Take your work to new heights with this 23.8-inch FHD monitor featuring brilliant colour coverage, ComfortView Plus, USB-C and Ethernet connectivity.
AV Parts Master
eBay
The celexon UHD Optical Fibre HDMI cable is HDMI 2.1 compliant and thus transmits signals at up to 48 Gbps with resolutions up to 8K (7680x4320p 60Hz with up to 12 bit colour depth) and 4K (4096x2160p 120Hz with up to 12 bit colour depth).The hybrid fibre optic cable with 4 glass fibres and 8 copper wires enables interference free transmission of high data rates even over very long distances. For this purpose, the electrical signal in the 'Source' connector is converted into light pulses, which are transmitted via the optical fibres to the 'Display' connector, where they are converted back into an electrical signal. It is therefore important that the installation direction of the cable is correct.celexon's cable is very thin with a diameter of 5.5 mm. With a bending radius of max. 30 mm and 10 circuits over the entire cable, it offers a very high degree of flexibility during installation. The very thin and narrow connector allows the cable to be plugged in even in places that are difficult to access. In addition, no other nearby ports are covered by plugging in this connector.With the help of the new dynamic HDR (High Dynamic Range) processes such as Dolby Vision and HDR10 , not only can a greater dynamic and colour range be displayed, making the picture more brilliant and rich in detail, the picture optimisation is adapted more individually to each picture, making even fast colour changes between large contrasts (e.g. picture change from white to black) more natural. Enhanced Audio Return Channel (eARC) is the new generation of ARC and is included in the HDMI 2.1 specification. This enhancement allows up to 32 audio channels to be transmitted with uncompressed 24 bit 192kHz data streams at up to 38 Mbps. This huge increase in bandwidth and speed means that all audio formats such as Dolby TrueHD, DTS HD Master Audio, Dolby Atmos and DTS:X can be transmitted without compression. Another feature of this cable is the Automatic Low Latency Mode (ALLM), which will be of particular interest to gamers. This reduces delays by removing the advanced video processing and thus offers the fastest possible response of the display.The prerequisite here, in addition to the ALLM enabled TV, is that the source devices provide a high quality video signal that can be played back immediately by the display. Thus, there should be no perceptible delay between the keystroke on the controller and the reaction time in the picture. This enables an even more direct and precise gaming experience. All connected and ALLM capable devices automatically switch to the appropriate mode with the shortest possible latencies via handshake. Even with an interconnected AV receiver, no additional settings need to be made. Variable Refresh Rate (VRR) is another feature that the HDMI 2.1 specification brings with it. Here, the refresh rate of the source device and the output device is synchronised in order to avoid jerkiness and tearing in the picture.The refresh rate can move freely in the range between 30Hz and 144Hz and adapt optimally in order to reproduce images that are free of interference and as sharp as possible.Without VRR, parts of the picture can overlap and several parts of the picture build up one after the other (screen tearing), for example in video games. An alternative to avoid these artefacts without VRR would be to reduce the frame rate completely or to set a lower resolution, whereby the quality of the picture would suffer greatly. The additional Ethernet channel makes it possible to connect Internet capable AV components to the in house network only via HDMI cable. It is sufficient if the TV is connected to the network via cable, the AV receiver or Blu Ray player then receives the network via HDMI cable. This eliminates the need for a network switch and additional cables. All celexon UHD HDMI fibre optic cables are individually tested for functionality using high quality measuring equipment. Special attention is paid to the EBR (Error Bit Rate) and only cables with maximum data transmission are sold.KEY INFORMATIONHDMI A plug to HDMI A plugStandard: Ultra High Speed HDMI with Ethernet HDMI 2.1 compliantTransmission rate: 48 GbpsMax. Resolution: 8K 7680x4320p 60Hz 4:2:0, 4K UltraHD 4096x2160p 120Hz 4:4:4Supported colour spaces: Deep Colour, x.v.Color .Supported audio standards: eARC, Dolby TrueHD, DTS HD Master Audio, Dolby Atmos, DTS:XOther features: HEC (HDMI Ethernet Channel), CEC (Consumer Electronic Control), ALLM (Auto Low Latency Mode), VRR (Variable Refresh Rate), 3D, HDCP 1.4 2.2 2.3, EDIDEMI FreeNo external power supply necessary 350 mW (max.) power consumptionConnector: gold plated contactsCable: hybrid cable with 4 glass fibres and 8 copper wires, PVC (LSZH) sheath with 5.5 mm Diameter, max. 30 mm bending radiusCable colour: BlackCable type: RoundCable length: 30mREACH, RoHs compliant IN THE BOX1x celexon UHD Optical Fibre HDMI 8K 48Gbps Active Cable 30m, black All components used must support this feature.
