be free from separating and adhesion-reducing substances, e.g. dust, sludge, grease, rubber abrasion, Substrate preparation must be carried out in accordance with DINEN 14879-1:2005, 4.2 ff. to execute. (Larger defects and cracks must be repaired beforehand using suitable products from the SCHOMBURG range.) delivered. The B component is added to the A component. It is important to ensure that the hardener Note: During processing, care must be taken to ensure that the material is evenly distributed by “flooding”. In the case of a two-layer design, after the first layer has hardened, the fresh primer of the second layer is applied with After curing, the unbound quartz sand portion must be carefully removed before a roll/leveling coating, scratch coat or screed is applied. The mixe.
eBay
After the surface has been prepared, clean the relevant surfaces with the cleaning agent ASO-R008 (dilution according to technical specifications). Leaflet from Please note: There must not be a continuous film of water on the surface of the concrete! The substrate must not be dry yet - as it dries, there is a risk that the oil that will rise again will prevent the special primer from adhering to the surface When adding quartz sands, make sure that they are fire-dried and, like other additives, also at a certain temperature After the scattered layer has hardened, the unbound quartz sand is carefully removed before the next work step. After a waiting time of approx. 12 hours to 24 hours can be achieved with an ASODUR coating system or the floor covering structure Pour the mortar.
eBay
As a primer for PCI sealants and PCI coatings on cementitious substrates, mastic asphalt screeds, ceramic coverings, synthetic resin coatings and wooden substrates. As a primer for interior floors before applying floor leveling/filling compounds, also for subsequent parquet bonding on Substrates with adhesive residues from dispersion, reaction resin, water-soluble (e.g. sulphite waste liquor adhesives) and bitumen-containing flooring adhesives. Moisture barrier (two applications required) up to residual moisture = 7 CM-% in the substrate for cement screeds (on underfloor heating up to residual moisture = 5 CM-%) when used as a primer before applying floor leveling compounds with subsequent laying of textile and elastic coverings or parquet. Solvent-free according to TRGS 610, no poll.
eBay
be free of separating and adhesion-reducing substances, e.g. dust, stillage, grease, rubber abrasion, (Larger defects and cracks must be repaired in advance using suitable products from the SCHOMBURG range.) The material temperature during the mixing process should be approx. +15°C. Do not mix the mixed material process in the delivery container! Pour the mixture into a clean mixing bucket and stir carefully again. Intermediate compaction is absolutely necessary in accordance with the specified material layer thicknesses. In the case of a two-layer design, the fresh primer is added to the second layer after the first layer has hardened After curing, the unbound quartz sand portion must be carefully removed before a rolling/leveling coating, scratch filler or screed is applied. T.
eBay
be free from separating and adhesion-reducing substances, e.g. dust, sludge, grease, rubber abrasion, Substrate preparation must be carried out in accordance with DINEN 14879-1:2005, 4.2 ff. to execute. (Larger defects and cracks must be repaired beforehand using suitable products from the SCHOMBURG range.) delivered. The B component is added to the A component. It is important to ensure that the hardener Note: During processing, care must be taken to ensure that the material is evenly distributed by “flooding”. In the case of a two-layer design, after the first layer has hardened, the fresh primer of the second layer is applied with After curing, the unbound quartz sand portion must be carefully removed before a roll/leveling coating, scratch coat or screed is applied. The mixe.
eBay
After the surface has been prepared, clean the relevant surfaces with the cleaning agent ASO-R008 (dilution according to technical specifications). Leaflet from Please note: There must not be a continuous film of water on the surface of the concrete! The substrate must not be dry yet - as it dries, there is a risk that the oil that will rise again will prevent the special primer from adhering to the surface When adding quartz sands, make sure that they are fire-dried and, like other additives, also at a certain temperature After the scattered layer has hardened, the unbound quartz sand is carefully removed before the next work step. After a waiting time of approx. 12 hours to 24 hours can be achieved with an ASODUR coating system or the floor covering structure Pour the mortar.
eBay
Mixing ratio, addition of levelling/scratch filler ASO-FF from 0.02 parts by weight to 0.03 parts by weight After the sprinkled layer has hardened, the unbound quartz sand is carefully removed before the next work step. The quartz sand (Ø 0.1-0.6 mm) is added to the previously homogeneously mixed and repotted resin and hardener components After the sprinkled primer layer has hardened, carefully remove the unbound quartz sand before application. Add the quartz sand (Ø 0.06 - 1.5 mm or Ø 0.06 - 3.5 mm) in the correct amount (3:25) into the compulsory mixer (e.g. type: Zyklos or UEZ) The mixed screed is applied to the still fresh primer in at least approx. 5 mm layer thickness applied, leveled with gauges and Stir the quartz sand (Ø 0.06-1.5 mm) homogeneously into the mixed ASODUR-S.
eBay
Consumption per mm layer thickness (compensation and scratch filling with quartz sand) approx. 1.6 kg/m⊃2; Dry to moist (in accordance with the DAFSTB "Guideline for Protection and Maintenance of Concrete Parts") The recovery of the quartz sand (Ø 0.1-0.6 mm) takes place in the previously homogeneous mixed and repotted resin and hardening component When applying on vertical and inclined areas, the addition of ASO-FF (2-3 weight of weight) is recommended. The quartz sand (Ø 0.06 - 1.5 mm or Ø 0.06 - 3.5 mm) in a coordinated amount (3:25) in the compulsory mixer (e.g. type: type: cyclos or Uez) The mixed screed is on the still fresh primer in at least approx. 5 mm layer thickness applied, withdrew with teachings and Present the quartz sand (Ø 1.0-4.0 mm) in a coordinated quantity (.
eBay