TM TELE TELESCOPIC PROJECTOR CEILING MOUNT Universal projector ceiling mount with telescopic pole Overall length 440 735 mm Full adjustment: tilt at top for sloping ceilings pitch and roll at the bottom The TM TELE Techmount is a projector ceiling bracket for anchoring any data projector safely to a ceiling. The telescopic design allows fast deployment and adjustment without the need cut and drill the pole. It has a greater range than most other telescopic mounts and the pole can be removed for flush mounting the projector as close to the ceiling as possible. Note: unlike the TM 1200 the length of this bracket cannot be extended. One Man InstallationThoughtful design detail include a length adjustment clamp system which requires only one hand. Sloping CeilingsA tilting mechanism is included which tilts to a full 90 degrees, allowing you to use the bracket as a boom if need be. Safety ApprovedA back up fall arrest tether is included which secures the projector to your bracket, and the pole has a mechanical stop so that the two parts of the pole cannot be separated. Vision recommends a maximum safe working load of 10kg which is well within the limits of the product and meets the BSi installation standard specification (PAS122:2009). Easy fitProjectors have threaded inserts in the bottom for attachment but not all use the same diameter screws so Vision includes a selection to suit most projectors. Simply locate the spider arms on our bracket over the attachment holes, and insert a screw into the projector. Obstruction free Cable ManagementVision s unique chute through system leaves cable access clear even for big VGA connectors. Tools IncludedA spanner and pin hex key are included. Vision also includes a hex key bit for a power drill to speed up installation. SecureQuick release mechanisms make life easier for thieves, so the TM TELE is secure and features security bolts. Specifications BOX DIMENSIONS: 393 x 150 x 80 mm PACKAGED WEIGHT: 3 kg SAFE WORKING LOAD: 10kg COLOUR: Satin White ACCESSORIES INCLUDED: 1 x H50 Pin Hex key1 x 17mm Spanner4 x M3 43mm screws4 x M4 43mm screws4 x M5 43mm screws4 x M6 43mm screws4 x M2.5 43mm pan slot4 x M8 50mm Ceiling Fixtures with raw plugs1 x Safety Tether1 x Ceiling Trim Disc WARRANTY: 2 year return to base
AV Parts Master
2 pcs x Hafele Kitchen Worktop Connecting Bolt - Easy Fit 262.96.990. Order qty: 1 pair (2 pcs ). Get In Touch. Browse Range. Over 10k Products Available. - 2 x bolts. View All Products. Hand Tools.
eBay
RA 55 65 Floor Stand. Fixed Floor Stand for Flat Screens between 55 65 inch diagonal size maximum weight of 75 kg (other sizes available) Ideally suited for applications when the walls of the building are not capable of supporting the weight of a Flat Screen. The rigid steel construction of this stand makes it ideal for use with Touch Screens which are heavier than conventional flat screens. The majority of the screens weight is directed to the floor not the wall itself. A flat screen can be mounted on the stand at various fixed height settings (please see dimensions below). The central upright support tower is hollow box section design to enable all connection cables to be concealed inside and ensure a very neat tidy appearance with a cable entry exit hole positioned at the rear base of the tower. The flat screen can be fitted in Landscape or Portrait format. All our Fixed Floor Stands come complete with a full fitting kit including floor anchor bolts with bolt head cover caps Wall Strap Brackets to eliminate any movement when used with a Touch Screen. Extended Wall Strap Brackets are available to span wall mounted Network Trunking. A Height Adjustable Shelf for a laptop or Media Source Devices such as DVD or Blu Ray Players is available as an Optional Extra and is positioned on the front of the stand under the screen at the required height. Product Dimensions. Height from floor to top of tower 1500mm. Width of tower at widest point 230mm. Floor Plate 590mm x 260mm with 5 fixing points. Floor to maximum centre of screen point 1410mm. Floor to minimum centre of screen point 1225. Finished in durable Black White or Grey powder coating. Weight shown is not including RA LCD Mount or Optional Height Adjustable Shelf. Please Note : AN RA FLAT SCREEN LCD MOUNT SUITABLE TO THE VESA MOUNTING MEASUREMENTS OF THE SCREEN BEING FITTED IS REQUIRED TO ACCOMPANY THIS STAND. THIS IS NOT INCLUDED IN THE PRICE OF THE STAND.