AV Parts Master
Vintage Xircom CreditCard Ethernet 10/100 Upgradable CE3-10/100 PCMCIA PC Card
eBay
The celexon UHD Optical Fibre HDMI cable is HDMI 2.1 compliant and thus transmits signals at up to 48 Gbps with resolutions up to 8K (7680x4320p 60Hz with up to 12 bit colour depth) and 4K (4096x2160p 120Hz with up to 12 bit colour depth).The hybrid fibre optic cable with 4 glass fibres and 8 copper wires enables interference free transmission of high data rates even over very long distances. For this purpose, the electrical signal in the 'Source' connector is converted into light pulses, which are transmitted via the optical fibres to the 'Display' connector, where they are converted back into an electrical signal. It is therefore important that the installation direction of the cable is correct.celexon's cable is very thin with a diameter of 5.5 mm. With a bending radius of max. 30 mm and 10 circuits over the entire cable, it offers a very high degree of flexibility during installation. The very thin and narrow connector allows the cable to be plugged in even in places that are difficult to access. In addition, no other nearby ports are covered by plugging in this connector.With the help of the new dynamic HDR (High Dynamic Range) processes such as Dolby Vision and HDR10 , not only can a greater dynamic and colour range be displayed, making the picture more brilliant and rich in detail, the picture optimisation is adapted more individually to each picture, making even fast colour changes between large contrasts (e.g. picture change from white to black) more natural. Enhanced Audio Return Channel (eARC) is the new generation of ARC and is included in the HDMI 2.1 specification. This enhancement allows up to 32 audio channels to be transmitted with uncompressed 24 bit 192kHz data streams at up to 38 Mbps. This huge increase in bandwidth and speed means that all audio formats such as Dolby TrueHD, DTS HD Master Audio, Dolby Atmos and DTS:X can be transmitted without compression. Another feature of this cable is the Automatic Low Latency Mode (ALLM), which will be of particular interest to gamers. This reduces delays by removing the advanced video processing and thus offers the fastest possible response of the display.The prerequisite here, in addition to the ALLM enabled TV, is that the source devices provide a high quality video signal that can be played back immediately by the display. Thus, there should be no perceptible delay between the keystroke on the controller and the reaction time in the picture. This enables an even more direct and precise gaming experience. All connected and ALLM capable devices automatically switch to the appropriate mode with the shortest possible latencies via handshake. Even with an interconnected AV receiver, no additional settings need to be made. Variable Refresh Rate (VRR) is another feature that the HDMI 2.1 specification brings with it. Here, the refresh rate of the source device and the output device is synchronised in order to avoid jerkiness and tearing in the picture.The refresh rate can move freely in the range between 30Hz and 144Hz and adapt optimally in order to reproduce images that are free of interference and as sharp as possible.Without VRR, parts of the picture can overlap and several parts of the picture build up one after the other (screen tearing), for example in video games. An alternative to avoid these artefacts without VRR would be to reduce the frame rate completely or to set a lower resolution, whereby the quality of the picture would suffer greatly. The additional Ethernet channel makes it possible to connect Internet capable AV components to the in house network only via HDMI cable. It is sufficient if the TV is connected to the network via cable, the AV receiver or Blu Ray player then receives the network via HDMI cable. This eliminates the need for a network switch and additional cables. All celexon UHD HDMI fibre optic cables are individually tested for functionality using high quality measuring equipment. Special attention is paid to the EBR (Error Bit Rate) and only cables with maximum data transmission are sold.KEY INFORMATIONHDMI A plug to HDMI A plugStandard: Ultra High Speed HDMI with Ethernet HDMI 2.1 compliantTransmission rate: 48 GbpsMax. Resolution: 8K 7680x4320p 60Hz 4:2:0, 4K UltraHD 4096x2160p 120Hz 4:4:4Supported colour spaces: Deep Colour, x.v.Color .Supported audio standards: eARC, Dolby TrueHD, DTS HD Master Audio, Dolby Atmos, DTS:XOther features: HEC (HDMI Ethernet Channel), CEC (Consumer Electronic Control), ALLM (Auto Low Latency Mode), VRR (Variable Refresh Rate), 3D, HDCP 1.4 2.2 2.3, EDIDEMI FreeNo external power supply necessary 350 mW (max.) power consumptionConnector: gold plated contactsCable: hybrid cable with 4 glass fibres and 8 copper wires, PVC (LSZH) sheath with 5.5 mm Diameter, max. 30 mm bending radiusCable colour: WhiteCable type: RoundCable length: 10mREACH, RoHs compliant IN THE BOX1x celexon UHD Optical Fibre HDMI 8K 48Gbps Active Cable 10m, white All components used must support this feature.
