search results

  1. UPA USB Programmer Diagnostic Tool V1.3 for 2014 Version Main Unit

  2. ✈Auto Diagnostic Tool ECU Programmer UPA‑USB Fault Detector Code Reader OBD2

    Insert the correct config key into the slot of the mainboard and start programming either via the ZIF or SOIC Socket. Pick the Adapter you want to use, attach the flat cable to the Adapter (PIN1 is always indicated, on both the cable and also the Adapter) and also to the main board's 10pin ISP connector.

    eBay

  3. Markenlos Upa Usb Programmer Diagnostic-Tool Upa- V1.3 With Adapter

  4. Markenlos Upa Usb Programmer Diagnostic-Tool Upa- V1.3 With Adapter

  5. UPA-USB Automotive ECU Programmer USB V1.3 Full Adapters With NEC Functions New

    You can also use the supplied DIL to 10-pin flat ribbon header by placing it inside the ZIF socket and connecting a SOIC clamp or clip for use by the ISP. Select the adapter you want to use and connect the flat cable to the adapter (both the cable and the adapter are labelled PIN1) and to the 10-pin ISP connector on the motherboard.

    eBay

  6. Markenlos Upa-Usb .3 Sn : 050D5a5b Ecu Chip Tunning Tool

  7. UPA USB Programmer for 2014 Version Programmer v1.3 Simplified VersionBDUL

    USB driver upausb.sys is digitally signed. Updated script example files. Fixed bug with 68hc11 reading if Oscillator is not set to Auto. Fixed bug with script functions ProgramDevice, ReadDevice. when used with PICs.

    eBay

  8. Upa Usb Programmer Diagnostic-Tool Upa- V1.3 with Adapter

  9. 2020 UPA-USB V1.3 SERIAL EEPROM PRAGAMMER READ + WRITE

    OR TO READ 95128 FEM/BDC EEPROM TO USE WITH VVDI2 FOR BMW KEY MAKING (OBVIOUSLY THIS IS NOT A KEYMAKER BUT WOULD HELP WHEN THE KEYMAKERS ASK FOR EEPROM DUMP, YOU COULD READ USING UPA-USB). NEVER DESTROY A DASHBOARD AGAIN AS YOU WILL ALWAYS HAVE THE ORIGINAL EEPROM DATA.

    eBay

  10. Markenlos Upa Usb Programmer Diagnostic-Tool Upa- V1.3 With Adapter

  11. UPA to USB Automotive ECU Programmer USB V1.3 Full Adapters With NEC Functions

    You can also use the supplied DIL to 10-pin flat ribbon header by placing it inside the ZIF socket and connecting a SOIC clamp or clip for use by the ISP. Select the adapter you want to use and connect the flat cable to the adapter (both the cable and the adapter are labelled PIN1) and to the 10-pin ISP connector on the motherboard.

    eBay

  12. Markenlos Upa Usb Programmer Usb V1.3 Sn 050D5a5b Main Unit Ecu Chip Tuning

  13. 〡UPA USB V1.3 ECU Programmer Main Board ECU Chip Tunning Tool With Full Adapter

    Insert the correct config key into the slot of the mainboard and start programming either via the ZIF or SOIC Socket. Pick the Adapter you want to use, attach the flat cable to the Adapter (PIN1 is always indicated, on both the cable and also the Adapter) and also to the main board's 10pin ISP connector.

    eBay

  14. UPA USB Programmer Diagnostic Tool V1.3 for 2014 Version Main Unit

  15. UPA USB Programming with Full Adaptors Support NEC Function Software V1.3

    Insert the correct config key into the slot of the mainboard and start programming either via the ZIF or SOIC Socket. Pick the Adapter you want to use, attach the flat cable to the Adapter (PIN1 is always indicated, on both the cable and also the Adapter) and also to the main board's 10pin ISP connector.

    eBay

  16. NeznaäKovã© Upa Usb Programmer Diagnostic-Tool Upa- V1.3 With Adapter

  17. .›UPA USB V1.3 ECU Programmer Main Board ECU Chip Tunning Tool With Full Adapter

    Insert the correct config key into the slot of the mainboard and start programming either via the ZIF or SOIC Socket. Pick the Adapter you want to use, attach the flat cable to the Adapter (PIN1 is always indicated, on both the cable and also the Adapter) and also to the main board's 10pin ISP connector.

    eBay

  1. Next Page (Page 2)