AV Parts Master
Eliminate the need for surface mounted worktop joints. 1x Bolt for 150 mm installation. Supplied with. Product Features.
eBay
TM ST2 Short Throw Projector Wall Mount Telescopic boom 930 1530mm (centre of projector to wall) Projector can be mounted at any point along boom Adjustable boom incline The Techmount ST2 supports 99 of short throw and ultra short throw projectors with no extra parts required. It is a strong, flexible mount which uses Vision s universal spider fitting to attach projectors. Long BoomThe boom is up to 1530mm long enough for short throw projectors to project an image 2000mm wide. The spider can be mounted at any point along the boom. TelescopicThe two part boom allows easy adjustment of image size. Cables are dropped down the pole during assembly. The pole which fits to the wall bracket is 800mm long, and the outer pole is 900mm long. Gradient AdjustmentA flexible wall plate allows the installer to alter the slope of the boom to offset the weight of heavy projectors. Projector TiltThe TM ST2 allows plenty of roll adjustment. Fine AdjustmentThe wall plate gives the installer some fine tuning adjustment of the boom up and down and side to side. Security BitThe TM ST2 uses pin hex security bolts which require a bespoke hex key. Vision includes a pin hex drill bit to help assemble the product quickly using a power drill. One Person InstallationThe modular design makes it simple to fit quickly. Just fix the wall mount in place, fit the boom, then attach the projector. SpecificationsBOOM LENGTH: 930 1530mmWALLPLATE FOOTPRINT: 250 x 152 mm (height x width)BOX DIMENSIONS: 1160 x 160 x 115 mmPACKAGED WEIGHT: 5.6 kgSAFE WORKING LOAD: 10kgCOLOUR: Satin WhiteACCESSORIES INCLUDED:1 x H50 Pin Hex key1 x 17mm Spanner4 x M2.5 43mm pan slot for Optoma Acer4 x M3 43mm screws4 x M4 43mm screws4 x M5 43mm screws4 x M6 43mm screws4 x M8 50mm Wall Fixtures1 x Wall Plate Cover1 x Boom End Cap1 x Safety Fall Arrest Tether WARRANTY: 2 year return to base
AV Parts Master
2 x Worktop Connector Bolts. Kitchen & bathroom worktop installations. Secure your surfaces like a pro with thiseasy-fit worktop connector kit – precision-engineered for clean, strong countertop joints!
eBay
RA Slimline Boom Mounting Set designed for mounting either behind or above the Whiteboard Standard boom arm length 1.5m or 2.8m and supplied with 5 x M10 x 60mm anchor bolts metal Whiteboard Rail not supplied Dimension of Boom Wall Plate 35cm high x 20cm wide Weight in total 9.26kg The picture shown has reduced boom arm length for photographic purposes only.
AV Parts Master
Supplied with: 1 Bolt & 2 Brackets. Screw in place and tighten to get a sturdy tight seal. Finish: Galv Steel. Material: Steel. Installation: Screw Fixing. We aim to respond within 24 hours and greatly appreciate kindness and patience towards our hard-working team.
eBay
RA Atlas3 FS Floor Stand for Flat Screens upto 75 inch maximum weight of 75 kg with a maximum VESA of 800x600 (for larger screens please see RA Atlas4 FS). Suitable for Smart, Clevertouch, Ctouch, Promethean ATP, Philips, Samsung, LG, Panasonic, BENQ, iTouch, Vividtouch, Hitachi, Iiyama, iBoard, Genee Screens and many more. Ideally suited for applications where the walls of the building are not capable of supporting the weight of a Flat Screen. The rigid steel construction of this stand makes it ideal for use with Touch Screens which are heavier than conventional flat screens. The weight of the screen is directed to the floor not the wall itself. The stand can be fixed to the floor or if the floor cannot be drilled, fixed using four Wall Support Brackets The flat screen can be mounted on the stand at various fixed height settings (please see dimensions below). The central upright support tower is hollow box section design to enable all connection cables to be concealed inside and ensure a very neat tidy appearance with a cable entry exit hole positioned at the rear base of the tower. The flat screen can be fitted in Landscape or Portrait format. Our Floor Stands come complete with a full fitting kit including floor anchor bolts with plastic caps, or with four Wall Support Brackets if not being fixed to the floor. Extended Wall Strap Brackets are available to span wall mounted Network Trunking. A Height Adjustable Shelf for a laptop or Media Source Devices such as DVD or Blu Ray Players is available as an Optional Extra and is positioned on the front of the stand under the screen at the required height. Product Dimensions. Height from floor to top of tower 1500mm. Width of tower at widest point 230mm. Floor Plate 590mm x 260mm with 5 fixing points. Floor to maximum centre of screen point 1380mm. Floor to minimum centre of screen point 1200. Finished in durable Satin Black powder coating. Weight shown is not including RA LCD Mount or Optional Height Adjustable Shelf.
AV Parts Master
Worktop Connecting Bolts, Length 150 mm, Galvanized Steel. The bolt will be held in place by the wings on the nuts at either end, ensuring the bolt can be screwed into position using a spanner.
eBay
RA Media Mate Monitor Mobile Our Single Lift Electric Height Adjustable Trolley. Suitable for most Large Flat Screens and Interactive Touch Screens up to 75 inch diagonal and 90kg from manufacturers including Clever Touch, Ctouch, Smart, Genee, Promethean, Benq, Samsung, LG and many more.Standard features include, Rigid Trolley Base with 5 Caster Wheels (2 Locking Type), Wired Remote Control Handset, VESA mounting up to 800 x 600, two accessory power sockets, 500mm of smooth and progressive lift action from lowest to highest screen positions.An Optional Extra Laptop Shelf for below the front of the screen is available.This trolley also offers a choice of height settings for the VESA Mounting Plate to be fixed at to enable the screen to be positioned lower when being used by children or smaller users or higher when used by adults.Screen Height Adjustment Settings.With the VESA Mount fixed in its LOWEST position on the trolley, the CENTRE of the screen will be approximately 1000mm from floor level when the trolley is in its LOWEST position.When fixed in its HIGHEST position, the CENTRE of the screen will be approximately 1500mm from floor level.With the VESA Mount fixed in its HIGHER position on the trolley, the CENTRE of the screen will be approximately 1120mm from floor level when the trolley is in its LOWEST position.When fixed in its HIGHEST position, the CENTRE of the screen will be approximately 1620mm from floor level.Trolley Base Dimensions. Front across outer most points 840mm. Rear across outer most points 720mm. Rear edge to front outer most points 642mm.A full fitting kit for the screen including bolts and washers are included with each trolley.This product has a 3 year RTB Warranty.Weight 46kg
AV Parts Master
KITC HEN WORKTOP EDGING STRIP E ND CAP, CORNER JOINT & STRAIGH T JOINT 40mm & 30m. WORKTOP BOLTS. Can be cut down at the wall end to suit the width of your worktop. END CAP - This is used to finish off the flat edge of a worktop.
eBay
RA5.8 Extra Large Universal Fitting Mount for large projectors upto 40kg. This mount has an articulated locking 50mm sleeve fixing for ease of positioning the projector once mounted. Manufactured with 3mm mild steel with 6 x 150mm Long x 25mm Wide Steel Countersunk Fixing Legs screw pack. Supplied with Metric M4 M6 countersunk allen head slot bolts for fixing the legs to the projector. The Mounting Grid is 420mm Long x 335mm Wide. Finished in durable Black or White Powder Coating. Please see image above for maximum span of the 6 legs for projector mounting points. Weight. 3.9kg
AV Parts Master
Steel Construction. 150 mm Long. Zinc Plated.
eBay
Chief upgraded fixed wall mounts based on installer feedback and direct observations of installers in the field. Many new features join Fusion favorites like Centerless shift, ControlZone leveling adjustment and ClickConnect Latching. New benefits included added stability, faster install, improved lateral shift, easier cable management and enhanced security. Installer inspired Fusion fixed mount solves top flat panel installation problems, offering flexible adjustments for large displays with a low profile display mounting solution. Integrated teardrop design speeds up wall plate installation by allowing pre installation of the bolts to the wall ControlZone Leveling for post installation fine tuning of height and leveling Centerless Shift provides up to 12.9 (327 mm) of post installation lateral shift for limitless centering Set screws keep the mount rigid, stable and secure throughout the life of the installation ClickConnect offers an audible click when the screen safely engages with the mount Built in cable stand provides easy access under the screen A full line of accessories can be installed with the mount and the entire unit can be adjusted together Multiple installation options for various stud distances Exclusive nesting spacers can be stacked to achieve any depth Quick Store Cords use magnets to easily store and access pull cords Improved cable management with new end caps Integrated Security Ships with a custom hardware kit that can be hung from mount rails if installing in stages Easy Open box with less waste to throw away
AV Parts Master
Steel Construction.
eBay