AV Parts Master
eBay
The celexon UHD Optical Fibre HDMI cable is HDMI 2.1 compliant and thus transmits signals at up to 48 Gbps with resolutions up to 8K (7680x4320p 60Hz with up to 12 bit colour depth) and 4K (4096x2160p 120Hz with up to 12 bit colour depth).The hybrid fibre optic cable with 4 glass fibres and 8 copper wires enables interference free transmission of high data rates even over very long distances. For this purpose, the electrical signal in the 'Source' connector is converted into light pulses, which are transmitted via the optical fibres to the 'Display' connector, where they are converted back into an electrical signal. It is therefore important that the installation direction of the cable is correct.celexon's cable is very thin with a diameter of 5.5 mm. With a bending radius of max. 30 mm and 10 circuits over the entire cable, it offers a very high degree of flexibility during installation. The very thin and narrow connector allows the cable to be plugged in even in places that are difficult to access. In addition, no other nearby ports are covered by plugging in this connector.With the help of the new dynamic HDR (High Dynamic Range) processes such as Dolby Vision and HDR10 , not only can a greater dynamic and colour range be displayed, making the picture more brilliant and rich in detail, the picture optimisation is adapted more individually to each picture, making even fast colour changes between large contrasts (e.g. picture change from white to black) more natural. Enhanced Audio Return Channel (eARC) is the new generation of ARC and is included in the HDMI 2.1 specification. This enhancement allows up to 32 audio channels to be transmitted with uncompressed 24 bit 192kHz data streams at up to 38 Mbps. This huge increase in bandwidth and speed means that all audio formats such as Dolby TrueHD, DTS HD Master Audio, Dolby Atmos and DTS:X can be transmitted without compression. Another feature of this cable is the Automatic Low Latency Mode (ALLM), which will be of particular interest to gamers. This reduces delays by removing the advanced video processing and thus offers the fastest possible response of the display.The prerequisite here, in addition to the ALLM enabled TV, is that the source devices provide a high quality video signal that can be played back immediately by the display. Thus, there should be no perceptible delay between the keystroke on the controller and the reaction time in the picture. This enables an even more direct and precise gaming experience. All connected and ALLM capable devices automatically switch to the appropriate mode with the shortest possible latencies via handshake. Even with an interconnected AV receiver, no additional settings need to be made. Variable Refresh Rate (VRR) is another feature that the HDMI 2.1 specification brings with it. Here, the refresh rate of the source device and the output device is synchronised in order to avoid jerkiness and tearing in the picture.The refresh rate can move freely in the range between 30Hz and 144Hz and adapt optimally in order to reproduce images that are free of interference and as sharp as possible.Without VRR, parts of the picture can overlap and several parts of the picture build up one after the other (screen tearing), for example in video games. An alternative to avoid these artefacts without VRR would be to reduce the frame rate completely or to set a lower resolution, whereby the quality of the picture would suffer greatly. The additional Ethernet channel makes it possible to connect Internet capable AV components to the in house network only via HDMI cable. It is sufficient if the TV is connected to the network via cable, the AV receiver or Blu Ray player then receives the network via HDMI cable. This eliminates the need for a network switch and additional cables. All celexon UHD HDMI fibre optic cables are individually tested for functionality using high quality measuring equipment. Special attention is paid to the EBR (Error Bit