use. Colour:As Shown Material:ABS Package Contents: 1 * receiver with accessories Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom