1 Finding PIN Code, preparing precoded transponders and programming transponders from EEPROM and MCU. 2Transponder Cloning: 11, 12, 13, 33, 73, 4C (writing to 4C electronic key and battery less TPX1 transponder), for Philips Crypto 40 (some), 41(all), 42(all), 44(all unlocked VAG), 45(all). 3 Producing Transponders for OBD Programming. 4 Hitag2 Transponder Programmer. 5 Easy Use with Wide Graphic LCD Screen.
Fruugo United Kingdom
Features: - BQ series battery debugger modifier - Upgrade electrostatic protection - Upgraded version: Add static protection for each output. Support IIC, SMBUS, HDQ communication. with power indicator, communication indicator and USB data status indicators - Fully compatible: compatible with the original EV2400 and EV2300. Built-in 4.7K pull-up, no external pull-up resistor is required - Software support: Support official software. It can be used to read and write battery metering chip of BQ series, read, unlock, modify the parameters of notebook batteries and drone batteries for DJI, and other types of development - Provide network transmission driver and supporting software - Size: 74 x 44 x 15mm/2.9 x 1.7 x 0.6" Tips: Please allow 1-3cm error of measurement. Photo color might be a little different from the actual product due to color display of different monitors. Product Includes: - 1 x Debugger Host - 1 x USB Data Cable - 10 x Female to Female Dupont Cables 20cm/7.9" - 5 x Male to Male Dupont Cables 20cm/7.9
Fruugo United Kingdom
1. Built-In High-Frequency Antenna, Corresponding To The Antenna Depth, Eliminates Blind Spots, And Reads The Entire Data Card Without Interruption. 2. Increase The Frequency Of Keystrokes, The Size Of The Card Can Hold Everything. The Data Analysis Is Completely Stable And The Error Rate Is Low. 3. The Low-Frequency Antenna Improves The Signal-To-Noise Ratio, The Recognition Speed Is Higher, And The Mobile Design Meets Needs. 4. No Antenna Interface, No Need To Connect, Easy To Damage. 5. It Is Simple And Convenient To Cancel The Lithium Battery. (In Offline Mode, You Can Use The Power Bank) Material: PC+Metal colour: black Package Contents: 1 x RFID Card Reader Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
Integrated level conversion chip, directly read and write 5v, 3.3v, 2.5v, 1.8v chips Integrated infrared code measurement module.Supports programming 24, 25/26, 93, 45, 95 chips, and ours also supports ec data reading and writing of kb9010 kb9012 kb9016 kb9018 kb9022 The software is , you can add the chip type yourself, or the software source code, so you ' be stuck by others TTL can support up to 1.8v level, suitable for occasions. Read and write status light, TTL status light Support TTL self-check. Support to open cap files directly. In the locking part, 24xx add a strong pull-down resistor, 25xx add a pull-up resistor Material: PC+Metal colour: As shown Package Contents: 1 x ch341a programmer Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
Features: Power Source: 6V - requires only 4 AA batteries per receiver. Range:150meters. Each receiver with the antenna. Fully programmable - make any or all receivers to any button on any system remote. If you want to programmer the receiver, please put in a small stick on the hole which is on the receiver box. And then the light on the receiver box will be flash-then press corresponding key on the remote. Then the receiver will work with the remote. Expandable - Add other receivers (available individually) to expand number of cues. Interchangeable & Economical: If one receiver has a little problem after used for a period, you could use others instead. Or you just need to buy the receiver, no need to buy the remote. Specification: Material: Plastic Weight: 265g/9.3oz Frequency: 433MHz Transmitter Power Source: 12v 23A battery (NOT included) Receiver Power Source: 4*AA batteries (NOT included) Keys Quantity: 12pcs Range:150m/5905.5inch Package List: 1 x Remote Controller 1 x Receiver 1 Set x Connecting Line Note: 1. Handle your product with care avoid shaking and dropping it. 2. Keep the receiver as far away from your fireworks as possible to avoid damage. 3. Please remove batteries before storage, for prevent defile incept box. 4. Please do not place the product in the damp, sour, alkali and pollution environment. 5. All the systems are NOT including batteries.
Fruugo United Kingdom
SM2 PRO 1.20 Supports 67 Modules to open protocols: Activate Licenses 12,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,29,30,31,32,33,34,35,36,38,40,42,43,45,46,47,48,50,52,53,54,55,56,57,58,59,60,61,62,63,64,65,66,67,68,69,70,71,72,73,74 Above total 67 modules, support thousands of car , read and write ECU and GearBox ,power upgrade tool,clone ECU to read and write. Best chip tuning tools ! Software Version 1.20 Suppors 69 Modules 67 in 1 Active Licenses Important update: 1:Bench cable SM2 PRO+ Bench cable with switch: Gold-plated PCB transparent blue shell 1. New SM2 PRO+ bench cable with Kline. it can write the old and which car with LLINE. 2. The bench cable with switch so that power supply can be controlled manually and automatically, and it is not easy to burn. Colour:Photo Color Material:plastic Package Contents: 1 x Chip Tuning Tool set Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
Language: English.Hardware Version: V2014; Software Vesion: V1.3 UPA SN 050D5A5B UPA USB 1.3 Test Cable Adapter for UPA USB Programmer V1.3 ECU Pinout Diagnostic Connectors Compatible with UPA-USB Programmer S - New Version Compatible with: UPA-USB V1.3 Compatible with: UPA-USB Programmer S - New Version UPA-USB Device Programmer V1.3 Update : Added MC9S12HY64/HA32 support Added Serial Flash memory support: A25L512/010/020/040/080/016/032, SST25VF512A/010A/020B/040B/080B/016B/032B, S25FL004A/008A/016A/032A/064A Added 24C1024, 24C1025 support Added Bulk erase data memory to PICs 16F913-7/946, 12F629/675 Added script function GetPage Added script function AutoBaudRateDevice (hc08 devices only) Added script function GetProgrammerFrameChildCtrl( AChildCtrlName: string): TControl Added script function EnablePicMemoryAreas ( AProgram, AID, AConfig, ACalibration, AEEPROM: boolean ): boolean; Fixed bug with script functions ProgramDevice, ReadDevice ... when used with PICs Fixed bug with SetHC08SecurityBytes (SecBytes: string) function Fixed bug with 68hc11 reading if Oscillator is not set to Auto Updated script example files Note: Installation guide not included, we strongly recommend you professional installation. Please check as much as possible to make sure the item is what you need. Tips: The product may be updated constantly ,Due To Different Batches, The Actual Product May Have Slight Differences Or Color Differences, Which Does Not Affect Use Colour:Photo Color Material:plastic Package Contents: 1 x UPA USB Programmer V1.3 set Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom
1. The upgraded version of the multi-function car ECU brush writing test stand can be installed with a quick programming adapter plate, 2. convenient for the user to connect to the ECU's quick programming interface, 3. realize the ECU brush writing programming quickly and stable. The upgraded version of the multi-function car ECU brush writing test stand can be installed with a quick programming adapter plate, which is convenient for the user to connect to the ECU's quick programming interface, and realize the ECU brush writing programming quickly and stably. It can be perfectly matched with mainstream devices such as and KTG.The upgraded version of the multi-function car ECU brush test stand function can be widely used in car ECU brush write data, tool modification upgrade programming, car key read and write programming, remote control programming, VVDl programming and other test functions. Colour:black Material:Plastic Plug Type:US Plug,it applies to Canada, India,Mexico, Thailand, the , the Philippines,Taiwan and so on. Voltage:AC100-240V The actual product may have slight color difference or difference, which not affect the use Package Contents: 1 x LED BDM Frame 4 x Probes 1 plug Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Fruugo United Kingdom