Rate) and only cables with maximum data transmission are sold.KEY INFORMATIONHDMI A plug to HDMI A plugStandard: Ultra High Speed HDMI with Ethernet HDMI 2.1 compliantTransmission rate: 48 GbpsMax. Resolution: 8K 7680x4320p 60Hz 4:2:0, 4K UltraHD 4096x2160p 120Hz 4:4:4Supported colour spaces: Deep Colour, x.v.Color .Supported audio standards: eARC, Dolby TrueHD, DTS HD Master Audio, Dolby Atmos, DTS:XOther features: HEC (HDMI Ethernet Channel), CEC (Consumer Electronic Control), ALLM (Auto Low Latency Mode), VRR (Variable Refresh Rate), 3D, HDCP 1.4 2.2 2.3, EDIDEMI FreeNo external power supply necessary 350 mW (max.) power consumptionConnector: gold plated contactsCable: hybrid cable with 4 glass fibres and 8 copper wires, PVC (LSZH) sheath with 5.5 mm Diameter, max. 30 mm bending radiusCable colour: WhiteCable type: RoundCable length: 30mREACH, RoHs compliant IN THE BOX1x celexon UHD Optical Fibre HDMI 8K 48Gbps Active Cable 30m, White All components used must support this feature.
AV Parts Master
This Xircom 32bit CardBus Ethernet II 10/100 Card (Cbe2-100) is a PC Card (PCMCIA) Type II compatible LAN card. It is designed to provide high-speed Ethernet connectivity to your device. Had for years don’t have a network connection to test it.
eBay
The celexon UHD Optical Fibre HDMI cable is HDMI 2.1 compliant and thus transmits signals at up to 48 Gbps with resolutions up to 8K (7680x4320p 60Hz with up to 12 bit colour depth) and 4K (4096x2160p 120Hz with up to 12 bit colour depth).The hybrid fibre optic cable with 4 glass fibres and 8 copper wires enables interference free transmission of high data rates even over very long distances. For this purpose, the electrical signal in the 'Source' connector is converted into light pulses, which are transmitted via the optical fibres to the 'Display' connector, where they are converted back into an electrical signal. It is therefore important that the installation direction of the cable is correct.celexon's cable is very thin with a diameter of 5.5 mm. With a bending radius of max. 30 mm and 10 circuits over the entire cable, it offers a very high degree of flexibility during installation. The very thin and narrow connector allows the cable to be plugged in even in places that are difficult to access. In addition, no other nearby ports are covered by plugging in this connector.With the help of the new dynamic HDR (High Dynamic Range) processes such as Dolby Vision and HDR10 , not only can a greater dynamic and colour range be displayed, making the picture more brilliant and rich in detail, the picture optimisation is adapted more individually to each picture, making even fast colour changes between large contrasts (e.g. picture change from white to black) more natural. Enhanced Audio Return Channel (eARC) is the new generation of ARC and is included in the HDMI 2.1 specification. This enhancement allows up to 32 audio channels to be transmitted with uncompressed 24 bit 192kHz data streams at up to 38 Mbps. This huge increase in bandwidth and speed means that all audio formats such as Dolby TrueHD, DTS HD Master Audio, Dolby Atmos and DTS:X can be transmitted without compression. Another feature of this cable is the Automatic Low Latency Mode (ALLM), which will be of particular interest to gamers. This reduces delays by removing the advanced video processing and thus offers the fastest possible response of the display.The prerequisite here, in addition to the ALLM enabled TV, is that the source devices provide a high quality video signal that can be played back immediately by the display. Thus, there should be no perceptible delay between the keystroke on the controller and the reaction time in the picture. This enables an even more direct and precise gaming experience. All connected and ALLM capable devices automatically switch to the appropriate mode with the shortest possible latencies via handshake. Even with an interconnected AV receiver, no additional settings need to be made. Variable Refresh Rate (VRR) is another feature that the HDMI 2.1 specification brings with it. Here, the refresh rate of the source device and the output device is synchronised in order to avoid jerkiness and tearing in the picture.The refresh rate can move freely in the range between 30Hz and 144Hz and adapt optimally in order to reproduce images that are free of interference and as sharp as possible.Without VRR, parts of the picture can overlap and several parts of the picture build up one after the other (screen tearing), for example in video games. An alternative to avoid these artefacts without VRR would be to reduce the frame rate completely or to set a lower resolution, whereby the quality of the picture would suffer greatly. The additional Ethernet channel makes it possible to connect Internet capable AV components to the in house network only via HDMI cable. It is sufficient if the TV is connected to the network via cable, the AV receiver or Blu Ray player then receives the network via HDMI cable. This eliminates the need for a network switch and additional cables. All celexon UHD HDMI fibre optic cables are individually tested for functionality using high quality measuring equipment. Special attention is paid to the EBR (Error Bit Rate) and only cables with maximum data transmission are sold.KEY INFORMATIONHDMI A plug to HDMI A plugStandard: Ultra High Speed HDMI with Ethernet HDMI 2.1 compliantTransmission rate: 48 GbpsMax. Resolution: 8K 7680x4320p 60Hz 4:2:0, 4K UltraHD 4096x2160p 120Hz 4:4:4Supported colour spaces: Deep Colour, x.v.Color .Supported audio standards: eARC, Dolby TrueHD, DTS HD Master Audio, Dolby Atmos, DTS:XOther features: HEC (HDMI Ethernet Channel), CEC (Consumer Electronic Control), ALLM (Auto Low Latency Mode), VRR (Variable Refresh Rate), 3D, HDCP 1.4 2.2 2.3, EDIDEMI FreeNo external power supply necessary 350 mW (max.) power consumptionConnector: gold plated contactsCable: hybrid cable with 4 glass fibres and 8 copper wires, PVC (LSZH) sheath with 5.5 mm Diameter, max. 30 mm bending radiusCable colour: BlackCable type: RoundCable length: 10mREACH, RoHs compliant IN THE BOX1x celexon UHD Optical Fibre HDMI 8K 48Gbps Active Cable 10m, black All components used must support this feature.
AV Parts Master
This auction is about si This auction is about Fast 32-bit 10/100 network card Toshiba (XIRCOM) GlobalPort PX1010E-1NCO / R2BE-100 for Internet (DSL), for Ethernet also for OS/2 Win 3.x, Win NT 4.0, Win95, Win98 and Windows 2000 Not used, original package! unused and in original packaging; This solves the problem that a new network card, for example with Windows 95 98 OS/2 etc. doesn't work, will be solved! Condition: unused; Scope of delivery: 10/100 network card cardbus with driver software, original packaging, as shown You can find all of our streamers (tape drives) with us HERE. We have more - just click on the picture below and order: Do you need hard drives? Order with: Noh more SCSI Hard drives HERE, at Ebay:just click on the image! Our other products on eBay (just.
eBay
The celexon UHD Optical Fibre HDMI cable is HDMI 2.1 compliant and thus transmits signals at up to 48 Gbps with resolutions up to 8K (7680x4320p 60Hz with up to 12 bit colour depth) and 4K (4096x2160p 120Hz with up to 12 bit colour depth).The hybrid fibre optic cable with 4 glass fibres and 8 copper wires enables interference free transmission of high data rates even over very long distances. For this purpose, the electrical signal in the 'Source' connector is converted into light pulses, which are transmitted via the optical fibres to the 'Display' connector, where they are converted back into an electrical signal. It is therefore important that the installation direction of the cable is correct.celexon's cable is very thin with a diameter of 5.5 mm. With a bending radius of max. 30 mm and 10 circuits over the entire cable, it offers a very high degree of flexibility during installation. The very thin and narrow connector allows the cable to be plugged in even in places that are difficult to access. In addition, no other nearby ports are covered by plugging in this connector.With the help of the new dynamic HDR (High Dynamic Range) processes such as Dolby Vision and HDR10 , not only can a greater dynamic and colour range be displayed, making the picture more brilliant and rich in detail, the picture optimisation is adapted more individually to each picture, making even fast colour changes between large contrasts (e.g. picture change from white to black) more natural. Enhanced Audio Return Channel (eARC) is the new generation of ARC and is included in the HDMI 2.1 specification. This enhancement allows up to 32 audio channels to be transmitted with uncompressed 24 bit 192kHz data streams at up to 38 Mbps. This huge increase in bandwidth and speed means that all audio formats such as Dolby TrueHD, DTS HD Master Audio, Dolby Atmos and DTS:X can be transmitted without compression. Another feature of this cable is the Automatic Low Latency Mode (ALLM), which will be of particular interest to gamers. This reduces delays by removing the advanced video processing and thus offers the fastest possible response of the display.The prerequisite here, in addition to the ALLM enabled TV, is that the source devices provide a high quality video signal that can be played back immediately by the display. Thus, there should be no perceptible delay between the keystroke on the controller and the reaction time in the picture. This enables an even more direct and precise gaming experience. All connected and ALLM capable devices automatically switch to the appropriate mode with the shortest possible latencies via handshake. Even with an interconnected AV receiver, no additional settings need to be made. Variable Refresh Rate (VRR) is another feature that the HDMI 2.1 specification brings with it. Here, the refresh rate of the source device and the output device is synchronised in order to avoid jerkiness and tearing in the picture.The refresh rate can move freely in the range between 30Hz and 144Hz and adapt optimally in order to reproduce images that are free of interference and as sharp as possible.Without VRR, parts of the picture can overlap and several parts of the picture build up one after the other (screen tearing), for example in video games. An alternative to avoid these artefacts without VRR would be to reduce the frame rate completely or to set a lower resolution, whereby the quality of the picture would suffer greatly. The additional Ethernet channel makes it possible to connect Internet capable AV components to the in house network only via HDMI cable. It is sufficient if the TV is connected to the network via cable, the AV receiver or Blu Ray player then receives the network via HDMI cable. This eliminates the need for a network switch and additional cables. All celexon UHD HDMI fibre optic cables are individually tested for functionality using high quality measuring equipment. Special attention is paid to the EBR (Error Bit Rate) and only cables with maximum data transmission are sold.KEY INFORMATIONHDMI A plug to HDMI A plugStandard: Ultra High Speed HDMI with Ethernet HDMI 2.1 compliantTransmission rate: 48 GbpsMax. Resolution: 8K 7680x4320p 60Hz 4:2:0, 4K UltraHD 4096x2160p 120Hz 4:4:4Supported colour spaces: Deep Colour, x.v.Color .Supported audio standards: eARC, Dolby TrueHD, DTS HD Master Audio, Dolby Atmos, DTS:XOther features: HEC (HDMI Ethernet Channel), CEC (Consumer Electronic Control), ALLM (Auto Low Latency Mode), VRR (Variable Refresh Rate), 3D, HDCP 1.4 2.2 2.3, EDIDEMI FreeNo external power supply necessary 350 mW (max.) power consumptionConnector: gold plated contactsCable: hybrid cable with 4 glass fibres and 8 copper wires, PVC (LSZH) sheath with 5.5 mm Diameter, max. 30 mm bending radiusCable colour: WhiteCable type: RoundCable length: 70mREACH, RoHs compliant IN THE BOX1x celexon UHD Optical Fibre HDMI 8K 48Gbps Active Cable 70m, black All components used must support this feature.
AV Parts Master
eBay
The celexon UHD Optical Fibre HDMI cable is HDMI 2.1 compliant and thus transmits signals at up to 48 Gbps with resolutions up to 8K (7680x4320p 60Hz with up to 12 bit colour depth) and 4K (4096x2160p 120Hz with up to 12 bit colour depth).The hybrid fibre optic cable with 4 glass fibres and 8 copper wires enables interference free transmission of high data rates even over very long distances. For this purpose, the electrical signal in the 'Source' connector is converted into light pulses, which are transmitted via the optical fibres to the 'Display' connector, where they are converted back into an electrical signal. It is therefore important that the installation direction of the cable is correct.celexon's cable is very thin with a diameter of 5.5 mm. With a bending radius of max. 30 mm and 10 circuits over the entire cable, it offers a very high degree of flexibility during installation. The very thin and narrow connector allows the cable to be plugged in even in places that are difficult to access. In addition, no other nearby ports are covered by plugging in this connector.With the help of the new dynamic HDR (High Dynamic Range) processes such as Dolby Vision and HDR10 , not only can a greater dynamic and colour range be displayed, making the picture more brilliant and rich in detail, the picture optimisation is adapted more individually to each picture, making even fast colour changes between large contrasts (e.g. picture change from white to black) more natural. Enhanced Audio Return Channel (eARC) is the new generation of ARC and is included in the HDMI 2.1 specification. This enhancement allows up to 32 audio channels to be transmitted with uncompressed 24 bit 192kHz data streams at up to 38 Mbps. This huge increase in bandwidth and speed means that all audio formats such as Dolby TrueHD, DTS HD Master Audio, Dolby Atmos and DTS:X can be transmitted without compression. Another feature of this cable is the Automatic Low Latency Mode (ALLM), which will be of particular interest to gamers. This reduces delays by removing the advanced video processing and thus offers the fastest possible response of the display.The prerequisite here, in addition to the ALLM enabled TV, is that the source devices provide a high quality video signal that can be played back immediately by the display. Thus, there should be no perceptible delay between the keystroke on the controller and the reaction time in the picture. This enables an even more direct and precise gaming experience. All connected and ALLM capable devices automatically switch to the appropriate mode with the shortest possible latencies via handshake. Even with an interconnected AV receiver, no additional settings need to be made. Variable Refresh Rate (VRR) is another feature that the HDMI 2.1 specification brings with it. Here, the refresh rate of the source device and the output device is synchronised in order to avoid jerkiness and tearing in the picture.The refresh rate can move freely in the range between 30Hz and 144Hz and adapt optimally in order to reproduce images that are free of interference and as sharp as possible.Without VRR, parts of the picture can overlap and several parts of the picture build up one after the other (screen tearing), for example in video games. An alternative to avoid these artefacts without VRR would be to reduce the frame rate completely or to set a lower resolution, whereby the quality of the picture would suffer greatly. The additional Ethernet channel makes it possible to connect Internet capable AV components to the in house network only via HDMI cable. It is sufficient if the TV is connected to the network via cable, the AV receiver or Blu Ray player then receives the network via HDMI cable. This eliminates the need for a network switch and additional cables. All celexon UHD HDMI fibre optic cables are individually tested for functionality using high quality measuring equipment. Special attention is paid to the EBR (Error Bit Rate) and only cables with maximum data transmission are sold.KEY INFORMATIONHDMI A plug to HDMI A plugStandard: Ultra High Speed HDMI with Ethernet HDMI 2.1 compliantTransmission rate: 48 GbpsMax. Resolution: 8K 7680x4320p 60Hz 4:2:0, 4K UltraHD 4096x2160p 120Hz 4:4:4Supported colour spaces: Deep Colour, x.v.Color .Supported audio standards: eARC, Dolby TrueHD, DTS HD Master Audio, Dolby Atmos, DTS:XOther features: HEC (HDMI Ethernet Channel), CEC (Consumer Electronic Control), ALLM (Auto Low Latency Mode), VRR (Variable Refresh Rate), 3D, HDCP 1.4 2.2 2.3, EDIDEMI FreeNo external power supply necessary 350 mW (max.) power consumptionConnector: gold plated contactsCable: hybrid cable with 4 glass fibres and 8 copper wires, PVC (LSZH) sheath with 5.5 mm Diameter, max. 30 mm bending radiusCable colour: BlackCable type: RoundCable length: 6mREACH, RoHs compliant IN THE BOX1x celexon UHD Optical Fibre HDMI 8K 48Gbps Active Cable 6m, black All components used must support this feature.
AV Parts Master
Cardbus ethernet ii 10/100 32-bit; pcmcia(w/dongle),(43).
eBay
The celexon UHD Optical Fibre HDMI cable is HDMI 2.1 compliant and thus transmits signals at up to 48 Gbps with resolutions up to 8K (7680x4320p 60Hz with up to 12 bit colour depth) and 4K (4096x2160p 120Hz with up to 12 bit colour depth).The hybrid fibre optic cable with 4 glass fibres and 8 copper wires enables interference free transmission of high data rates even over very long distances. For this purpose, the electrical signal in the 'Source' connector is converted into light pulses, which are transmitted via the optical fibres to the 'Display' connector, where they are converted back into an electrical signal. It is therefore important that the installation direction of the cable is correct.celexon's cable is very thin with a diameter of 5.5 mm. With a bending radius of max. 30 mm and 10 circuits over the entire cable, it offers a very high degree of flexibility during installation. The very thin and narrow connector allows the cable to be plugged in even in places that are difficult to access. In addition, no other nearby ports are covered by plugging in this connector.With the help of the new dynamic HDR (High Dynamic Range) processes such as Dolby Vision and HDR10 , not only can a greater dynamic and colour range be displayed, making the picture more brilliant and rich in detail, the picture optimisation is adapted more individually to each picture, making even fast colour changes between large contrasts (e.g. picture change from white to black) more natural. Enhanced Audio Return Channel (eARC) is the new generation of ARC and is included in the HDMI 2.1 specification. This enhancement allows up to 32 audio channels to be transmitted with uncompressed 24 bit 192kHz data streams at up to 38 Mbps. This huge increase in bandwidth and speed means that all audio formats such as Dolby TrueHD, DTS HD Master Audio, Dolby Atmos and DTS:X can be transmitted without compression. Another feature of this cable is the Automatic Low Latency Mode (ALLM), which will be of particular interest to gamers. This reduces delays by removing the advanced video processing and thus offers the fastest possible response of the display.The prerequisite here, in addition to the ALLM enabled TV, is that the source devices provide a high quality video signal that can be played back immediately by the display. Thus, there should be no perceptible delay between the keystroke on the controller and the reaction time in the picture. This enables an even more direct and precise gaming experience. All connected and ALLM capable devices automatically switch to the appropriate mode with the shortest possible latencies via handshake. Even with an interconnected AV receiver, no additional settings need to be made. Variable Refresh Rate (VRR) is another feature that the HDMI 2.1 specification brings with it. Here, the refresh rate of the source device and the output device is synchronised in order to avoid jerkiness and tearing in the picture.The refresh rate can move freely in the range between 30Hz and 144Hz and adapt optimally in order to reproduce images that are free of interference and as sharp as possible.Without VRR, parts of the picture can overlap and several parts of the picture build up one after the other (screen tearing), for example in video games. An alternative to avoid these artefacts without VRR would be to reduce the frame rate completely or to set a lower resolution, whereby the quality of the picture would suffer greatly. The additional Ethernet channel makes it possible to connect Internet capable AV components to the in house network only via HDMI cable. It is sufficient if the TV is connected to the network via cable, the AV receiver or Blu Ray player then receives the network via HDMI cable. This eliminates the need for a network switch and additional cables. All celexon UHD HDMI fibre optic cables are individually tested for functionality using high quality measuring equipment. Special attention is paid to the EBR (Error Bit Rate) and only cables with maximum data transmission are sold.KEY INFORMATIONHDMI A plug to HDMI A plugStandard: Ultra High Speed HDMI with Ethernet HDMI 2.1 compliantTransmission rate: 48 GbpsMax. Resolution: 8K 7680x4320p 60Hz 4:2:0, 4K UltraHD 4096x2160p 120Hz 4:4:4Supported colour spaces: Deep Colour, x.v.Color .Supported audio standards: eARC, Dolby TrueHD, DTS HD Master Audio, Dolby Atmos, DTS:XOther features: HEC (HDMI Ethernet Channel), CEC (Consumer Electronic Control), ALLM (Auto Low Latency Mode), VRR (Variable Refresh Rate), 3D, HDCP 1.4 2.2 2.3, EDIDEMI FreeNo external power supply necessary 350 mW (max.) power consumptionConnector: gold plated contactsCable: hybrid cable with 4 glass fibres and 8 copper wires, PVC (LSZH) sheath with 5.5 mm Diameter, max. 30 mm bending radiusCable colour: BlackCable type: RoundCable length: 70mREACH, RoHs compliant IN THE BOX1x celexon UHD Optical Fibre HDMI 8K 48Gbps Active Cable 70m, black All components used must support this feature.
AV Parts Master
Cc ethernet10/100-upgradable;0340g;pcmcia(no dongle),(38).
eBay